Best instructional video that I've come across for a trussrod jig. Able to hear your instructions and camera work is nice and smooth. Great job, thanks!
@ScheltemaBoutiqueGuitars
10 жыл бұрын
I'm glad its been helpful Eddie.
@wojciechm2428
3 жыл бұрын
These arched router guides are very cleverly invented! Congratulations.
@andrewdoeshair
14 жыл бұрын
This is the most helpful video I've ever seen. I'm getting ready to attempt my first neck build. I just made my first truss rod channel jig yesterday, and already have a list of things I want to change on it after seeing this.
@ScheltemaBoutiqueGuitars
14 жыл бұрын
Hi there, I used Ed Hawley's CAD drawing which is where I got the positioning and raius dimension. It sure helped to make these jigs having Autocad. Bill
@74dartman13
6 жыл бұрын
That jig is priceless!
@SammyBones
10 жыл бұрын
From one guitar tech to another... nice job on the video... and the neck... Have a great day! #jig #guitarluthier
@ScheltemaBoutiqueGuitars
10 жыл бұрын
Sammy, thanks for the thumbs up. You have a good one too man!
@ScheltemaBoutiqueGuitars
14 жыл бұрын
Hi and thanks. I am using a Freud #18-104 1/4-Inch Diameter Round Nose Router Bit with 1/4-Inch Shank
@danielsmith7251
8 жыл бұрын
Thanks for those dimensions, very helpful. Without having access to CAD or large format printers, as a very crude alternative could I (don't laugh) put a pencil on 147" bit of string, peg it the other end and physically draw the curve onto wood for use as a jig? As I say, please don't laugh, very crude I know!
@stevem53
10 жыл бұрын
Nice videos, Bill. I haven't watched them all yet, so maybe the answer to myq question is in the yet-to-be-seen: how do you arrive at the angle for drilling the adjustment screw holes? How do you make those end blocks with that exact measurement? Thanks, Steve
@ScheltemaBoutiqueGuitars
14 жыл бұрын
Hi and thanks, right now I don't have a set of plans for the jig sorry. Bill
@sonictherevenge
12 жыл бұрын
Nice video.. But I think I'll go back to bird houses lol.
@jimjarrel9179
23 күн бұрын
Do you have a KZitem video on how to build that jig?
@ScheltemaBoutiqueGuitars
13 күн бұрын
@jimjarrel9179 Sorry. I don't believe I do. I typically swill print full scale layout of the parts the use them to make templates or the parts.
@patbassman8251
4 жыл бұрын
Metric would of been easier
@ScheltemaBoutiqueGuitars
4 жыл бұрын
Sorry. Im old school.
@darkcruzan
14 жыл бұрын
Nicely done! What bit are you using for the route?
@ScheltemaBoutiqueGuitars
14 жыл бұрын
@MrAtvi61 Sorry but I don't have any drawings for this jig. I use autocad to get the radius and measured out the rest by pencil and rule. I can get you a pdf of the neck drawing and you can use that to print off 1:1 scale. Let me know. Bill
@thesouthsideshovlerleonard13
5 жыл бұрын
Can you make me a jig and purchase? that is very nice. Is the jig made to specifics of the truss rod or will it work for any rod? noticed on several google searches that some trus rods are the same depth thru out length of neck?
@ScheltemaBoutiqueGuitars
5 жыл бұрын
Leonard Bunn some trussrods are dual action so thats why they are the same depth. I don’t have kits sorry
@nathanstockley5563
2 жыл бұрын
Im building a '51 precision bass style neck, im assuming the radius of the channel needs to be a bit larger to maintain the same exit angles given the length of the channel will be longer. my math tells me the difference beween the depth at the ends and depth at the center of your channel is about ~.174" at your radius of 147". should i keep that .174 and extrapolate the radius size given an average exit angle of 2.9 deg?
@husseintech1908
5 жыл бұрын
can you please tell me which router bits I need for the truss-rod line ?
@ScheltemaBoutiqueGuitars
5 жыл бұрын
Hussein Tech I used a 1/4” round tip bit
@husseintech1908
5 жыл бұрын
please we're still waiting for the plan of this trussrod can you please be kind and draw this the make a photo from it please
@ScheltemaBoutiqueGuitars
13 жыл бұрын
@Pelleman666 Could you clarify, what do you want me to send? Bill
@Parcolai
12 жыл бұрын
Would you happen to have Autodesk Inventor and can you real model the jig in the program. I really want this jig.
@LukeBernal
3 жыл бұрын
Hey how deep do you route the truss rod channel? Thanks!
@fenderoid1111
12 жыл бұрын
google guitar scale length
@vincenzogiacalone
13 жыл бұрын
@MrAtvi61 Ciao Vincenzo, potresti condividere con me il pdf che ti ha mandato Bobo9977, vorrei costruire anch'io quest'attrezzo. Grazie!
Пікірлер: 32