I didn’t realise you had your own channel. Subscribed.
@ACDodd
4 ай бұрын
Yes, and Thankyou!
@Rlee571
5 ай бұрын
Lovely Mk 3 and gorgeous Clubman!
@mk1leg
5 ай бұрын
wow great job on the GT that was a stunning mini
@billywhizz98
5 ай бұрын
3 great video’s especially the clubman
@nickhousden1996
5 ай бұрын
Another great video. Do you ever do any works to MPI engines?
@ACDodd
5 ай бұрын
No as they don’t have carbs on. However I still machine parts for the engines and gearboxes/clutches etc
@nickhousden1996
5 ай бұрын
@@ACDodd Do you have your own web shop? Or do you just sell through third parties
@ACDodd
5 ай бұрын
@@nickhousden1996hehehe far to busy for a webshop I have to turn work away already. Contact me through Facebook messenger.
@MrMkindy
5 ай бұрын
With regards the Cooper S, I've found the twin paper filters in that airbox very restrictive. Slight non cutting mod and K+N filters works wonders for airflow.
@ACDodd
5 ай бұрын
You are correct they are terribly restrictive
@StefanMiniCooper
5 ай бұрын
Again 3 good running Mini's 👍. AC what are YOUR thoughts to put 1.5 forged rockers in my Mini, it's a 1293 with Kent 266 cam and modified head. I read different stories on The Mini Forum.
@ACDodd
5 ай бұрын
1.5 rockers, not on a road car, the cam life expectancy is too short.
@StefanMiniCooper
5 ай бұрын
@@ACDodd thanks!
@deancook2377
5 ай бұрын
Am I correct in that with a CSI electronic unit and a 3.0 Ohm coil that the plug gaps should be 0.025"?
@ACDodd
5 ай бұрын
That is correct
@vijayananda9973
5 ай бұрын
@@ACDodd is that the same for a 123 distributor and 3 Ohm coil?
@MrMkindy
5 ай бұрын
@@vijayananda9973 My Alfa has a 123 and again 3 ohm coil specified, probably can run higher power but more risk of burning it out. Worth checking their website for details.
@ACDodd
5 ай бұрын
@@vijayananda9973 yes
@kathysarmcandy1992
5 ай бұрын
Cooper S first; If I understand the set up, and your needle change, it was rich at idle, even with the jet height(s) set correctly. Hence the needle change initially?
@ACDodd
5 ай бұрын
No, the fueling was to rich across the rev range at part throttle, even when set correctly at idle.
@classic1989mini
5 ай бұрын
Twin carbs? I thought you didn't do them unless supplied by you?
@ACDodd
5 ай бұрын
No, they have to be freshly rebuilt or new. It’s still a risk, that I come out and they are not tunable.
Пікірлер: 24