Great stuff, exactly what I needed to find. Thank you, subbed!
@Pleasant_Woodworks
Ай бұрын
Thank you!
@ralphalfiehughes
Ай бұрын
Such a good intuitive video thank you.....I,m purchasing 2 of these in the new year but for the time being, I have just bought a dirt cheap Chinese 6090 cnc wood router to learn the processes and programming
@Pleasant_Woodworks
Ай бұрын
The hardest part is learning the software you tend to use. Good luck in your journey.
@ralphalfiehughes
Ай бұрын
@@Pleasant_Woodworks Actually , I own a few engineering companies here in the UK and have been brought up on CNC with all the relevant cad cam programming over the last 30 plus years ...currently with solid works and fusion and vectric V carve pro for the router....but having something of a life change and moving to Tuscany next year to develop a design shop on my property...actually the hardest thing is finding time lol
@Pleasant_Woodworks
Ай бұрын
Oh wow. Yea time is definitely a factor for me too. Balancing full time career, business, and KZitem is still a struggle for me.
@Tek_42
28 күн бұрын
Vincent, I'm liking your vibe! Got my sub, keep it up. I'm a CNC noob as well. 🤘
@Pleasant_Woodworks
28 күн бұрын
I appreciate it Tek.
@gaiustacitus4242
29 күн бұрын
Good video.
@Pleasant_Woodworks
29 күн бұрын
Thank you
@bigdogmn73
29 күн бұрын
Thank you for sharing all your onefinity stuff. I'm dreaming of the day I have your setup. I have the smaller original version, but I want to upgrade to the Elite with the PWNCNC spindle like yours...LOVE your setup!
@Pleasant_Woodworks
29 күн бұрын
Thank you very much for the comment. It has been YEARS in the making.
@j.abella6892
Ай бұрын
Appreciated the walk through, keep it up. I was wondering about your issue with the depth of cut. Was it the material thickness measurement or the z setting?
@Pleasant_Woodworks
Ай бұрын
I’m not 100% sure which part you are talking about but I had two hiccups. When drilling the holes for the clamps, I did a 1/4” bit partial cut then drilled through with an 1/8” bit. I broke my 1/8” bit because there was compacted dust in the hole. The other issue is when I was cutting out the clamps, two of them popped up. I used double sided tape but I think since I didn’t press down hard the tape didn’t hold so they popped up after being cut. Thanks for the comment. Let me know if you have any other questions.
@ElmoTheDestroyer
28 күн бұрын
Good video, thanks... Got my elite being shipped now :) ... Curious, who makes that bracket holding your dust hose to your spindle?
@Pleasant_Woodworks
27 күн бұрын
PWNCNC makes the bracket. Thanks for the compliment.
@patrickdenis8567
Ай бұрын
Good Job !
@Pleasant_Woodworks
Ай бұрын
Thank you sir.
@user_16309
28 күн бұрын
Does adding the tool setter take away some of the Y axis capacity? Is it now only 45.something inches instead of 48"? If so, is there any way to use the tool setter and not lose capacity of the machine? Maybe the side rails are longer than 48"? Thanks. I Enjoy your videos.
@Pleasant_Woodworks
27 күн бұрын
When you purchase their tool setter it ships with two screws to mount it to the table top off of the spoilboard so you don’t lose capacity. I believe most mount it on the front side of the spoilboard.
@prius9253
Ай бұрын
So, where's the link to the tool setter holder?
@Pleasant_Woodworks
Ай бұрын
www.etsy.com/listing/1690760679/ Sorry about that.
Пікірлер: 24