Aqua Shield grease helps prevent rust in a marine environment.
@SALTxTHExWOUND
Жыл бұрын
Great idea with the eye bolts! Do you remember what size they were? I have the same jack plate on my gheenoe and love it 👍🏻
@mgsfishing
Жыл бұрын
Sorry about that but I dont remember. You can take out the little hex head bolt that comes with the jack plate to your hardware store and throw a nut on it there then find the corresponding stainless eye bolt that it will fit on. I'm not good enough to eyeball it lol
@BillaBong1
Жыл бұрын
have you found it? the jack plate is on its way and i also want to do this.
@jaysawyer7867
Жыл бұрын
Those 2 bolts on the side of the jack plate, you didn’t know what they were for are for the mounting brackets for power poles.
@victorheckler2191
Жыл бұрын
Matt. Thanks for the tips on the jackplate. Very helpful. What model Gheenoe is it installed on? Thanks. Vic
@mgsfishing
Жыл бұрын
The 15'4 version. part of me thinks I want the 15'6 classic version for more stability and a wider back but that one is also 100lbs heavier and the weight is a big difference maker for how I use mine
@victorheckler2191
Жыл бұрын
@@mgsfishing Thanks for the info re your Gheenoe. I have a 13' that I currently power with a Torqueedo 1003 and the jackplate would be very helpful in finding the most efficient and useful settings for this combo. In theory, the modest setback of the jackplate should improve top end speed slightly . Have you noticed this effect? Thanks again.
@mgsfishing
Жыл бұрын
@@victorheckler2191 I did not notice a speed difference except for the fact that you can run faster in shallow water because you don't have to trim the motor as far up which keep the back end of the boat from bogging down under power
@salaheldeinabuahmad79
2 ай бұрын
Love the set up! Do you by chance know the bolt hole spacing through the transom? Cant find any dimensions online and my transon akresd has a jack plate, just looking to upgrade to this one haha
@mgsfishing
2 ай бұрын
Hey I don't know but call the number on the on the fly website. The owner is very responsive and great to talk to. Super helpful. I will tell you to attatch it to the transom as high as you can, mount the motor as high as you can and use short shaft motor. It will help you run skinny
@grantandrews1844
Жыл бұрын
Did the hydro foil fin keep your boat from cavitation?😊
@mgsfishing
Жыл бұрын
kzitem.info/news/bejne/wmlvz6aBpICEiH4 here was the results
@darylhuffman7868
5 ай бұрын
what is your engine shaft length, short or standard?
@mgsfishing
4 ай бұрын
Short
@BillaBong1
Жыл бұрын
where can i get me one of those anchor poles?
@mgsfishing
Жыл бұрын
cheapest place I have found! mgs4u.com/shallow-water-anchor-parts-kits/?gclid=Cj0KCQiAgOefBhDgARIsAMhqXA5XY_488PL2IYDcONsMaJqu5_hu24gPqgb3N8A3hp2oOotgsaNzoMMaAoUYEALw_wcB
@BillaBong1
Жыл бұрын
@@mgsfishing thank you!
@alexcruz7719
Жыл бұрын
9.9 to 15hp has no crucial weight difference so you might have made your decision of no going 15hp for an almost non existent reason
@mgsfishing
Жыл бұрын
How many lbs we talkin?
@jayward7536
Жыл бұрын
For 600 it should not rust
@mgsfishing
Жыл бұрын
Yeah I thought the same but its just a trailer type jack they use to raise it up and down. The plates themselves dont rust
Пікірлер: 22