This video helped me my flywheel had this much play and made that sound I thought my transmission was Done but it was my flywheel change it and it's perfect thanks for sharing
@bishamsingh4023
2 жыл бұрын
Thank you for the comparison. Very interesting.
@martinmeaney340
4 ай бұрын
Shockingly built these things amaze me they last as long as they do
@peterastley-sparke7526
2 жыл бұрын
Always interesting videos :-)
@sudnut
2 жыл бұрын
Good info thanks.
@ccapitanu
2 жыл бұрын
Is the full clutch change video coming :) ?
@BimmerZen
2 жыл бұрын
Unfortunately I did not have the time to do a full video on it. There are also many similar videos on YT already.
@janmachac6394
8 ай бұрын
Should new one have play side to side ?thank you
@frijus100
10 ай бұрын
is still good use old stock new dual mass flywheel?
@7667alessio
Жыл бұрын
Hi, what do you think about the change from dual mass to single mass?
@Nick41622
8 ай бұрын
I wouldn't do it. You risk breaking the crankshaft at idle.
@nvl2691
8 ай бұрын
Not if you switch to a sprung clutch.
@Nick41622
8 ай бұрын
@@nvl2691 Most DMF set ups still have springs in the clutch, so it will make no differences.
@joshchartowich4066
2 ай бұрын
Most solid flywheel kits include a dampened disc. How many cars pre-1995 or so have you driven? Guaranteed all of them had solid flywheels with dampened discs. I've switched to a solid flywheel kit in the good ol' E36 and for a daily driver the difference is very subtle. On the other hand, a lightened flywheel with a solid or "puck"-style disc is going to have extremely harsh engagement and will probably squeak the tires from a dead stop. Obviously, those aren't intended for street applications.
@bachng3453
Жыл бұрын
Hi. I have got these strange rattling sound when depressing the clutch all the way down and goes away when I lift the foot up. Does it sound like flywheel issue to you?
@thanos7360
Жыл бұрын
Yes it is the flywhell it has play I had the same problem and fix it with flywhell replace
@rub23n
22 күн бұрын
it’s actually a bolt from the clutch. Or the pressure plate. But you usually change the flywheel + the clutch kit when you do this job
@emilepapillon2275
4 күн бұрын
so what is your verdict 😅
@BimmerZen
4 күн бұрын
Rotational play was OK, the main concern was the wobble due to central bearing wear. There was noticeable improvement in sound and clutch engagement after replacing the whole assembly (flywheel and clutch). I think the flywheel would still be usable for another ~50.000 km.
Пікірлер: 20