Just removed the valve cover from my e28-thank you for this and other vids. Be sure to check the banjo bolts on the camshaft spraybar. My 535 has 91k miles and the rear banjo bolt had completely backed itself out-meaning no oil to the rear cam lobes and rockers. Keep up the great content. I’m about to do suspension work on my e28, maybe I will make a video about it.
@nathanhagerman9928
5 ай бұрын
I’m loving all the e28 content. Please keep doing what you’re doing
@Robertgio
5 ай бұрын
My Man you have done a PHENOMENAL JOB on this e28! ive been following the entire series along! please take my e28 535 next into your shop! PS Manifold and the bracket from valve cover to manifold. that surface corrosion is killing my OCD!
@СергейЛитко-н5у
5 ай бұрын
Не нажимай на капот когда закрываеш, а то на капоте могут остаться вмятины.
@MissionmadeAirsoft
2 ай бұрын
@@Robertgio mann that bracket rust is KILLING me. I attempted to pull off the manifold- but turns out you need to remove basically all the coolant tubes to remove manifold. Sadly that was the only video I never ended up posting.. when I decide to rebuild my coolant system is when the manifolds coming off. Thanks for the luv
@EricBostonPaintings
2 ай бұрын
So glad I found your content! I have a 1985 zinnobarrot 535i with over 300k miles I'm currently working on. Ever do the valve adjustment? I did.... And I'm not sure it's quite right. There's a lot of debate on gap, and I think I ran mine just a hair on the loose side, so it's a little clacky. Anyway, good luck and keep up the great work!!
@MissionmadeAirsoft
2 ай бұрын
@@EricBostonPaintings I had mine done during the post purchase inspection day after I bought mine; so I never had the pleasure doing it myself. But as long as you have the right gauge and feel the smallest amount of resistance possible you’re in good shape!
@СергейЛитко-н5у
5 ай бұрын
Не нажимамай на капот когда закрываеш, лучше захлопни чем вмятины останутся от рук.😅
@masonbarnyard
3 ай бұрын
Your oil pressure light should not stay on that long on start up, even when cold. 2 seconds max. Try replacing the oil pressure switch, otherwise you may be due for an oil pump. Also, I had a long crank like, then did the single in-tank fuel pump mod, and now it starts up in 1 second.
@MissionmadeAirsoft
2 ай бұрын
It’s just a quirk, when you pull and release the E break light goes off immediately. Good eye tho
Пікірлер: 10