i had a guy drill a well with one of these and the water is perfect and he only went 60 ft down.the deeper you go the more sulphur you'll get with the air rock drill
@SuperHennessyvsop
11 жыл бұрын
MAN!! those guys built just about everything. B.E
@cgspeeddemon1
11 жыл бұрын
the 22W shown in this video can go up to about 1000 feet depending on well size. my familly owns several BE rigs and for the big wells we use a 48L capable of depths over a mile down and 36" in diameter
@andytheguy5076
6 жыл бұрын
My grandpa dose it different, he only uses"starter bits" for drilling and he only has to drill Less than 100 feet and when the bits start flattening out he uses the side of his anvil to forge them back into shape. He uses simplex jacks and when he drills a well that is bad and he has to pull pipe he has 2 Watson Stillman 60 ton hydraulic jacks. I think he dose pretty good
@letsdig18
14 жыл бұрын
@tunespt he said they usually have to dig around 150- 300 feet deep in this area.
@javiersantana449
Жыл бұрын
I want to buy older drilling machines like this one to export to Mexico..
@JasonWaterfalls13
14 жыл бұрын
Thats a pretty cool old rig. Hey if it works, right!
@robertball4509
2 жыл бұрын
Rotary bit on a cable drill?
@RJM159
14 жыл бұрын
"Truck all jacked up"
@kennethhowell8517
10 жыл бұрын
Ha ha this is what's up with the roller cone bit,instead of buying a 10 inch cable tool bit which cost over 1.500 dollars I used a old pin from a drill bit and welded it in the top of the roller cone to do my 10 inch hole's,,I have 60 dollars in this mother ha ha.
@tunespt
14 жыл бұрын
@letsdig18 Quite a task for a cable rig imho, if you can, tape it, I would like to see it working.
@daewooparts
14 жыл бұрын
old school but it gets the job done
@kenjett2434
7 жыл бұрын
That rotary come bit is not designed for that type of drilling. It won't cut properly and worse a good chance you will knock cones off and habe them in the hole to deal with. Obviously you a good equipment operator but clueless on these old pounder style drilling rigs. I grew up running these type rigs from shallow to very deep.
@tunespt
14 жыл бұрын
How deep can it go? Looks like more that 30 meter (64 feet) on mid soils can be quite a task for it. I used to work on a rig, but was mounted on a cat threaded chassis and uses oil pressure, can go around 500meter (1600fett).
@Dailydieseldose315
14 жыл бұрын
If it ain't broke, don't fix it.
@MC-gp9ke
7 жыл бұрын
obviously the Tri cone drill bit is not for the ole cable tool rig.
@Pete379andCat3406
14 жыл бұрын
wow dont see to many cable rigs anymore
@akinyemiolakunle4626
4 жыл бұрын
Can this type of rig go 250m in a sedimentary formation?
@gerardolucas-vaquerozaball7351
4 жыл бұрын
el sistema de percusión el mejor para formaciones sedimentarias
@gqp4800
Жыл бұрын
Yes
@yshyaalhosen5888
Жыл бұрын
I know this job
@Mi-pd3fk
7 жыл бұрын
cuanto por tu macina
@franciscoev
12 жыл бұрын
I have a machine bucyrus erie 20w someone could tell me if you will be able to drill 200 meters to a diameter of 18 inches
@gqp4800
Жыл бұрын
Yes, with the right amount of length of bailor and drill cable. 30 years in MD master
Пікірлер: 25