Great Video. It's these little details that I've been researching lately. Thanks!
@DanielOrtegoUSA
Жыл бұрын
Nice camera work and well explained so thanks for posting. ✌️
@w8e0s6t
4 жыл бұрын
Cool vid bro str8 to the point and actually helped ima go with the mechanical gauge 😎😁been using those for years with no problems ...💯👌🤙👍
@paulj541
4 жыл бұрын
Very good video. I'm doing the gauge thing now and this video was a great help, thank you.
@youngladd9169
6 жыл бұрын
Ya Kevin that thing is going to be a pain in the ass if it goes, best bet to go with the copper. Is you haven't already got it in. The oil pressure was what did me in on my last motor.
@Sgt.Slides
6 жыл бұрын
I've been hearing some bad stuff. pay day, i'm pulling that out and going with another electronic.
@tylerparker3024
3 жыл бұрын
Whats the bad stuff you heard? I was considering using this style gauge
@stevenlawrence1946
6 жыл бұрын
Do not use the nylon hose!!!!! It will not hold up at all. make copper lines and call it a day. That nylon hose will blowup in a week or less.
@MiBurnout
2 жыл бұрын
Exactly! Who wants 220° oil spraying in their face? Or all over your legs... preach!!!! #copperisbetter
@TheKellisunshyne
2 жыл бұрын
This is truth!!!
@jeanantoine8618
6 жыл бұрын
Man I had a nylon line come off on me one day two and a half court oil inside of my car used copper line the best
@dannyg7823
2 жыл бұрын
You can buy a oil pressure guage kit for the oil cooler. Just a block, tapped for a line.
@diggasingh3063
2 жыл бұрын
Where can i find that at??
@dannyg7823
2 жыл бұрын
Search under oil cooler delete
@justmedontknowdoyou7860
2 жыл бұрын
It's called a Compression Fitting Nut,,the 'BELL" looking thing is called Ferrell..Just an FYI everyone...DO NOT USE THAT plastic tubing get some 1/8" copper tubing....As you can over tighten the nut an cut it and over time it will become brittle..Think a minute how much of a mess that would be in side. High pressure and "HOT" oil
@brianoconnor5255
6 жыл бұрын
Getting close man!
@jeremyrock7446
5 жыл бұрын
I like your paint scheme on your engine 👍
@jeffswafford6017
4 жыл бұрын
cool guy, motor head
@jbl8916
4 жыл бұрын
So u disconnect the oil sensor
@ashleypope3363
4 жыл бұрын
Did you just bin the stock sender?? Why?? One less warning light...Id prefer a tee piece to run both if possible...and yeah, I'd run a braided hose anywhere where there's heat...
@Sgt.Slides
4 жыл бұрын
I ended up removing the mechanical set up and running an gauge.
@That_ac_dude
8 ай бұрын
PSA If you don’t use a brass insert in the nylon hose it WILL leak.
@Keeterbob
4 жыл бұрын
Why did you need that adapter? Didn’t the gauge come with one?
@Sgt.Slides
4 жыл бұрын
the gauge came with some universal adapters, however, i wanted to get pressure from the OEM location and none of the supplied adapters were the correct size for that.
@betosgarage
4 жыл бұрын
What should the oil pressure read bro? Mine reads between 25-50
@Sgt.Slides
4 жыл бұрын
a healthy motor should be above 50psi when cold and 25 is at idle when warm.
@betosgarage
4 жыл бұрын
Premium Fuel Mag thanks bro
@ASEWorldClassTech
8 ай бұрын
I've seen those Orielly's gauges blow up and squirt oil in peoples cars.
@Sgt.Slides
8 ай бұрын
i ended up going electronic
@nickhendo3960
4 жыл бұрын
Do you Krimp the fittings onto the nylon?
@Sgt.Slides
4 жыл бұрын
no, there are little rings that hold the pressure.
@mexibeast3602
4 жыл бұрын
Was the nilon tube more thicker on one end
@Sgt.Slides
4 жыл бұрын
no
@Miami_Bad_Boy_BOSS
2 жыл бұрын
What adapter are you using?
@Sgt.Slides
2 жыл бұрын
It's captioned in the video boss!
@Miami_Bad_Boy_BOSS
2 жыл бұрын
@@Sgt.Slides My bad man, I didn't make my self clear. I meant the the plate adapter you're using, down off the oil pan. I don't recognize the logo. 5:04
@brandonconover2297
5 жыл бұрын
This guy: "Oil pressure is very important so i wanted to make sure i had a good gauge" Also this guy: "I went with nylon hose instead of copper line"
@Sgt.Slides
5 жыл бұрын
This guy never installed the nylon hose and went electronic instead.
@justinwagner1078
5 жыл бұрын
Brandon Conover if you protect the nylon hose by putting a cover around the line it works just fine
@jbl8916
4 жыл бұрын
How much white line did u put in ....
@zachbrave2082
Жыл бұрын
Use Copper tubing!!!!!!
@Sgt.Slides
Жыл бұрын
I ended up using this gauge only for testing purposes, i've heard too many bad things about getting oil in the car, copper lines or not. I went for the electronic sensor.
Пікірлер: 43