Finally! I bought it this mount so fast lol Perfect timing too. Seeing that this posted 7 hours ago, I’d say it was meant to be as my motor guide xi3 was delivered an hour ago!
@ScottPrincePhotography
2 жыл бұрын
Installed my mount today. Fit like a glove!
@OneObjective
2 жыл бұрын
Heck yea! Glad to hear that!!
@Konggejian
Жыл бұрын
Where did you get the bow mount?
@Sebbylagana
3 жыл бұрын
love this man. Im gonna pick up one of these mounts for my topwater 120. Looking forward to the full rundown of this boat. Im curious to see how the trolling motor mounts up and functions.
@calebferguson2634
3 жыл бұрын
Would love to see a video with this in action
@JSAVGA
2 жыл бұрын
Does this fit the Old Town Topwater 120? That's the older paddle kayak.
@CrazyCranker
2 жыл бұрын
Can this mount be used with MotorGuide Quick-Release Composite Bracket for Xi Series Trolling Motors?
@chrisfatzer8738
2 жыл бұрын
Just a suggestion for future improvements. For those that do not want to drill into the hull you could make a handle that you can replace the existing handle and then use a bolt to attach it to the handle.
@jedediyahaaronyisrael7118
2 жыл бұрын
The place he drilled the whole has no excising handles.
@CPhillpott
Жыл бұрын
Handle right in front of where he drilled that you should be able to bolt to.
@3brosthatsk8
Ай бұрын
Does it help mount any trolling motor or just motor guide ?
@426273
2 жыл бұрын
Will it fit a top water 106 non pdl
@jamarcigar
6 ай бұрын
Anything for old town 106
@riverpirate1022
Жыл бұрын
Does this mount allow the quick release plate to be mounted at an angle, so the motor head/shaft is not in the way of my pedal drive? That is a requirement for PDL kayaks like the OT 120 PDL if you want to be able to have your PDL as a backup or whatever.
@bounderguy-1089
Жыл бұрын
Needs a modification for the Sportsman PDL 120. If the threaded inserts were mounted 5” forward, the issue would be solved.
@tarataliaferro41
2 жыл бұрын
Hello, can you use this on an old town sportsman 106? I’m new to kayak fishing and I know you have a mount for the back of the boat as well. But I think or feel this way might be better way to go? No tangle up with rods or if I had to use the paddle for some reason? Thanks for sharing✌️
@503SteelKill
3 жыл бұрын
Freaking awesome!
@mtnguyen1696
7 ай бұрын
can i mount minn kota terrova motor on this plate?
@joem4012
3 жыл бұрын
Awesome. How do I get one and are you doing a stern mount for the 120?
@JohnRobertson870
2 жыл бұрын
How does everything feel when you are trailering it down the road? Are you securing the trolling motor down? Love the shit out of this mount, about to purchase one!!!
@OneObjective
2 жыл бұрын
We haul it with the motor on most of the time. If I’m doing a long trip like 6+ hours I will take it off. But honestly you probably don’t need to
@jarrettmcleslie7273
7 ай бұрын
What diameter drill bit??
@manny4491
2 жыл бұрын
Do you think the 120 PDL can handle a front mount trolling motor better than the Native Systems 12.5 Max? Some people on the net are saying the max takes a lot of water in the front when things get choppy with the extra weight of the motor? I am still trying to decide between the yaks! lol
@bounderguy-1089
Жыл бұрын
If you have Sportsman PDL 120 and want to run with both Trolling motor and PDL drive, you will not be able to have them both in the stowed position. Kinda not good for launching or shallow water operation. One Objective could offer a different version?
@joelsweeney9049
2 жыл бұрын
When you install the bow mount on the old town pdl 120 do I just leave the pedals in so I don’t have a big hole in the bottom of the kayak? Do the pedals get in the way ?
@armandogl1990
2 жыл бұрын
Was the video with motet install ever put out? Can’t seem to find it
@victorguerrero9297
2 жыл бұрын
That bow mount can also work for the 10.6 old town?
@barroncunningham73
Жыл бұрын
What trolling motor do you suggest?
@bucknuts8824
2 жыл бұрын
Can you install the motorguide quick release mount over this?
@OneObjective
2 жыл бұрын
Yes it’s made that you have to use a quick release plate
@CrazyCranker
2 жыл бұрын
Will this mount fit the Topwater 120 paddle model?
@jimmydaniels8409
4 ай бұрын
Do you answer emails?
@xuanbinxiao8419
3 жыл бұрын
Does fit to my 106 PDL?
@eddierivera1494
3 жыл бұрын
I have the 106 pdl also……. Does it work?
@hookedbykali
3 жыл бұрын
I have the same question because if so... take my money please! lol
@JDPeezy559
3 жыл бұрын
I've been waiting patiently for an answer since this video was released and still waiting....
@DoubleDigitAngler
3 жыл бұрын
No, I bought it. Doesnt work!
@hookedbykali
3 жыл бұрын
@@DoubleDigitAngler thanks for the response. sorry you had to purchase it to find out
@redfishhunter5619
2 жыл бұрын
Where can a buy one if these mont
@danielcuellar7732
3 жыл бұрын
Can you design a mount for and old town MX?
@benholliday5526
2 жыл бұрын
Does this mount work with a Motor Guide Xi3 trolling motor?
@OneObjective
2 жыл бұрын
Yes you will need a quick release plate
@benholliday5526
2 жыл бұрын
@@OneObjective just ordered. Super excited.
@jean-francoispicard7354
3 жыл бұрын
Model for a sportman pdl 120 salty?
@aledaou85
2 жыл бұрын
Do you have a fixing plate for a sportman pdl 120 (Salty version )?
@williamdotson4090
2 жыл бұрын
Will this work for the non PDL model?
@OneObjective
2 жыл бұрын
No only the PDL right now. But it will soon fit the non PDL
@williamdotson4090
2 жыл бұрын
@@OneObjective Thanks. Do you have an ETA on production?
@benruthlessburger8905
2 жыл бұрын
For those who want this for the 10.6 check out this video for some minor modifications kzitem.info/news/bejne/pquHxXiQspWWe34
Пікірлер: 57