I can't believe the end result. You're an amazing legend.
@Amddetailing
2 жыл бұрын
Tnx bro and enjoy
@DG.gomes89
2 жыл бұрын
Your work is amazing. I'm impressed with the end result
@Amddetailing
2 жыл бұрын
Tnx bro and enjoy
@robbienyc3102
Жыл бұрын
Your videos are great ..,my favorite part is when you throw in “What we do right here is go back!!!!!”......
@Amddetailing
Жыл бұрын
Tnx bro
@valentinizmaylov4697
Жыл бұрын
Great video, I learned a lot from your videos. If it is possible I would like to see more details about the product you use.
@Amddetailing
Жыл бұрын
you have on my channel about Ewocar products
@ceerock8088
2 жыл бұрын
Beautiful
@Amddetailing
2 жыл бұрын
Tnx
@petreticu6008
Жыл бұрын
Great video! Very informative as always. I would love to be able to offer the same results as you, unfortunately i cant, because i dont do this for a living, so i dont have the tools and time to do the perfect job. In my area there arent many customers that would pay for something like that, they barely repair their cars, let alone take care of their paint. I bought a bottle of s20 black one step and a rotary polisher plus all the cleaning and preping materials, will do my best to get decent results for anyone who wants it.
@darrenmetal3338
Жыл бұрын
Keep on practicing and in the end you"ll getting better and better at it👍
@cheveresalvi
Жыл бұрын
S20 blck was originally made to work with a Rotary, I get great results even with my Rotary. The only issue would be finishing down with mininal holograms/buffing trails. My tip would be slow speeds & make sure you have a quality finishing pad.
@zzo28
9 ай бұрын
@@cheveresalvi rupes yellow waffle pad and 500-800max rpm. Must works well.
@mmcarspani1623
2 жыл бұрын
In Uk one step is 30 40£ min per panel🤪😀good job like always 👌😀
@Amddetailing
2 жыл бұрын
Tnx bro
@jelenavisic1953
Жыл бұрын
odličan
@stefan-stocksmadesimple5241
Жыл бұрын
Have you tried using 2 dots of compound, and 2 dots of finish on 1 go..? Good or bad experience with the result..? Any tips?
@Amddetailing
Жыл бұрын
No
@vasiliskaradimos
2 жыл бұрын
Υou are the master!
@Amddetailing
2 жыл бұрын
Tnx my friend and enjoy
@wilfredgomez2632
Жыл бұрын
Hi. Thank you again for your videos. Thanks to you I ordered Ewocar products. I love the heavy cut compound. But let me ask you What about the Ewocar Microfiber pad in this case?
@Amddetailing
Жыл бұрын
in this case, because the coating on the car is not soft, and it is done step by step, microfiber is used because it will do a lot of things and will not leave traces
@icarofaccin80
Жыл бұрын
Great job, i'm from Brazil and i work with detail too, i like very much your vídeos.
@Amddetailing
Жыл бұрын
Tnx my friend and enjoy
@Yama83
Жыл бұрын
How do you get so little haze with a 1 step on a microfiber pad? Cause usually microfiber pad needs a finishing step to reduse the haze
@Amddetailing
Жыл бұрын
as said in the video without pressure
@Yama83
Жыл бұрын
@@Amddetailing okay! Would you recommend 1 step polish with foam or microfiber? On hard paint like mercedez, audi or bmw
@leonfr9137
2 жыл бұрын
Nemas video kako radis dekontaminaciju prije poliranja.
@Amddetailing
2 жыл бұрын
Nemam Prvo vodom saperes auto,onda operes aktivom pjenom onda hemisksa dek.pa rucna(glina) pa opet saperes auto Bice video i o tome najvjerovatnije
@zarkodimitrov8357
2 жыл бұрын
Ti bolje prestani da radiš one step poliranje na takvom nivou, niko više neće ni hteti dvoslojno. 😀 Verujem, da je i one step za mnoge ljude potpuno zadovoljavajući, posebno ako se dobro uradi. Pitanje odnosno tvoje mišljenje oko nanošenje paste na MF disk; vidim, da neki praktikuju da prvo utrljaju pastu u vlakna vrhovima prstiju, pa tek onda stave 4 do 5 kapi paste. Ti ne radiš tako?
@Amddetailing
2 жыл бұрын
To sr tako radi kad je nova spuzva,mf,vuna nebitno poslije nema potrebe za tim jer se samo puni disk pastom znaci samo lad je disk nov to se radi tako
@joaquinmireles3912
11 ай бұрын
3d one is way better
@beripoge7455
Жыл бұрын
Harikasın 🇹🇷
@vekodetailinggarage149
2 жыл бұрын
Bravo majstore, shto mislis spored tebe dali menzerna 2500 bi imala podobar efekt
@Amddetailing
2 жыл бұрын
Hvala probaj bitno je da pogodis kojim sundzeror,mf il vunom sa radis
@damirturkovic9830
2 жыл бұрын
Majstore, hajd' nam napravi jedan edukativni video oko ovih kombinacija diskova i pasti. Kad biraš koji disk sa kojom pastom i zašto?
@HACK.gaming
2 жыл бұрын
Very nice
@dylanharley2605
Жыл бұрын
Did u use the mictofibre cutting pad or finishing pqd ?
@Amddetailing
Жыл бұрын
Finish pad
@zzo28
9 ай бұрын
Its Megs DM'C'5 - microfibre cutting pad 5" ( 140mm ) . Megs finishing mf is DM'F'5.
@d.m1441
2 жыл бұрын
Where can i buy this polish heawy
@Amddetailing
2 жыл бұрын
You have a link in the video description
@DG.gomes89
2 жыл бұрын
Good job brow!
@Amddetailing
2 жыл бұрын
Tnx friend and enjoy
@autoshinemobiledetailing7060
Жыл бұрын
You really waste a lot of time talking useless stuff which most people already know get on with the show.
Пікірлер: 47