Dr, Green stick Vs putty? Which one is better according to you. In terms of retention
@sandystamilbeats
3 жыл бұрын
Can add.silicone be used in place of c.silicone?
@DrTeethAcademy
3 жыл бұрын
Ofcourse
@arcadia17433
2 жыл бұрын
Hello Dr, i always wanted to know how to take impression using elastomeric impression materials.... With greenstick compound, i know that when the surface is dull, it has recorded the tissues.... how do i check with elastomeric impression material? Also, i had seen some of the putty material inside of tray.... but you got good retention.... please explain how? when i do with greenstick, i cannot get good retention if there is excess material inside the tray? Also if you can detail on how to record the pps area.... how much the tray should be trimmed in that region?
@nandhinisundararaj1177
2 жыл бұрын
She said she is going to trim the excess material in the tray and the next step showed a tray with no excess. Pls check
@arcadia17433
2 жыл бұрын
@@nandhinisundararaj1177 i dont think you understood what i asked. please read my question again. I would like to know how to check if the tissues were recorded using elastomeric impression. Where can I identify in the impression if its deficient ?
@rownakbhattacharjee7046
3 жыл бұрын
Where can we buy this material? What is the mixing instructions?
@multispecialitysince2017
3 жыл бұрын
Which adhesive you used in this ??
@rachelhepsidaisy5653
2 жыл бұрын
Doc. Y cant we use medium body impression material for secondary impression rather than using light body?
@Felix-gc5gx
Жыл бұрын
you can medium is even better
@sazomar4569
3 жыл бұрын
It is just light body?
@panayiotisconstantinou7150
3 жыл бұрын
hey :) lovely video. one question. Why you include the A line ? Best regards
@DrTeethAcademy
3 жыл бұрын
Hey, I didn't understand your question. Please reframe it.
@gaurav30386
3 жыл бұрын
Which adhesive you used for border molding
@mohammadshakeel7150
3 жыл бұрын
Thank you very much ma'am, i had some confusion, you cleared....❤️
@vermasdentalclinic3961
Жыл бұрын
Which adhesive you use before border moulding
@DrTeethAcademy
Жыл бұрын
Its tray adhesive. Dont remember the brand but there are many available like zhermack etc
@drgajendragupta1659
3 жыл бұрын
Lol the man was shaking like the quack....
@anildeshwal6416
2 жыл бұрын
Plz tell me name of tray adhesive
@Zainab-zz5qu
3 жыл бұрын
Yeah need a video on movements during border molding
@tarunnihlani1145
2 жыл бұрын
Very well explained mam
@aloktiwari1981
3 жыл бұрын
Ma'am make video of all the movement during border moulding
@DrTeethAcademy
3 жыл бұрын
Sure
@SilkyRoses333
3 жыл бұрын
@@DrTeethAcademy please do at the earliest Ma'am
@محمودفتحىأحمد-ق9س
2 жыл бұрын
Very good 💓
@juliroyston6512
Жыл бұрын
My custom trays never come back from lab with a wax spacer like this one.
@anujsharma5158
3 жыл бұрын
Thank you 👍❤️
@junaidiqbal1859
3 жыл бұрын
Very good
@sinistar7778
2 жыл бұрын
super
@shrishinde4532
3 жыл бұрын
Why u use latex gloves during putty impression nd second one why u don't make any holes during wash impression 🙄
@DrTeethAcademy
3 жыл бұрын
Latex gloves can be used with C.silicone, it has not shown to retard its setting (unlike A.silicone) and I have made relief holes after removing the spacer. If you watch the video carefully you'll see the material oozing out through the holes while making the wash impression.
Пікірлер: 34