For applications where weight is an issue I use "ERATAC Ultralight One-Piece Mounts". They are about 130g or 4.5 oz.
@BRADASSOFFGRIDHOMESTEAD
Жыл бұрын
ALWAYS use a 1 piece pic rail, but I haven't seen where a monolithic scope mount adds any more rigidity than the solid rail itself and 2 rings. The issue is when separate ring bases are used, now your action is the "rigid" part, and it moves!
@chipsterb4946
9 ай бұрын
A 1-piece mount does not guarantee perfect ring alignment. That may be a function of price, because I had a problem with a $135 1-piece mount. Recently, I got a new bolt action rifle and wanted to borrow a scope from an AR. I moved the Warne 1-piece mount over and decided to check the ring alignment just because. To my surprise it was off significantly. I pulled out a Leupold 1-piece mount I hadn’t used yet and its alignment *was* perfect. It also cost $50 less. (Sample size of 1 each so take it for what it’s worth)
@sterlingwilkey2124
Жыл бұрын
Awesome video, yes I know a 416rem mag is no benchrest class rifle but it did shoot sub moa. I had to use a 1 piece base because it would knock the 2 piece bases around. The only rifle that I dont have the 1 peices is my 98k
@bcjdwbiernfjherwfbowfib
4 ай бұрын
You’re voice sounds like the male version of siri
@DadWil
Жыл бұрын
Thank you for this explanation.
@GetMeThere1
Жыл бұрын
Nice example. Thanks.
@jackson4861
2 ай бұрын
For me it’s not about oz ‘s. I need room for my thumb up over the action when carrying in the field , two piece for me every time .
@A5scott
5 ай бұрын
Thanks for the videos! Did you modify that NF Magmount to work with the Kelblys Panda? Thank you!
@dogbone1358
Жыл бұрын
One piece makes a whole lot of sense, but the one piece units I’ve used in the past tend to put the scope higher above the bore than do individual “low” rings. Maybe I’m not looking hard enough for low mounted once piece units? Any suggestions? I’m always on a budget.
@peterconnan5631
Жыл бұрын
Can I add a variable? What would you choose between one-piece Alluminium alloy vs. steel loose rings?
@winninginthewind
Жыл бұрын
Depends on application. weight is not the only concern.
@chipsterb4946
9 ай бұрын
@@winninginthewindis there a difference in lapping steel vs. aluminum? My hunch is that steel is better if you need to lap rings, but it’s only a hunch.
@donbenson5292
Жыл бұрын
The more I can put on the receiver for my factory varmint rifles in one piece is best for me with steel rings. To me a few ounces I dont care.. i just work out harder at the gym..
@davidclark5155
6 ай бұрын
What exactly is scope tube preload? And how would i avoid it if im using two piece system. I do switch scopes from gun to gun frequently and shoot prs style comps
@11mchristo
6 ай бұрын
1-piece if you can deal with a little extra weight.
@markkelly7414
Жыл бұрын
How repeatable are quick detachable mounts for benchrest
@wilfdarr
Жыл бұрын
Not, no matter what Hollyweird will tell you. Any time you take an optic off you will need to re-zero: it's only 3-5 shots, so it's not a big deal, but it needs to be done.
@charleshetrick3152
Жыл бұрын
It’s a quality issue, the mating between your rail and the mount. You can easily pay enough these days to achieve reliability. I use SPUHR QD mounts and my zero doesn’t shift enough for me to notice…at least at 600 yards.
@reeleone
Жыл бұрын
Which type of reticle you have on that Nightforce?
@winninginthewind
Жыл бұрын
All of my comps are DDR-2
@reeleone
Жыл бұрын
Thanks
@longrange1114
Жыл бұрын
The panda F-Class has a non mil spec pic rail . Do you know of a one piece mount that works well in this application?
@winninginthewind
Жыл бұрын
Kelby's specifically state that the rail on the F-Class Panda is for 2 piece rings only. If it were me, I'd just give them a call and ask. They would be the ones that would know if any one-piece mount works.
@yvesboies4530
Жыл бұрын
What rig and application do you use to see your target on your pad?
@charleshetrick3152
Жыл бұрын
…all hail SPUHR!
@winninginthewind
Жыл бұрын
I've never had one of those. Good stuff?
@thepracticalrifleman
Жыл бұрын
@@winninginthewind very good stuff, also very expensive.
@claytonhalford6698
Жыл бұрын
Can you recommend the best single mount?
@charleshetrick3152
Жыл бұрын
@@winninginthewind the price is high, but it’s reflected in the product.
@charleshetrick3152
Жыл бұрын
@@winninginthewind another ridiculously awesome piece of kit, if you’re looking for triggers Huber Concepts makes the best I’ve com across.
@leroybishop2245
Жыл бұрын
👍🙏
@randyemenhiser2573
Жыл бұрын
Half of the time your mouth was moving, there was no sound. I'm not a lip reader.
@justice1327
Жыл бұрын
I had no issues…might be lag in your connection
@wilfdarr
Жыл бұрын
You might have been too early: if KZitem hasn't finished the PFM on their end it can do weird things like that.
Пікірлер: 45