you perfectly answered what i had been wondering 👍🏼👍🏼
@Samuele_Lini_ARS
3 жыл бұрын
Perfect explained. Damn, you remind me Chris Cornell
@uscuttervideos
3 жыл бұрын
lol, you are funny! I am not the biggest fan of this video but it did get me to start creating my own videos and eventually take creating the videos. This video will show you a better look at how to create and set up an image with Ghost. kzitem.info/news/bejne/04aJn6WraYd6pY4
@uscuttervideos
3 жыл бұрын
Then here is a link to the personal channel with all the Ghost stuff I made at home. kzitem.info/rock/VWCvQRIOwcMSWM5xQqP2rw
@SceneOfAction
4 жыл бұрын
If you ever get the "memory supply error" I fixed it by removing the little chip from the top of the toner and replaced it with the one from an empty black cartridge. This tricked the printer into thinking it was just a regular old black cartridge. Be very careful not to damage the chip while removing and replacing it from the original black cartridge. Put a point on the board for the common consumer please :D
@SceneOfAction
4 жыл бұрын
the tweezers from an ifixit kit.
@SceneOfAction
4 жыл бұрын
@Kucee's Vlogs i couldn't find any other way.
@davidminnich828
3 жыл бұрын
Would this work for waterslide decals and if so would a stand alone white decal on clear waterslide come out right without the need of a background color. Also would this work with other laser printer or only this model of printer. Thank you for your time and help.
@uscuttervideos
3 жыл бұрын
I have used it with the Forever Waterslide papers successfully. You can find a complete list of all of the printers that we carry cartridges for here - www.uscutter.com/Ghost-Toner-Cartridges
@thenanook
3 жыл бұрын
thank you you save me so much time
@tinataylor9327
6 жыл бұрын
I recently purchased the HP Color Laser Jet Pro M452nw and the white toner direct from Ghost. Ran couple of test prints today on black 100% cotton using various full color graphic and text designs in .png format. IMO, the full color with white doesn't feel much different than a good quality thinner opaque paper for darks (still has noticeable hand/feel). Definitely no full raster background image, with out rasterization, would provide close to screen print feel. Typography design, vector line art, in color w/wht, or b/w have less of a hand. If I'm looking to do all white/single color in those types of graphics...I can get softer hand upon initial printing if use HTV, Flex Soft No-Cut or Koncert T laser paper. If unable to find affordable non-convoluted method of rasterizing full background images, I may be looking to sell printer and toner.
@nicolehicks5904
6 жыл бұрын
Tina Taylor If you have Photoshop you can download this action created by forever that will enable quick rasterization. Drop down the plus sign on the left that says how to rasterize Images in Photoshop. www.whitetonertransfer.com/support/downloads-1/
@tinataylor9327
6 жыл бұрын
Thank you Nicole. I use PSE 11 and notice the document states no specific version of PS is needed so I'll see if this works.
@tinataylor9327
6 жыл бұрын
US Cutter - please consider tutorials on various image formats to see comparison, if any, when working with .eps, .pds, .pdf, .png, .tiff, or .jpg
@Ruck.Norris
6 жыл бұрын
Export the file type & stick to png
@dj1beat828
4 жыл бұрын
Well explained.
@unforgettablememories2999
4 жыл бұрын
Hi , is there any different between HP color toner ,and Ghost color toner for the quality . Please let me know , thanks
@uscuttervideos
4 жыл бұрын
You can mix and match by using regular HP toners with a single Ghost White toner cartridge, or to get more vivid fluorescent colors use fluorescent Ghost toner cartridges for all the slots. It depends on what you want to achieve with your image.
@tinataylor9327
6 жыл бұрын
Hi, thanks for providing this to tutorial on a lower-cost White toner printer. Will you in the future be providing a demo using Paropy CL trim free dark paper?
@shelbylynn9623
5 жыл бұрын
PLEASE make one for the newer m479fdw!!
@uscuttervideos
5 жыл бұрын
Yes, we a planning to make this available in the future.
@johnmeric492
4 жыл бұрын
Hi Josh great tutorial, i just bought hpm254 new printer with forever no cut laser dark transfer paper, put after the pring i can see a scratch line top to bottom, how can i fix this its a brand new printer.
@aliwizani9180
6 жыл бұрын
What is the paper used on the black tshirt? Since we are using a what ink as a base can the laser light paper be used on dar garment too?
@uscuttervideos
6 жыл бұрын
For printing white on dark garments using Ghost white toner in a laser printer, we recommend Forever Laser Dark Paper www.uscutter.com/Forever-Laser-Dark-Low-Temp
@gwapoako7357
4 жыл бұрын
i have 2 question 1. what is the name of paper 2. all laser printer can print that kind of paper?
@jc-xw4oj
4 жыл бұрын
Grate video but ..link to paper . link to printer . Link to exact white toner for this printer
@uscuttervideos
4 жыл бұрын
www.uscutter.com
@voltamagentaartesgraficas3273
4 жыл бұрын
Boa tarde a Hp laser jet pro m254nw é boa para usar o toner BRANCO. Obrigada
@MCJesus
3 жыл бұрын
sim, vc pode usar, eu tenho ela
@wailbens6947
5 жыл бұрын
Man ur a genious u helped me a lot
@karenbroughtonn.z1629
4 жыл бұрын
thank you
@adamd.94
4 жыл бұрын
Hi. Can I print ghost white with a white background or does in need to be transparent? Thanks!
@uscuttervideos
4 жыл бұрын
if that background is all black, then it will print using the ghost white cartridge.
@SceneOfAction
5 жыл бұрын
This stuff works great.
@davedogge2280
3 жыл бұрын
Hi, I've been eyeing up the Ghost White toner cartridge for my HP Laser Jet 200 MFP printer in order to print decals for my Warhammer miniatures. What is the advantage of using the Ghost White toner cartridge method instead of just printing on a white laser decal paper ?
@uscuttervideos
3 жыл бұрын
The only issue with that I would have is that is lining up the registration on some of the smaller detailed things. To create CMYK image with Ghost, you have to run the paper through the printer twice. Once with CMYK toner and the other with the White toner cartridge inserted. The registration will never line up perfectly and could make it harder on smaller things.
@davedogge2280
3 жыл бұрын
@@uscuttervideos I see, so maybe instead of doing the two pass with the ghost while toner for smaller decals I would be better off just printing them onto White laser decal paper ? The disadvantage of doing that maybe would be ...? possibly the white outline around the edge? I dunno.
@1Fotobook
3 жыл бұрын
What is the printer model?
@uscuttervideos
3 жыл бұрын
M452DW
@jrielcarrion6619
3 жыл бұрын
is the white toner available for the HP - LaserJet Pro M454dw Wireless Color Laser Printer??
@uscuttervideos
3 жыл бұрын
That will be whenever someone decides to make 3rd party chips for replacement cartridges that work with the M454.
@jogarvizah2731
5 жыл бұрын
i would print the white background first and then print the artwork over it.
@uscuttervideos
5 жыл бұрын
You can print the white toner first (underprint) or last (overprint) depending on what you are trying to achieve. For printing on T-shirts with Forever Laser Dark 2-step transfer paper, you will typically want to print the white background last (overprint) so that the white layer ends up on the bottom, closest to the T-shirt.
@jogarvizah2731
5 жыл бұрын
USCutter Videos thanks!! ✌🏼
@jantzenalcantara2275
4 жыл бұрын
..sir hp laser jet m154a is this the same to the toner you use sir...
@stephen5426
4 жыл бұрын
Why can't your purchase this paper anymore ? I've tried to find it everywhere and it's not available only the white or colored versions of Forever Dark.
@joanfiguerola7066
4 жыл бұрын
Is there any way to improve the white and colour alignment? The white layer seems to be off a few mm...
@uscuttervideos
4 жыл бұрын
The issue you are describing is that when the paper is fed through the printer the second time it might not feed through exactly the same. To help minimize alignment problems you should always make sure that the paper feed path, the guides at the side and the paper itself is as straight as possible. In terms of the artwork, you will want to make the bottom white layer slightly smaller than the top layer so that if the paper feed is off by a few mm, then the white will not peek out on one side. Generally you want to design your artwork assuming that the white and color layers may be off by a few mm. This may mean adjusting how thick borders are and other considerations.
@ofallstardrywallllc4351
5 жыл бұрын
Puedo usarla con papel láser light 145 Premium transfer paper???
@kimnegaard4714
5 жыл бұрын
Can this toner be used like regular laser toner on non-transfer paper for non-transfer purposes? For example, I’d like to print white text on kraft brown colored paper.
@uscuttervideos
5 жыл бұрын
Yes! Wedding invitations, restaurant menus etc. can be printed with white toner directly onto dark kraft paper. Just swap out the black toner cartridge and replace it with a Ghost white toner cartridge. The printer thinks it is printing black, but the cartridge is providing white instead.
@kimnegaard4714
5 жыл бұрын
Awesome! Thanks for the quick reply! Size wise, does it have to swap with black or can it replace any slot? I don’t really use the color cartridges, so I’d rather swap it with cyan (or whichever color) and then setup my “white” print jobs with pure cyan text, so it would print white. Then I could keep them both loaded all the time.
@uscuttervideos
5 жыл бұрын
@@kimnegaard4714 Interesting idea, however the printer reads a chip on each cartridge to make sure the user has not put the wrong color in the wrong slot. Ghost white toner cartridges have a chip that identifies them as black to the printer.
@kimnegaard4714
5 жыл бұрын
USCutter Videos: good to know. Thanks!
@mayankpatel4177
4 жыл бұрын
I want to buy new white cartridge for M452.From where I can buy? INDIA
@uscuttervideos
4 жыл бұрын
We ship internationally as does Ghost.
@BullworthAcademy4
3 жыл бұрын
Whats with the alignment?
@uscuttervideos
3 жыл бұрын
1st thing - Awesome username 2nd - to print CMYK and WHITE designs you have to run the transfer through the printer twice. First time with CMYK toners in and then the second time with the white toner inserted. when you do this it won't always line up, so you need to compensate for this.
@thecraftguy21
3 жыл бұрын
Will this last sometime with out the color washing off at the first wash ? Thank you
@uscuttervideos
3 жыл бұрын
If you do it with the correct paper it can last 100+ washes.
@craftingwithbcapparelmore9356
4 жыл бұрын
Do we have to use photo shop idk how to use it
@uscuttervideos
4 жыл бұрын
You can use any similar photo manipulation program, including free software like GIMP. This video shows you how to use GIMP instead of Photoshop: kzitem.info/news/bejne/y4ycsIKAp311poI
@diamondprincess1045
4 жыл бұрын
Can you print real world photos
@uscuttervideos
4 жыл бұрын
You can print photos to the same extent that any laser toner printer can. If printing on garments, you will likely want to further "rasterize" the photo so that the small spaces between the dots allow the garment to feel softer.
@mgrpmdnis
5 жыл бұрын
Do you sell white toner for the HP M 54dv and at what price and can I buy one if I take Serbia?
@Cfeldersproduction007
4 жыл бұрын
Can you use it in brother laser printers
@uscuttervideos
4 жыл бұрын
At this time we are only supporting HP printers
@Cfeldersproduction007
4 жыл бұрын
Is there a white toner out there for brother.
@michaelc6553
4 жыл бұрын
Can you use Corel draw program with this? And how. Thanks
@dimitrinagarov
6 жыл бұрын
Hello, I have a problem when Peeling the sheet FOREVER LASER LIGHT, the design remains on the sheet and does not transfer on the tshirt, the tshirt remains white is it due to a wrong setting of the printer or the heat press? for info, I use an HP LASERJETPRO 200 printer, which works with a white cartridge
@uscuttervideos
6 жыл бұрын
Are you sure you are printing on the correct sheet? The toner prints onto the A sheet, then the adhesive from the B sheet is added to the A sheet in a heat press (hot peel) and finally the A sheet is transferred to the T-shirt (cold peel).
@Eambasy
4 жыл бұрын
hp laserjet pro 400 color m451dn can I use this one
@NeuArtChan
5 жыл бұрын
I can only buy forever laser dark no cut here in germany... can I use this with this method but only buy the a foil without the b foil?
@uscuttervideos
5 жыл бұрын
The method shown here requires both A and B foils to be used, since the B foil is what adds the adhesive needed to get the design to stick to the garment. There are certain one step papers that can be used, however your end result might not have the same feel or wash durability. It depends on what your requirements are. You can see papers for specific purposes at: www.uscutter.com/Heat-Transfer-Paper USCutter has spent a lot of hours testing which papers work best for Ghost - You can watch the entire video at: kzitem.info?o=U&video_id=TYbiLc2k8qY
@Localandlive
4 жыл бұрын
Can you Print on white fabrics/ shirts with the "forever Laser Dark No cut ? or any " dark A and B transparent paper?
@uscuttervideos
4 жыл бұрын
Yes, you can print on white fabrics, but it seems that would defeat the need for the Ghost white underlay.
@Localandlive
4 жыл бұрын
@@uscuttervideos I am having an issue with your white GHOST toner sticking to a dark royal blue shirt ? any suggestions? The white sticks to the the Forever transfer paper and not the shirt?
@ofallstardrywallllc4351
5 жыл бұрын
I can use it with. paropy laser light 145 Premium transfer paper ???
@Parkhead_workshop
5 жыл бұрын
Why does nobody make an inexpensive 5 toner printer? I'd spend a couple grand if I could have black and white toners working together seamlessly (preferably in A3). The alternative seems to be to buy two standard laser printers, and have one set up for black and one set up for white - such a waste of space?!
@uscuttervideos
5 жыл бұрын
You have identified the most practical solution - have two identical printers, one for black and the other for white. This avoids the need to swap the cartridge. The reason there are no inexpensive 5 toner printers relates to demand. There are millions of people who need a standard printer for regular home and office printing, but only specialized people need a small printer that can handle white. Indeed the fact that you are specialized and can print in white is what makes your offering unique and compelling.
@SA77888
6 жыл бұрын
What does it look like when you print white ink on white paper..........could you use it to create a simulated watermark please???
@uscuttervideos
6 жыл бұрын
At the 0:28 second point of this video you can see how white toner on white paper is being used. kzitem.info/news/bejne/uIWBk2mag3aFiWk
@waynevdwalt9070
6 жыл бұрын
Can these white toners print onto Tyvek without melting it. I'm wondering is this is a cold fusion or cooler fusion laser process. We currently screen print onto bag tags that are colours, I need to put white writing down onto that.
@uscuttervideos
6 жыл бұрын
That would depend on the melting temperature of the Tyvek. We have had no problems printing on bags of various types. The third photo on our product page shows an example: www.uscutter.com/HP-M452dw-Printer-White-Ink and you can also see an example of printing on a paper bag 43 seconds into the following video: kzitem.info/news/bejne/uIWBk2mag3aFiWk
@diamondprincess1045
4 жыл бұрын
What would happen if I ran forever laser light through this system it says oki only
@uscuttervideos
4 жыл бұрын
Where are you seeing it say OKI only? You might be looking at an older document. There should be nothing preventing you from using Forever Laser Light with Ghost White toner.
@randcproductsservicesllc2794
6 жыл бұрын
Can I use this printer with the Magic Touch paper.. i.e. WOW 7.8 Weedless Dark and T.One Weedless Light
@uscuttervideos
6 жыл бұрын
We have not tested that particular brand of paper so you would have to experiment on your own to decide.
@WHITE888-
6 жыл бұрын
What does it look like when you print white ink onto white paper? Can you make a simulated watermark with it?
@uscuttervideos
6 жыл бұрын
At the 0:28 second point of this video you can see how white toner on white paper is being used. kzitem.info/news/bejne/uIWBk2mag3aFiWk
@tylercarney9168
3 жыл бұрын
where can I buy the white ink cartridge? and for how much?
@uscuttervideos
3 жыл бұрын
It is only white toner cartridges. www.uscutter.com/Ghost-Toner-Cartridges
@jantzenalcantara2275
4 жыл бұрын
..what model of hp toner do you use sir?..it is hp laser printer sir?..thank you..
@uscuttervideos
4 жыл бұрын
We sell toner cartridges for a number of different HO models. You can see our selection of Ghost toner compatible cartridges here: www.uscutter.com/Ghost-Toner-Cartridges
@NytiaHenry
5 жыл бұрын
finallyyyyyyyy!!!!!
@anthonyhinojosa2056
4 жыл бұрын
Hello i have a question they make a new version of this printer(m254dw) will the ink cartridge still work for the new version of the printer
@uscuttervideos
4 жыл бұрын
These are laser printers that use toner and not ink. All M254 printers use the same type of HP 202A cartridge. If you are asking if these cartridges will work for the next model the 255, they will not because it uses a different type of cartridge.
@DigiCatBlog
6 жыл бұрын
where can i order white toner?
@bobreichel
4 жыл бұрын
I have a brother color laser printer,. Can I do the same thing with it by getting an empty back cartage and filling it with white toner?
@uscuttervideos
4 жыл бұрын
Unfortunately we only provide Ghost White toner cartridges for HP printers.
@bobreichel
4 жыл бұрын
@@uscuttervideos So, open up more options by doing cartridges for other color laser printers.
@uscuttervideos
4 жыл бұрын
@@bobreichel We are constantly looking at possibilities of adding more models depending on market conditions and which manufacturers provide access to their technology. Unfortunately it is not possible to support every printer model out there since not all manufacturers can support this and also because the printer models keep changing.
@bobreichel
4 жыл бұрын
@@uscuttervideos It's OK you don't have to support every printer out there just mine...lol
@denishshethwala7538
6 жыл бұрын
Can we use it's own company's hp toner? Or do we need all color ghost toner ?
@uscuttervideos
6 жыл бұрын
In this video the HP printer is using standard HP CMY (Cyan/Magenta/Yellow) toners that came with the printer. Only the black (K) cartridge is being swapped out with the Ghost white toner to give you CMYW.
@traceybutler5399
5 жыл бұрын
If i have a hp laserjet pro m452dw what size ghost white toner do i buy
@uscuttervideos
5 жыл бұрын
The product page for the Ghost cartridge that fits in the M452dw is here: www.uscutter.com/Ghost-White-Toner-Cartridge-Comparable-HP-410A
@taowstreetwear
5 жыл бұрын
Hi, can I use white toner on HP Laserjet Pro 400 M401dn ???
@uscuttervideos
5 жыл бұрын
At the time of this posting, the following HP printers are supported: HP Color LaserJet Pro M452dn, M452dw, M452nw, MFP M377dw, MFP M477fdn, MFP M477fdw, MFP M477fnw HP Color LaserJet Pro M252dw, M277, M277c6, M277dw HP LaserJet Pro 100, CP1025 HP TopShot LaserJet Pro M275. HP Color LaserJet CP5225 HP LaserJet Pro M251, M276 It would be impossible to support every printer model that HP manufactures, so a subset was chosen based on printers that best match with Ghost white toner technology.
@knguyen222
4 жыл бұрын
Hi are you able to use that printer with cardstocks? Like 80 lbs?
@uscuttervideos
4 жыл бұрын
That depends on the printer. You will want to look up the specifics of the individual printers to determine that.
@TinyTales66
4 жыл бұрын
Hi mate does hp Laser M454dw works the same like M452dw ? I’m a bit confused
@uscuttervideos
4 жыл бұрын
They are in the same line of printers, but use different types of cartridges. There is currently no white toner cartridge for the M454.
@mcconedamian1
6 жыл бұрын
I'm having an issue please help!!!!! Every time I do the a paper to be paper transfer the image sticks to the b paper can some help me please.
@uscuttervideos
6 жыл бұрын
Suggest you contact USCutter support at 1-425-481-3555 M-F 7:30-11:30am, 12:30-4pm PST or via email at support@uscutter.com as they may be able to assist you with your issue.
@journieshomegarden1280
4 жыл бұрын
Are you still using this same printer? Are there any other low end other models available that will work?
@uscuttervideos
4 жыл бұрын
Here you can see a full list of Ghost cartridges that we carry which should show you which printers you could consider for your needs: www.uscutter.com/Ghost-Toner-Cartridges
@Eambasy
5 жыл бұрын
The one that you using and hp laserjet m252dw are they doing same job
@uscuttervideos
5 жыл бұрын
As long as there is a Ghost White toner cartridge that fits in your HP printer model you should get the same result as in the video. In your case you may want to consider www.uscutter.com/Ghost-White-Toner-Cartridge-Comparable-HP-201A
@jackypeterson5361
3 жыл бұрын
Can this work with the HP M454DW
@uscuttervideos
3 жыл бұрын
At the time of me writing this reply, there are no 3rd party chips for the HP M454
@jackypeterson5361
3 жыл бұрын
@@uscuttervideos thanx for the reply.
@simplyme4313
4 жыл бұрын
Hi is this toner work for my HP LASER M454dw?? Thanks
@uscuttervideos
4 жыл бұрын
The cartridges that we currently offer are listed at this webpage. www.uscutter.com/Ghost-Toner-Cartridges
@thecraftguy21
3 жыл бұрын
Can we do the same with the 454dw ? Thank you 🙏🏼
@uscuttervideos
3 жыл бұрын
Word on the street is that they just finished up the chip for the HP M454 printers. I've had a brand new M454 and M255 just sitting in a box waiting for this so you know we will have it as soon as it is ready!
@thecraftguy21
3 жыл бұрын
@@uscuttervideos thank you 🙏🏼 so for now the best option is this one you are using ? The 452dw ?
@nesto9779
6 жыл бұрын
I want to print in a3 size through ghost toner. What kind of printer should I buy?
@uscuttervideos
6 жыл бұрын
We sell and 11x17 inch printer that should also be able to handle A3 sized paper. www.uscutter.com/HP-CP5225dn-Printer-with-White-Ink
@ucimyy4u
6 жыл бұрын
I was watching thinking I've got to get one of these - then around 6:20 I was like WTF I've got to open the printer and change out the ink cartridge on EVERY print? I don't think so!
@tymiller5357
6 жыл бұрын
I'd much rather do that then spend 3K+ on an OKI printer.
@tinataylor9327
6 жыл бұрын
Depending on your artwork you can print in both white and color in a single pass. If you have rasterized your image in Ps or Ai, then second pass with white under base is recommended
@hollygore4243
6 жыл бұрын
Tina, do you have a link to a video or something how to do this? I just bought this set up and I can figure how to raster it the correct way?
@tinataylor9327
6 жыл бұрын
Hi Holly, here's link to instruction on Forever site I found. www.whitetonertransfer.com/support/downloads-1/#toggle-id-19. I would suggest also taking look at the following vid from David Lewis( kzitem.info/news/bejne/tHh4l6KZo2d2Z6w) he does detailed demos of using the Transfer Rip software offered by Forever as well as UniNet Transfer Rip (company that offers white toner transfer paper and printers similar to Forever). I also watch demos from Conde Sublimation, here's link to Pt. 1 of 2 that I use as reference kzitem.info/news/bejne/2a-GxWduhHh3bGk. I watch these demos to use as reference points of how the process in those TransferRIPs will help me achieve best results in Ps. I've been quite successful with raster results, but still working out how to "choke" the 2nd image needed for white toner print. I've had no problems being able to print color with white toner in single pass.
@meghantaggarwal
6 жыл бұрын
please tell about an A3 printer also and is the toner shown in the video can be used in A3 printer also
@wailbens6947
5 жыл бұрын
Hello can we do this with a tank printer
@uscuttervideos
5 жыл бұрын
This will not work with a tank printer, only select HP printers for which there is a ghost white cartridge. Available cartridges can be seen at the following link: www.uscutter.com/Ghost-Toner-Cartridges
@apprendrelart4805
5 жыл бұрын
Thank you so much for the video! I have a question: What if I just want to print basic white logos on dark garments? My white graphics never have color in them and I'm looking for the best solution to print these onto black garments without using HTV, Plastisol transfers, etc... I am really hoping this is finally the solution!! :) P.S. For printing black graphics onto white garments, I was looking into using inkjet transfer. Then I won't have to cut out the designs because the white will just show up as transparent, right?
@uscuttervideos
5 жыл бұрын
If you only want to print one color (white) onto black garments, then Ghost White toner + Forever Laser Dark paper is a great solution for you. Just design your artwork in black and print the Forever Paper on any HP printer where you have swapped out the black toner cartridge with a Ghost White cartridge. The printer thinks it is printing black, but the results come out as white - it is that simple. You could acquire a separate inkjet printer for black on white, but why not just use the same HP laser printer without swapping out the white cartridge?
@apprendrelart4805
5 жыл бұрын
@@uscuttervideos Thanks!
@staywoke7569
4 жыл бұрын
@@uscuttervideosHello, How is the washability for the paper? Will it peel or crack after a certain amount of washes?
@uscuttervideos
4 жыл бұрын
@@staywoke7569 Properly applied, Forever Dark paper should last 25 washes.
@staywoke7569
4 жыл бұрын
@@uscuttervideos Thank you
@TheSamifaiyaz
3 жыл бұрын
Hey is the M454dw the updated version of this printer???
@uscuttervideos
3 жыл бұрын
Yes, but there is currently no 3rd party chip manufacturer for these printers so there is no white toner for the M454 at the time of me typing this.
@tristanbrito585
5 жыл бұрын
what if you dont have photoshop?
@uscuttervideos
5 жыл бұрын
Users who do not have Photoshop or are looking for a free alternative may want to consider GIMP. You can see a video of how Ghost can be used with GIMP at: kzitem.info/news/bejne/y4ycsIKAp311poI
@priscillap7135
5 жыл бұрын
Can you use Silhouette Studio software with this?
@uscuttervideos
5 жыл бұрын
We have not tried this ourselves, but you should be able to print with Silhouette Studio just like to any other printer. You would have to know enough about Silhouette Studio to create and print a separate white underlay layer which you would resend through the printer after printing your full color layer. Not an ideal solution, but it should in theory be possible.
@randcproductsservicesllc2794
5 жыл бұрын
I havev a problem. Back in October when I was using my white toner cartridge it was working fine. I may have used it about 5 times.. but here it is January everytime I try to use the white toner..I keep getting a memory supply error code. HP told me to contact you guys because they don't support it.
@uscuttervideos
5 жыл бұрын
I assume you have already tested to see that the original black toner cartridge when used in the printer does not issue the same error code. If you have identified that the white toner cartridge is the specific source of the problem, you might want to contact our support teams for further assistance. You can reach them at Sales & Support: 1-425-481-3555 M-F 7:30-11:30am, 12:30-4pm PST or via email at support@uscutter.com
@randcproductsservicesllc2794
5 жыл бұрын
@@uscuttervideos I keep all toner cartridges in the printer at all times. I only swap out the black for white when I have need for it. I contacted USCutter yesterday the tech had me use a q_tip to swab the cricket plate. No joy on that. Have to call back today to see if they will make a exception to give me another cartridge.
@djsigner
5 жыл бұрын
Does white toner have a recharge?
@uscuttervideos
5 жыл бұрын
The only way to "recharge" the white toner cartridge would be to purchase a replacement cartridge. This is the same procedure you would use for any laser toner printer, just that the toner in this case is white. www.uscutter.com/Ghost-Toner-Cartridges
@ranbatooziper1372
6 жыл бұрын
Can you guys confirm if the other color toner (CMYK) is a default toner of this HP laserjet pro ?
@uscuttervideos
6 жыл бұрын
In this video only the black toner is being replaced with Ghost white toner. The other three toner cartridges (Cyan, Magenta, Yellow) are the HP toners that shipped with the printer.
@ranbatooziper1372
6 жыл бұрын
thanks :)
@bespokeplayareas
6 жыл бұрын
What is best though this setup or the Oki?? I'd like to know as I was looking to get the Oki setup you see.
@uscuttervideos
6 жыл бұрын
It comes down to how often you are likely to need white toner. Ghost is a much cheaper solution however it requires more effort on the part of the user. A high volume production house might be willing to pay the higher entry price of an OKI or a UniNet iColor, whereas a smaller operation might want to save the upfront cost and go with the Ghost system.
@bespokeplayareas
6 жыл бұрын
Good answer and fully understood - thanks.
@taloc731
6 жыл бұрын
Is there a particular Photoshop ur using ....i need to get software
@uscuttervideos
6 жыл бұрын
You can use most any version of Photoshop or any other program that allows you to invert a black and white image so that the ares you want to print in white are sent to the printer as black. Since you have swapped out the black toner cartridge in the printer with the ghost white cartridge, the printer thinks it is printing black, but the swapped ghost cartridge outputs white.
@3DPrintRD
6 жыл бұрын
hi if i have that printer i just can buy the white ghost toner?
@uscuttervideos
6 жыл бұрын
Yes!
@mbmusicbizzy8390
3 жыл бұрын
I need help
@dgstudioLLC
5 жыл бұрын
This a great video on how to say money but if you running a business and customers coming in the store this wouldn’t be good to do. It requires to much work for one print. I rather get a oki 8432wt with forever rip software just print and press. Cost about $7500. But will make that back in no time
@uscuttervideos
5 жыл бұрын
Many smaller customers simply purchase a second HP laser printer so that one printer has white toner (CMYW) and the other has black toner (CMYK). Then for situations where they need a white background they pass the paper first through one HP printer and then the second. This makes the workflow much faster and still provides a much cheaper solution.
@dgstudioLLC
5 жыл бұрын
USCutter Videos hey thanks for the fast reply. So that’s a total of $2500 for 2 printers. When you can spend another $700 and get the oki 711wt I got a printer and forever rip for $3700 I’m not hating on what you guys doing it’s a great idea to save money but I look at time and work space
@uscuttervideos
5 жыл бұрын
If you look on the web for HP452nw printer (which can use the same Ghost white cartridge as HP452dw), you can find them for around $250 each which is 5 times less than your calculation above for two printers. The cost equation with Ghost white toner is indeed BY FAR the cheapest in the market hands down.
@dgstudioLLC
5 жыл бұрын
USCutter Videos okay sounds good! I’m going to check the website out and see if they are $250. I’m sure I seen those printers with everything included for $1000. Can any image be printed from this printer?
@dgstudioLLC
5 жыл бұрын
USCutter Videos whats the highest dpi for an image
@simplyme4313
4 жыл бұрын
Where I can buy a printer like that??
@uscuttervideos
4 жыл бұрын
The older models you will have to find a refurbished unit someplace on the internet. We had some but they sold out over the weekend.
@wailbens6947
5 жыл бұрын
Bro ca we do this with an inkjet printer
@uscuttervideos
5 жыл бұрын
The Ghost White toner system is designed to work with laser printers only. Available laser toner cartridges can be seen at: www.uscutter.com/Ghost-Toner-Cartridges
@trucknut04
6 жыл бұрын
I print waterslide decals will this work with that?
@davidminnich828
3 жыл бұрын
What I'm interested in knowing as well.
@dgstudioLLC
5 жыл бұрын
Can you use forever rip software for this printer
@uscuttervideos
5 жыл бұрын
Yes
@ejright2921
5 жыл бұрын
@@uscuttervideos Has this been proven? I was told you can only use OKI printers with FOREVER TransferRIP.
@uscuttervideos
5 жыл бұрын
@@ejright2921 Why would Forever paper want to limit themselves to OKI printers? They want their papers and software to work on the widest range of printers.
@30313995
6 жыл бұрын
hello, for argentina some representate ... or way of making a purchase via ebay...
@ChasFox20
4 жыл бұрын
go to micromark.com
@AngryMrFixit
5 жыл бұрын
where do you buy white sublimation dye?
@uscuttervideos
5 жыл бұрын
There is no such thing as white sublimation dye. You can find available sublimation toners for Uninet laser printers at the following link: www.uscutter.com/Sublimation-Ink
@dahlyah
4 жыл бұрын
Can u use Corel Draw?
@uscuttervideos
4 жыл бұрын
Yes!
@masimniazi
6 жыл бұрын
Hi, Support this paper of this printer and define white toner name. FOREVER self weeding transfer paper FOREVER Multi-Trans.
@ndowneyitakephotos3732
6 жыл бұрын
So you printed this in RGB ? Not CMYK ( you did not set the white area to 100% 0% 0% 0% and it still printed white. Can you go in depth more, thank you. As I do know you can not change to B/W in CMYK mode ;) I am using all the Forever papers laser Dark and Flex soft.
@nicolehicks5904
6 жыл бұрын
Photoshop RGB File Print Settings for Ghost White Toner - Laser Color Jet Pro MFP M477fnw After trial and error a couple of times, this is what worked for me. In Photoshop print setting > Color Management > Color Handling drop down> Change to "Photoshop Manages Color" > Printer Profile drop down > Change to "Black and White" > Under that change next drop down to "Hard Proofing"> Proof Setup drop down > Working CMYK In Print Setting > Printing Shortcuts select "Transparencies" > Select "Print in Grayscale" > Tray 1 > Color Laser Transparency *** Now to the left under "Print shortcuts" selection > Save As "Ghost White - Forever Dark Transparency (Now you have your print setting ready for next time within your printer options.) In Color Settings > Change "Automatic" to "Manual" > Print in Grayscale "On" > Select the "Settings" > Change "Text', "Graphics", and "Photographs" to Black Only > Select "Ok" Now Print!
@tinataylor9327
6 жыл бұрын
Hi Nicole, thanks for those tips. During your trial and error, were you attempting to print "b&w" only or full color w/wht... format, png, psd, pdf, or jpeg?
@nicolehicks5904
6 жыл бұрын
Hey Tina Taylor, I printed full color. The format was my original design as a PSD that I saved as a PNG to print.
@meghantaggarwal
6 жыл бұрын
here are questions 1)when we take out the toners repeatedly won't they just dry off specially in hot and dry conditions of about 100'f 2)if we pre print the A sheets in some no. say about 100 then we change the toner and apply it to the prints will they still be usable or they dry off and the same question with sheet B 3)is the process applicable with A3 printer of the same specifications 4)do we need white toner for single coloured metallic sheets from Forever
@irmaverberne9794
6 жыл бұрын
Nice but i can find it here in the Netherlands the Ghost toner :-(
@nicolehicks5904
6 жыл бұрын
This is where I ordered it from www.ghost-white-toner.com/ghost-white-toner-for-your-printer/?lang=en
@katharinafriedrich3912
6 жыл бұрын
yup, they actually ship to the netherlands for about 12 euros shipping cost :)
@waterdonkey
5 жыл бұрын
Anyone able to get this product shipped to Canada? I'm having no luck.
@ChasFox20
4 жыл бұрын
go to Micromark.com
@Cfeldersproduction007
4 жыл бұрын
All I need is white toner ink for my brother printer 🖨
@uscuttervideos
4 жыл бұрын
Ghost may make it for your machine and offer it on their website. But HP printers are the most commonly sold printers throughout the world, so they are the main focus.
@darrellhawkins9706
3 жыл бұрын
@@uscuttervideos then how do you know which one to choose? I have a Canon LBP622C
@jetbcr
5 жыл бұрын
norteazaon de impresora 452
@photozen8398
6 жыл бұрын
Here is my latest video where I have A sheet of Forever Laser Dark passed ONCE, you can keep the LOVELY GHOST WHITE toner in the printer without the need to remove it nor to wait for the cleaning cycles in between the swaps, NO MORE REGISTRATION ISSUES since it is a SINGLE PASS: kzitem.info/news/bejne/o217qoGhqHuLnXY
@freeboyfreeboy6028
5 жыл бұрын
Are this prints permanent, do they wash away?
@oanamonroe9009
3 жыл бұрын
The prints are NOT permanent. Imagine that they get printed on the top side of the garment, just like a highly adhesive sticker would. They usually last up to 40 to 50 washes, depending on the materials you print them on (such as cotton, polyester, or poly-cotton), then they start cracking and peeling off. Another downside, the prints look a bit cheap in comparison with other printing methods, so expect to have customers complaining. I personally keep my prices low to compensate the quality aspect. However, IF you can't afford a proper DTG printer yet, the ghost white toner might be the way to go!
@user-bb7su7bu4n
5 жыл бұрын
what is the name of that paper??
@uscuttervideos
5 жыл бұрын
The paper used in the video is Forever Laser Dark, which is specially designed for laser printers and allows transfer of white toner onto dark garments and dark surfaces. You can find Forever Laser Dark paper at the following link: www.uscutter.com/Forever-Laser-Dark-Low-Temp
@ibrhiamsomro3059
5 жыл бұрын
Pakistani price
@heidiallen261
4 жыл бұрын
Can this be used on HP M454DW (the ghost white toner)
@uscuttervideos
4 жыл бұрын
The current cartridges we sell are shown here: www.uscutter.com/Ghost-Toner-Cartridges It would be impossible to carry cartridges for every printer out there so only select printers are available.
@Cristiano_Soy
5 жыл бұрын
Do you ship to Ecuador?
@uscuttervideos
5 жыл бұрын
Unfortunately we only ship within the USA.
@Cristiano_Soy
5 жыл бұрын
@@uscuttervideos Here in Ecuador they sell this printer but without the white ink cartridge. Could you buy in the USA only the white ink cartridge and use it as in the video?
@uscuttervideos
5 жыл бұрын
@@Cristiano_Soy We do sell the individual white cartridges, but once again, we only ship within the USA. Sorry we are not able to fill an order to Ecuador.
@Cristiano_Soy
5 жыл бұрын
@@uscuttervideos OK I understand. A friend in the USA would bring them to me. I wanted to know if there would be problems in putting the cartridge as indicated in the video, and the cost in USA of the white ink cartridge. You could send the price to the email: gabrielfernandocastillo@gmail.com
@uscuttervideos
5 жыл бұрын
@@Cristiano_Soy Your friend in the USA can order from our website. Here is the link to the toners page: www.uscutter.com/Ghost-Toner-Cartridges
@ctgr8guy
6 жыл бұрын
When running the artwork through a second time, does any ghosting appear? In the demonstration I saw a white over print ... it seems that the second (white) run doesn't perfectly match the first colour run ... can anyone over some advise?
@tinataylor9327
6 жыл бұрын
Yes. There will be a slight offset on the white print. Manual available on Ghost White Toner website advises to make the design for the second run slightly smaller.
@ctgr8guy
6 жыл бұрын
Hi Tina - yes, we did a second demo doing exactly that and it worked. Just hoping that when you print 10 sheets the offset doesn't increase. One has to make sure your design allows for a smaller "white" 2nd run.
Пікірлер: 256