Congrats to 10.000 subs. The new video shows once again, why you deserve even more.
@misterpatina
3 жыл бұрын
Hey Bro, thanks so much! But I think your Channel definitely deserves more Subs aswell! If you’re reading this, Check out his Channel! 😉
@cringecatto5520
3 жыл бұрын
"as I am not my mechanics, I won't make a new one"🤣 freaking legend
@misterpatina
3 жыл бұрын
Haha, maybe when I got more experience on the lathe 😄
@toongoos87
3 жыл бұрын
@@misterpatina you will.
@gleggett3817
3 жыл бұрын
Though from look of the thread on gun I would expect a hose tail (with 'conical' end) to be fitted rather than a quick release connector but it works.
@frankmurphy5
3 жыл бұрын
I couldn't believe he made a new one of those that time.
@Wraithage79
3 жыл бұрын
"As I am not mymechanics, I will not make a new one" - Perfection! Thanks for the video!
@misterpatina
3 жыл бұрын
You need a brave one, who’s talkin the truth! 😄 Thanks a lot! 🙂
@tnmoe-
3 жыл бұрын
Beauty as always! No roast, just tip, don't wear gloves or rings and especially loose clothing when using the lathe, if your hand or shirt gets caught you're going to have a bad time... Love from Canada!
@misterpatina
3 жыл бұрын
Alright, thanks for the tips! Greets from Germany 🙂✌️
@tnmoe-
3 жыл бұрын
@@misterpatina - Cheers brother, just don't want to see anyone get messed up. I've seen a couple nasty accidents, thankfully no deaths. Oh, and add long hair to the list, put it up in a bun. Pass the message if you have buddies doing the same kind of work. Prost!
@misterpatina
3 жыл бұрын
I definitely understood! Thanks for giving me this positive critic. Hope to hear more of you! Prost! 😄
@niggo7224
3 жыл бұрын
You are right but the gloves are si thin and tight is proboply no problem
@tnmoe-
3 жыл бұрын
@@niggo7224 Yes, but silly error, friend - saying thin 'might be' ok. Yes, but no pain is worth the risk of nicht gloves.
@BB_Chaptsick
3 жыл бұрын
Nice job, sir. I bet done of those little parts were a pain to clean. I laughed at not making a new one, and “I bought a cheap one.” 👍
@misterpatina
3 жыл бұрын
Hey B, yeah it wasn’t easy partwise, but that’s the game 🙂 Im glad you enjoyed!
@garymucher4082
3 жыл бұрын
WOW, how does anyone not clean their paint gun instantly after using it, makes no sense to me... But you brought it back to useable again. Nice project. Thumbs Up!
@nukii.885
3 жыл бұрын
We want to see how you use it in further restorations.
@randomrestoration6858
3 жыл бұрын
Very nice, man! It's weird because I've been wondering a few things lately: First: Who graffitied the side of my house? Second: Why would someone bring an air compressor (and leave it behind seemingly on accident) and graffiti my house with a proper spray gun when they could have just used a can of spray paint? Third: Who in their right mind puts a 1/1 scale sticker of Nicolas Cage's head on their absolutely vile lime green colored air compressor? After seeing this I'm pretty sure I have the answer to all those questions. You can have your air compressor back once I'm done repainting it. Oh, also a huge congratulations to hitting that 10,000 subscriber mile marker! Or I guess it would technically be more fitting if I said kilometer marker. Well now that I've completely confused myself I'll take my leave.
@misterpatina
3 жыл бұрын
Thanks! In my opinion it’s not weird anymore cause with your comment you gave me the answer to all my questions: you, sir, are completely crazy 😄😄😄 Thanks for everything Bro, I really appreciate!!
@randomrestoration6858
3 жыл бұрын
@@misterpatina Haha, you bet! Crazy's the name, commenting's the game 😆
@jamesfield5346
Жыл бұрын
This one is bar none one of my favorites. The reason is your lathe work.
@Xaillery
3 жыл бұрын
Hi Mr. Patina, love your work by the way! I just got into watching restoration videos and have a question. How do you remember the order in how to put it together? I have bad memory and would love to know what you do to keep your process so organized.
@misterpatina
3 жыл бұрын
Haha, good question. I have a bad memory aswell, and I can tell you the secret: Iam filming it. When I don’t know how to put it together, I just watch the footage 😄 And beside the final movie, it’s not always so organized as it seems 😉 Thanks for watching Bro!
@sandrawest4118
3 жыл бұрын
Your restorations show why it's crazy for old tools to be thrown away. Once you get them, they are brought back to life. Well done! Peace 💫
@misterpatina
3 жыл бұрын
Hey Sandra, thanks so much for your kind words! 🙂
@phillipschmitt8167
2 жыл бұрын
Cảm ơn c ạ,hqua vừa nhận được thông báo là tập luôn bayh e đã đánh được r ạ,cảm ơn c nhiềuuuu❤️❤️
@이개구락지
2 жыл бұрын
금손 만능손입니다 정보 잘봣습니다혹시 손타카 수동타가 복원 고장 수리 하는 영상 부탁드립니다
@82gamerprincess31
3 жыл бұрын
This is actually a great way to get a paint sprayer. They are pretty bomb proof. Worst you’ll find is a nagging air leak you can’t track down or some goober left some hardcore enamel in it and clogged up the nozzle. Older guns tend to feel nicer in the hand as they have some weight to them and are just built with higher quality parts.
@jugheadjones5458
2 жыл бұрын
I got one a year ago, took it apart to clean it and lost a packing ring and o ring where the needle goes into the handle. Took forever to find the distributor. I asked for the parts and since it was still under warranty they sent me a new gun. I even admitted it was my fault. So I have 2 identical guns and would still like to fix the one. Just can’t find the parts. But I still bought 2 new ones in a kit and a cheap small one. I’ve got 4 and I really enjoy using them on guitars. They really do a great job and I’m still learning how to use them. I’d like an old one like in the video. Did I hear air leaking when the hose was first attached? Nicely done!
@marchettooo
3 жыл бұрын
If you use water inside de paint gun, it can take it rusted (i think)😅 Anyway nice restoration :)
@Ulle_1410
3 жыл бұрын
🤣👍 bist du auch ein Nostalgiger aus der DDR? Ich hab auch noch ein RG28s von früher und möchte es nicht mehr missen. Schöne Arbeit, mach weiter so. ✌
@misterpatina
3 жыл бұрын
Ich bin zwar nicht aus der DDR - dafür wäre ich wahrscheinlich auch zu jung - aber ich liebe alle möglichen Maschinen/Geräte/Autos/Moppeds aus der DDR! Und so ein altes Rührgerät wäre sicherlich auch interessant für meinen Channel 🙂 Tausend Dank, ich bleib dran! ✌️
@Naplesfrank154
Жыл бұрын
On the sprayer it said “Made in GDP”. Where is that? I looked online and it only give the acronym Gross Domestic Product. Thanks. Great job by the way.
@misterpatina
Жыл бұрын
It’s 'GDR', German Democratic Republic 🙂
@mftmachining
3 жыл бұрын
Good job, gun works well again, Regards
@misterpatina
3 жыл бұрын
Thanks a lot! :-)
@markharrisllb
3 жыл бұрын
Well done, I'm sure this isn’t the last time we see that gun.
@misterpatina
3 жыл бұрын
Haha, on the one side i wanna use it, on the other i dont wanna :D Well see, well see...
@navigatorofnone
3 жыл бұрын
I would never roast anyone using a lathe, i don't even know how to use it. 😅😅
@Multantechinfo
3 жыл бұрын
nice
@misterpatina
3 жыл бұрын
Thanks!
@josimarjunior1419
3 жыл бұрын
Man, pls use the counter point holder on the lathe when u are turning something like this cup. If this thing leaves the chuck the damage can get really serious really fast. Just worried about ur safety, don't get me wrong. Awesome job.
@misterpatina
3 жыл бұрын
Hey man, thanks for that! I’ve gotta mention that I didn’t have a holder at this time, but I was very careful! Now I have one 🙂
@zwan69
2 жыл бұрын
Mit Handschuhe an der Drehmaschine? UVV sagt nein...🤣🤣🤣
@WorkshopDC
3 жыл бұрын
Hey Nice restoration! Perfect finish!
@misterpatina
3 жыл бұрын
Hey Bro, thanks!
@SkylerLinux
2 жыл бұрын
The poor brass nut didn't need to be flattened, just sanded
@jefflevesque4944
2 жыл бұрын
You should remove the needle first before you unscrew the tip. Nice restoration. 🎨
@misterpatina
2 жыл бұрын
Thanks for the hint Jeff!
@der_pinguin44
2 жыл бұрын
Made in GDR reminds me of the joke: "I have a dog, he's an East German Shepherd."
@misterpatina
2 жыл бұрын
🥲
@keithspencersr.6806
3 жыл бұрын
Very nice, some areas you clean like the hang loop, or try to polish the paint container.
@Jimmiburn
3 жыл бұрын
What a little beauty wonderful restoration as always 👌
@misterpatina
3 жыл бұрын
Thanks Jamie 🙂👌
@antonioparra4979
3 жыл бұрын
Excelente maestro!!!!
@misterpatina
3 жыл бұрын
Muchas Gracias! :-)
@theodorebarrettsr.705
3 жыл бұрын
👍👍👍👍👍❤
@misterpatina
3 жыл бұрын
🙂✌️❤️
@eliascruz9757
3 жыл бұрын
Cruz ✝️ let us paint 🎨 the world 🗺
@supremevanlife1872
3 жыл бұрын
Was mich hier begeistert, was wurde mit dieser Pistole alles Lackiert, wie viel Liter Farbe ist da durch gegangen, ach das ist einfach herrlich hier zu zugucken... ist wie NEU das gute Stück ...was sonst, wenn Mister Patina dran war .. !!
@misterpatina
3 жыл бұрын
Hey, dank dir vielmals! Ja, bei jedem Projekt habe ich solche Gedanken. Die meisten sind sicherlich sehr viel älter als ich 😐
@antn260
3 жыл бұрын
Molto bene congratulazioni
@misterpatina
3 жыл бұрын
Grazie mille :-)
@pmfman
3 жыл бұрын
Don't use teflon tape on pipethreads
@StefanDembowski
3 жыл бұрын
Very cool and nice work as usual.
@misterpatina
3 жыл бұрын
Thanks Stefan!
@CoolRestorations
3 жыл бұрын
Amazing you are at 10k already!!!👍🏻👍🏻👍🏻👍🏻
@misterpatina
3 жыл бұрын
Yes sir! 🙂
@Bcarr122391
3 жыл бұрын
You had me at “brush”. 🤣🤣🤣
@misterpatina
3 жыл бұрын
You’re the first one with the same humor 😄😄😄
@Bcarr122391
3 жыл бұрын
@@misterpatina something I would do. Lmao! Great content - keep it up! 😜
@Mechaniclyfe
3 жыл бұрын
Any chance you would want to sell that spraygun??
@misterpatina
3 жыл бұрын
Nope, it’s already in my display 😄 but I got 2 more (mostly similar) , unrestored, sprayguns if you want.
@cangurel6249
2 жыл бұрын
Very good friend. You did a great job. Congratulations.
@misterpatina
2 жыл бұрын
Thanks! :-)
@akhrietuopfusenuo6902
3 жыл бұрын
Nicetiful
@misterpatina
3 жыл бұрын
Thanksiful!
@haydarkamal3643
3 жыл бұрын
Really you working prefect bro ❤️❤️😻
@misterpatina
3 жыл бұрын
Thanks Haydar! ❤️
@howzatrestorations1538
3 жыл бұрын
Very nice, well done and works perfectly!
@misterpatina
3 жыл бұрын
Thanks Bro!
@rseletto
10 ай бұрын
They are fantastic mate 👌
@paulorth2251
3 жыл бұрын
Handy little sprayer for large or small jobs. Nicely done, sir very nicely done indeed.
@misterpatina
3 жыл бұрын
Hey Paul! Thanks for all of your kind comments! You’re a loyal subscriber! 🙂
@wileycoyotesr8623
3 жыл бұрын
Excellent work. Hobbies are a good thing.
@misterpatina
3 жыл бұрын
Thanks Wiley!
@IlNamelessKinglI
3 жыл бұрын
Embrace the MEMES
@jofortinflow
3 жыл бұрын
Impeccable Work.
@misterpatina
3 жыл бұрын
Thanks a lot!
@blackeagle6809
3 жыл бұрын
ne alte DDR Puste...cool, das es sowas noch gibt.
@GPDIY
3 жыл бұрын
Very good job, sir. Well done.
@misterpatina
3 жыл бұрын
Hey GP, thanks!
@GPDIY
3 жыл бұрын
@@misterpatina You are welcome. Keep it up.
@misterpatina
3 жыл бұрын
I will 😉
@restorationfr2098
3 жыл бұрын
NEXT 100000
@misterpatina
3 жыл бұрын
Hey Bro, thanks a lot!
@mattart9083
3 жыл бұрын
Love it.
@misterpatina
3 жыл бұрын
Thanks!
@SebtorDude
3 жыл бұрын
Is the step with the degreaser required? Looks like the gasoline did a pretty good job at degreasing and cleaning.
@misterpatina
3 жыл бұрын
In this particular case i think it wasn’t necessary. I just didn’t know that the gasoline has this much power 😄
@bartman8876
3 жыл бұрын
Oil based paint was used in gun thats why gas worked so well if it would have been a water based gun then it would have need a water based cleaner
@radhaknl
3 жыл бұрын
Mr Patina I like your work style 🙏🏻🌹
@misterpatina
3 жыл бұрын
Radha, thank you so much!
@orrozeta2183
3 жыл бұрын
Il consueto spettacolo di lavoro un straordinario. Bene così!
@misterpatina
3 жыл бұрын
Ciao, grazie per le belle parole :-)
@restorationfr2098
3 жыл бұрын
GOOD JOB
@misterpatina
3 жыл бұрын
Thanks Bro!
@renefanger9085
3 жыл бұрын
Made in GDR 👍🏻👍🏻💪💪 aus dem goldenen Osten 🤪😁💪
@misterpatina
3 жыл бұрын
Da kommen die schönsten Werkzeuge her! I love it! 🙂
@molehogadventures6615
3 жыл бұрын
Great job.
@misterpatina
3 жыл бұрын
Thanks :-)
@joseluisarco9265
2 жыл бұрын
Buen mantenimiento
@bobjoncas2814
3 жыл бұрын
...good one, i think the older guns were better made, not as much plastic and easier to maintain. nice work, stay safe and enjoy..
@misterpatina
3 жыл бұрын
Hey Bob, yeah I think the Same! You too bro!
@evabarnowski-fath6297
3 жыл бұрын
Geiler shit,Bro
@misterpatina
3 жыл бұрын
😄😄😄 danke! ❤️
@leahcimressik5994
3 жыл бұрын
Gute Arbeit 👏 Was hast du für eine tolle Drehbank! Ist die noch aus der DDR ?
@misterpatina
3 жыл бұрын
Danke 🙂 Vom Alter her kommt sie aus ddr Zeiten, ist allerdings, tatsächlich, Made in China. Jedoch hat die Drehbank wirklich eine gute, massive Qualität und Bauweise. Nicht zu vergleichen mit dem heutigen China Kram.
@airedaleterrierhannah9770
3 жыл бұрын
Nice job
@misterpatina
3 жыл бұрын
Thanks Bill!
@ArtisticEndeavors
3 жыл бұрын
Very nice!
@misterpatina
3 жыл бұрын
Thanks Susannah!
@ragegauge7313
3 жыл бұрын
You did an awesome job as usual man. Keep it up!
@misterpatina
3 жыл бұрын
Hey Bro, thanks!
@Innochamp
3 жыл бұрын
Think it‘s from the former GDR because of the TGL - logo ("Technischen Normen, Gütevorschriften").
@misterpatina
3 жыл бұрын
Yes, its from the GDR :-) Thanks for the information with the "TGL", didnt know that before.
@AlfZedler
3 жыл бұрын
@@misterpatina die Pistole kommt vom Kabelwerk Oberspree (KWO) Berlin. TGL heißt Technische Güte und Lieferbedingungen und war die Entsprechung zur Deutschen Industrienorm (DIN) Ist wirklich wieder schön geworden.
@misterpatina
3 жыл бұрын
Hey A to Z, tausend Dank für diese perfekte Erklärung! Finde ich richtig interessant! Danke!
@RedwoodRhiadra
3 жыл бұрын
It literally says "Made in GDR" on the handle...
@jamesfield5346
Жыл бұрын
I have been a fan for quite some time now, and I have never been disappointed. Your sense of humor is great, and by the way, great job for your first time on the lathe.
@ps3WFFAG
3 жыл бұрын
Toller Kanal, super Projekte. Mach so weiter 👍
@misterpatina
3 жыл бұрын
Hey dank Dir! Ich bleib dran! 🙂
@ezequielsilva2709
3 жыл бұрын
Bom trabalho! 👏👏
@misterpatina
3 жыл бұрын
Muito obrigado :-)
@vernabink2865
3 жыл бұрын
Excellent again, of course.
@misterpatina
3 жыл бұрын
Thanks Verna! :-)
@marklawrence1194
3 жыл бұрын
10/10
@fahedq825
3 жыл бұрын
👍👍👍👍👍👍
@misterpatina
3 жыл бұрын
🙂👌
@Boofatcha
3 жыл бұрын
3:10 lol! Mister Strongman.
@misterpatina
3 жыл бұрын
Haha, I just forgot to put on some magnesium powder :D
@robertgrell486
3 жыл бұрын
👍😉
@amilcarmoncada1801
3 жыл бұрын
Restauracion excelente de esta pistola de pintura en aerosol, saludos desde Venezuela.
@misterpatina
3 жыл бұрын
Hola, gracias por las lindas palabras! ¡Saludos desde Alemania!
@amilcarmoncada1801
3 жыл бұрын
@@misterpatina 👍👍
@BennyCFD
3 жыл бұрын
You know very people use the word voila these days..........................
@frog8220
3 жыл бұрын
This is a nice video, your camera angles and audio make it really peaceful and nice to watch!
@timsmith1589
3 жыл бұрын
Nice job bro, looks awesome
@misterpatina
3 жыл бұрын
Hey, thanks!
@timsmith1589
3 жыл бұрын
@@misterpatina your welcome I enjoy the vids bro, where from?
@misterpatina
3 жыл бұрын
Thanks! Iam from Frankfurt/Germany!
@bsheedy7639
3 жыл бұрын
Nicely done.. Looks like the spray gun was 'dancing' towards the end. Great vid to watch before going to sleep. Fan, Down Under. Thanks mate.
@misterpatina
3 жыл бұрын
Hey B! Thanks for your comment mate!
@estes72
3 жыл бұрын
Great as ever! 👍
@misterpatina
3 жыл бұрын
Thanks Alessandro!
@ВадимКузнецов-э5б
3 жыл бұрын
...ну, после сборки необходимо было отрегулировать распылитель!!!
@jamescookad9bu
3 жыл бұрын
Does that say made in GDR?
@misterpatina
3 жыл бұрын
Yup, it’s a GDR product.
@cdteurosport
3 жыл бұрын
I love the lathe work!
@misterpatina
3 жыл бұрын
Thanks Lee!
@brianfong5711
3 жыл бұрын
11:07 I was let down when water shot out instead of paint. Like WTF why so cheap?
@batterymakermarkii2654
3 жыл бұрын
That thing needs a dip in the lacqer thinner...
@AR-tu1fb
3 жыл бұрын
Top als altijd!
@misterpatina
3 жыл бұрын
Hallo Antje, heel erg bedankt :-)
@justinwilsoncustoms6520
3 жыл бұрын
Top job matey!!
@misterpatina
3 жыл бұрын
Thanks mate!
@bsheedy7639
3 жыл бұрын
0:50. Hehehehe.
@misterpatina
3 жыл бұрын
Haha, that cup didnt want to stay still :D
@M_to_the_T
3 жыл бұрын
Made in GDR - like me 😄
@misterpatina
3 жыл бұрын
Haha!
@brakefree6434
3 жыл бұрын
love this ❤️❤️
@misterpatina
3 жыл бұрын
Thanks! 🙂
@JF-mj9vp
3 жыл бұрын
@misterpatina
3 жыл бұрын
🙂❤️
@briankennedy4226
3 жыл бұрын
I've noticed you use a drill press adapter stand- I have wanted to get one to save on buying a drill press; have you had a good experience using yours? And what type do you have?
@misterpatina
3 жыл бұрын
Hey Brian, thanks! Its from my grandpa. I took a look but couldnt find any brand or company :-(
@OberUhu1957
3 жыл бұрын
Konsequenterweise hätte auch "Made in GDR" wiederhergestellt werden müssen!
@minhphuong70vu22
3 жыл бұрын
Good video
@misterpatina
3 жыл бұрын
Thanks! 🙂
@StaticMusic
3 жыл бұрын
This was awesome! Good job
@jaimegomezgarcia7599
3 жыл бұрын
Nice job!
@misterpatina
3 жыл бұрын
Thanks a lot Jaime! 🙂
@marcaogdm
Жыл бұрын
O amassado que ficou no reservatório vc não tentou consertar?
Пікірлер: 206