Thank you ! I cleaned my Dyson inside and out! I followed every step. Female 58. I did it. If I can do it anyone can do it. I skipped the unscrewing of screws. Did understand how that endeavor would need cleaning. THANK YOU 🎉 ❤❤❤
@OpenMeUpTec
2 күн бұрын
thanks for your support
@danrichardson4671
3 жыл бұрын
Thanks for posting this! Mine was getting stuffed up, and the “bang it Over the sink” technique wasn’t working anymore. Works great now!
@OpenMeUpTec
3 жыл бұрын
thanks for your support
@yb4671
2 жыл бұрын
😆😆😆 Me too!
@Logan-ov8qs
2 жыл бұрын
7 years I kept this vacuum. I thought I tried everything!! You are amazing. Works so good now! Many thanks.
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@mickey4947
3 ай бұрын
Thanks for the details. My "beater bar" would operate intermittently and I reasoned that I was making a poor contact somewhere. I was able to remove the motor head and buff up the contacts with steel wool. I also made sure to remove any hairs or debris from the area so I would be sure I was making good contact. Working much better now. Your disassembly instructions are superb.
@OpenMeUpTec
3 ай бұрын
thanks for your support
@cashionsikes9320
3 жыл бұрын
Much appreciated mate. You take it to the next level and I for one, am most grateful!Most people are so timid about really doing everything together fullest! You saved me more times than I can count by showing exit and reentry of parts! Thank you 10xs over from the states!
@OpenMeUpTec
3 жыл бұрын
thanks for your support
@MrShawrey
5 ай бұрын
Years I've been bashing mine on the bin now I find out you can detach the motor !! I can finally give it a proper wash
@CharlesKz
3 жыл бұрын
Thanks for this detailed video regarding the dismantling of a DC58/DC59. Very thorough and easy enough to follow.
@OpenMeUpTec
3 жыл бұрын
thanks for your support
@SP-zo5nl
2 жыл бұрын
Thanks for your very detailed video with appropriate commentary. Your demonstration was excellent. I especially like the way you went thought the process of assembling the vacuum cleaner head after dismantling it. May videos just show you how to take the product part and then say , “to assemble, just reverse the process”. I followed your instructions and gave my vacuum a good clean with water and using Chemical Guys Nonsense cleaner using a boars hair brush. It came out like brand new. Your video is much appreciated. Thanks from New Zealand.
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@senisubwalker6911
3 ай бұрын
😊 the but 0:14
@emodanXxX
2 жыл бұрын
my old V6 i haven't used in years was cutting out. Thanks to your video I was able to take it apart and get it up and running again. Looks like some of the channels got gunked up as it was in storage. Now works fine saving me from having to buy a new vacuum.
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@christykimball1140
10 ай бұрын
Me too! Makes me very happy. I especially liked the way you showed how to put the vacuum back together. Thank you very much.
@keithcarpenter6562
2 жыл бұрын
Excellent vid. Very useful. Ours was starting to smell a bit and when I opened it up I was amazed at how much nastiness was inside. Thank you very much.
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@AmazingArnoldVoice
Жыл бұрын
Wanted to say thank you. I have a V6 I was changing the battery on, then I learned about the hepa filter mod, added the Bros filter and motor housing adapter, then I noticed how dirty inside and didn’t see how to disassemble the main chassis and your video was so spot on for both disassemble and reassembly. Can’t say thank you enough! Well done, favorite and best vacuum I’ve ever owned. Also have a v7 I also modded with Hepa filter and longer runtime battery. Next is the Dewalt 20v max battery adapter for hot swap batteries!
@OpenMeUpTec
Жыл бұрын
thanks for your support
@chrissierg
3 жыл бұрын
This is definitively the best video on how to take apart the Dyson vacuum cleaner; so thorough; thank you… :)
@OpenMeUpTec
3 жыл бұрын
thanks for your support
@missyklein9161
2 жыл бұрын
Thank you so much for going through all the steps! I now have the cleanest Dyson in North Carolina LOL
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@PhilMace
9 ай бұрын
Thank you. What a lot of stinky crap that got out. I was amazed that my Dyson worked at all.
@RegCostello
Жыл бұрын
Extremely helpful. I didn't use chopsticks but I managed to squeeze the plastic ring to get the two halves apart using an electrical screwdriver and the point of a big wood drill bit, and used the latter to undo the screws to change the battery.
@OpenMeUpTec
Жыл бұрын
thanks for your support
@taralvkdas4683
2 жыл бұрын
Excellent video. Really appreciate the completeness of the video and the advice on dos and don'ts. I cut a tiny nail and put it in my screwdriver and steel forceps made extraction of the same easily done. Gr8 work. You are a legend.
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@shanemotyl
2 жыл бұрын
I only did the first part and I feel as though we're back to full power... Thank you, this was helpful
@scottlp2323
2 жыл бұрын
Thanks for this. It was a great help. 👍Because Torx screws don't require any downward pressure, I found that if you pull the magnetic bit until it's just a mm or two near the end of the screwdriver and wrap one circumference of insulating tape around it, the bit is easily long enough to remove the 4 screws. Mine came out very easily and my Dyson was caked in dirt and dust. 🙈😁 I was tempted to remove the nozzle from the clear dust cylinder too after seeing one screw and removing it. I tried to pry the sides of the nozzle off and it clicked nicely but it was then that I noticed another screw was inside it. I guessed that the two pin electrical connector would have to come out first to get to it though and I didn't think it was worth maybe breaking it. 🤔 Thanks again for this very useful video. 👍👍👍
@annurch558
Жыл бұрын
Thank you. I was able to dismantle, wash, dry and no more pulsing. The amount of caked dust was amazing
@OpenMeUpTec
Жыл бұрын
thanks for your support
@thereal270
2 жыл бұрын
Awesome video. Watched another year ago and found this to repeat clean but yours did more I appreciate it.
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@sandig621
3 жыл бұрын
Thank you for your detailed vid, I’ve just done this a second time, first time the foam in motor part went into small pieces, had no money at time to fix, so searched many vids, watched hundreds of times from 2 people, then took the ‘it’s now or never’ it was hard, I took pics of every step, that motor head I nearly made a hole in plastic, I love my Dyson so I nearly cried & yes it’s hard to get it back together, I even had to search for similar foam & make gasket, it worked & ive been using for 2 years now, wish your vid was out at the time, your way of taking that funnel part off in one piece from motor head/handle is easier, there is another black gasket in the area where the red gasket is too, for anyone who does a thorough clean. Anyway waiting for parts to dry, thanks again, I was so worried about breaking things, it feels good to know I can do it, this time it was easier cheers🙂
@OpenMeUpTec
3 жыл бұрын
thanks for your support
@carrieriley4931
Жыл бұрын
Thank you so much! My V6 has started to smell when I use it. I’ve cleaned the top filter but had no idea the piece comes out of mesh. Huge clump of hard dirt and other stuff. Thank you again!😁😁✌️✌️
@OpenMeUpTec
Жыл бұрын
thanks for your support
@Stardust_Truth_Seeker
Жыл бұрын
Great in-depth video thank you very much for taking the time to explain it and teach it so well
@OpenMeUpTec
Жыл бұрын
thanks for your support
@andrewwmitchell
3 жыл бұрын
Thank you! Very useful video. I appreciate you making and posting this to help others like me.
@OpenMeUpTec
3 жыл бұрын
thanks for your support
@cch9680
5 ай бұрын
Well, I will.never be doing this, way too complicated for me, but am grateful for this video showing me how to reconnect the motor, the bin & the purple bit, after I dropped the Dyson & it fell.apart! 😂😂
@andrewillemse1970
3 жыл бұрын
Great product and great video. Thank you very much for your time and effort to share.
@OpenMeUpTec
3 жыл бұрын
thanks for your support
@roynexus6
Жыл бұрын
Very helpful disassembly how-to. Thank you for posting this.
@OpenMeUpTec
Жыл бұрын
thanks for your support
@gazzarooosh
9 ай бұрын
Superb video. Clear instructions. Saved me buying a new one. 😅 Thank you very much.
@user-bp5py6bh3g
Жыл бұрын
Thanks heaps dude! Was able to fix my mom's Dyson following your guide :)
@mamaalik12
3 жыл бұрын
Good job. Really nice walk through
@OpenMeUpTec
3 жыл бұрын
thanks for your support
@byfunkyoid2917
2 жыл бұрын
Brilliant. Sorted out my issue using this detailed explanation. Thanks 🙏
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@peterwebster3558
Жыл бұрын
Great video, you’ve answered all my questions. Thanks very much 👍
@kundalini1953
Жыл бұрын
Thank you now my dyson is really cleaned. 👍
@georgie6253
Жыл бұрын
Thank you, great video! Very easy to follow 😊
@kjw2794
2 жыл бұрын
Thanks so much for this video. I’ve used it a couple of times now to clean out my clogged up Dyson. Alles van die beste!!
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@edgarmuller6652
Жыл бұрын
Great detail and explanation. Thank you very much.
@CoVerseAU
2 жыл бұрын
Thank you so much! Extremely helpful!
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@makersmark1974
Жыл бұрын
Brother.. ..the way you move your hands as if you've work on the tables at the casino..😁👍 Finally, an Aussie we clearly understand in explaining.. ..better than some that remind me of Voda complaints dept..🤣
@suziwharton8927
7 ай бұрын
Such a great demo 😊thankyou
@peterbeattie1751
2 жыл бұрын
Well done, easy to follow and a real help today. Cheers!
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@Flyingredcactus
2 жыл бұрын
Thank you for this tuto, it helps me a lot
@philmtx3fr
Жыл бұрын
Very interesting video. Thx for it. On my model I can fortunately extract the back more simply. There is a bayonet to access the filter. But the rest is the same, so again very interesting !!
@grahamcuddy2215
Жыл бұрын
Great description 👍
@davidselems6656
2 жыл бұрын
Fantastic detail. Much appreciated
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@martinbate2
Жыл бұрын
Great vid thank you very well explained and very helpful well done
@gavinlacey4505
9 ай бұрын
Great tear down video helped a lot 👍
@Vimes.
Жыл бұрын
Many thanks for this most detailed video, most appreciated. Our D58 certainly benefits from being cleaner.........it works :) However removing the back of the unit, to expose the motor, is most certainly not easy at all. I have the same tools as shown but it must be about persevering hard with getting that first opening to inset one of those triangular shaped spreaders into the gap. totally failed so far. Apart from checking and cleaning that filter at the back I also wanted to fit a digital battery gauge to the outside connected to the wires inside the unit, the wires would go through the air gaps on the outside of the rear cover. Perhaps one day I'll manage it.............or move on to another project, lol. FWIW any type of filter , thinking of the rear sponge one, should not be so difficult to gain access to.
@terry5957
6 ай бұрын
Very good video! Thank you for sharing! Happy New Years!!
@TanMadScientist
Жыл бұрын
Thank you this has been so helpful.
@OpenMeUpTec
Жыл бұрын
thanks for your support
@patrickroberts8702
4 ай бұрын
Well done, I also resorted to the ‘bang it on the sink’ routine. The little white clips were fiddly and getting that apart was the most difficult part
@annanarborough2432
2 жыл бұрын
Finally able to clean it. Thanks
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@ExtremeShez
Жыл бұрын
Really helpful video. Thanks.
@daryl7745
3 жыл бұрын
Your videos are so good! you deserve more subscribers
@OpenMeUpTec
3 жыл бұрын
thanks for your support
@andrewblackburn6393
2 жыл бұрын
Detailed video. I know exactly what to do now. Thanks!
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@sengwattong1113
Жыл бұрын
Thanks for the info, It help a lot for cleaning. Appreciated.
@OpenMeUpTec
Жыл бұрын
thanks for your support
@nairolfnednilruz
3 жыл бұрын
Wow, excellent, everything said.. thanks!
@OpenMeUpTec
3 жыл бұрын
tanks for your support
@beggerking
3 жыл бұрын
finally someone was able to open up the back prefilter. thank you!
@OpenMeUpTec
3 жыл бұрын
like it says in the video not recommmended
@joeborovina4769
4 ай бұрын
excellent video ,well done ,thank you
@Sairus.
Ай бұрын
Thank you so much for sharing your video its really helpful I truly appreciate it thank you.
@OpenMeUpTec
Ай бұрын
thanks for your support
@jamesbeam5373
5 ай бұрын
Thanks Brother you got me out of a bind.
@OpenMeUpTec
5 ай бұрын
thanks for your support
@giovannilovo7567
Жыл бұрын
much appreciated, you saved me a lot of trouble
@OpenMeUpTec
Жыл бұрын
thank for your support
@kupedsadebedford8095
8 күн бұрын
I was able to clean and get the vacuum apart, except the motor part using the pick.
@suebenjamin6859
2 жыл бұрын
awesome video
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@leokimvideo
Жыл бұрын
It would have been nicer to pull apart a dusty dirty one to show how the dust builds up inside. There is a really easy way to clean these without pulling them apart and it simply involves some fast moving air from a blower. The biggest enemy to these Dysons is if they suck up water. Then that kicks off a world of pain
@OpenMeUpTec
Жыл бұрын
removing a dusty one is extremely difficult to record and show you the parts. i have tried it before and makes it really hard
@dozzio
2 жыл бұрын
Really helpful
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@tranquilitybasehere
Ай бұрын
Excellent help thanks
@OpenMeUpTec
Ай бұрын
thanks for your support
@nissanka007
2 жыл бұрын
thank you, so helpful
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@leokrupp4442
2 жыл бұрын
Thank you👍
@BahjatAlaadel
2 жыл бұрын
71k view and less than 400 likes?! Great video. Thanks a great resource.
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@geraldoxy
2 жыл бұрын
Thank you so much! 🙏🏻
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@Chris-sj5fh
3 жыл бұрын
Does anyone know where to get the foam donut (exhaust filter?) that's inside the back of the power head? Mine disintegrated from age and Dyson support had no clue what I was talking about. Thanks!
@OpenMeUpTec
3 жыл бұрын
it is just normal form. go make your own one from a pillow or something. just to let you know the form doesnt do much or anything so you dont really need it.
@DexterXxX
2 ай бұрын
Useful video. Thanks m8
@OpenMeUpTec
2 ай бұрын
thanks for your support
@Snuzzled
2 жыл бұрын
Me, having owned this vacuum for four years, and not even knowing the basket could come off for cleaning 😅😅😅 Just took it 99 percent apart (didn't do the unscrewing bit because I don't have a screwdriver) but I'm thrilled with how much cleaner it is now and once it's all dry (rinsed the filter and basket with cool water) I'll be putting it back together.
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@marcelovani
Жыл бұрын
Thanks for this tutorial
@OpenMeUpTec
Жыл бұрын
thanks for your support
@marcelovani
Жыл бұрын
@@OpenMeUpTec people pay a lot of money for Dyson stuff, thinking they are paying for quality, but after seeing so many people selling broken Dysons I wanted to open it to understand what is under the hood. IMO it has a very simple design but it’s not better than Shark. One thing I don’t understand in this design is the direction the dust goes and sits on the controller board. Why don’t they protect this?
@user-eu9bk7xq4t
4 ай бұрын
Nice job! I need to remove the mesh. It has trapped bacteria.
@PhilMace
9 ай бұрын
BTW. You don't need an extended screwdriver as the first section comes off to give access.
@stephenpratt689
Жыл бұрын
Very useful. I was wondering how to get that inner screen off. It was caked with dust underneath.
@OpenMeUpTec
Жыл бұрын
can you watch the video and tell me at what time i can see this part.
@stephenpratt689
Жыл бұрын
@@OpenMeUpTec 7:25
@OpenMeUpTec
Жыл бұрын
@@stephenpratt689 i have shown you how to remove it in the video. or is there something i am missing
@lexxxwarhol4330
Жыл бұрын
Thankyou. helpful 👍
@OpenMeUpTec
Жыл бұрын
thanks for your support
@mohamedtauseefshaik3486
9 ай бұрын
thank you
@robertrobey5566
Жыл бұрын
you saved me a lot of money
@OpenMeUpTec
Жыл бұрын
thanks for your support
@mattrichardson4351
2 жыл бұрын
Thanks so much .. I’m gonna take mine apart and clean it because it’s been not 100%
@OpenMeUpTec
2 жыл бұрын
thanks for your support
@debaucheryteapartyvn
Жыл бұрын
Thanks you very much! 🍻🍻🍻 Bravo
@OpenMeUpTec
Жыл бұрын
thanks for your support
@tacklemcclean
2 жыл бұрын
I sucked up a small amount of fine flour dust with my Dyson V8. Now the suction sound is different, like it's semi-choking. And it gets a LOT warmer quickly. The motor itself sounds a bit weird. I've cleaned the filter and all the obvious places to clean out, but I haven't done what's shown in this video. Do you think that could make a difference, or is there likely fine dust in the motor itself and the vacuum being beyond repair? Checked the manual, it says only to suck up "a very small amount of flour", which is kind of arbitrary in a sense.
@OpenMeUpTec
2 жыл бұрын
i have a video on the v8. this is not the v8 and i recommend you to watch the correct video. you can try to open it up and see what happens, thats all i can tell you
@tacklemcclean
2 жыл бұрын
@@OpenMeUpTec cool, I'll check that out, thanks!
@carriesutherland9383
Жыл бұрын
Hello the white chip wont grab the motor to connect back so not sure what to do? its like the white clip is jammed. Can you replace the motor clip so it can join back up. thanks
@OpenMeUpTec
Жыл бұрын
can you watch the video and tell me at what time i can see the white clip
@twistedara
3 ай бұрын
Thank you so, so much!
@OpenMeUpTec
3 ай бұрын
thanks for your support
@reevesjustin
Жыл бұрын
How do you take the nozzle off the bin?
@chuckcts-v3460
2 жыл бұрын
To remove the purple filter that you do first in the video, hold the bottom and twist the top, as you would do to unscrew a beverage/beer bottle, and pull, it will come off w/out prying.
@OpenMeUpTec
2 жыл бұрын
yes and no. the reason for prying is that it will always work and work for everyone. your method is not gurantee to work all the time and depending who the person is. they might not be able to do it
@saadalsaedy2848
8 ай бұрын
thanks
@phil2756
2 ай бұрын
I took it apart down to the main top part and didn't have a bit long enough so I just rinsed it out. Will that mess anything up? lol
@OpenMeUpTec
2 ай бұрын
if it doesnt dry properly it will smell thats probably the worst thing that can happen
@browniescrafts2066
2 жыл бұрын
Great thank you for that Hubby won't break it now. 👍
@OpenMeUpTec
2 жыл бұрын
thanks for your support. it is a man thing to break stuff.
@GirlofNicky
Жыл бұрын
The dust flap fell off when I docked it and I cannot get it back on
@PhilipDrake
Жыл бұрын
Great video mate. Thanks for giving me the confidence to tackle the Dyson deep clean. Could you tell me what brand was your set of torx tools you were working with? Cheers
@OpenMeUpTec
Жыл бұрын
something i got from ebay. i just type in 35 in 1 and got the cheapest
@PhilipDrake
Жыл бұрын
@@OpenMeUpTec Cheers. Thanks for that.
@kirstieb8025
3 жыл бұрын
kool
@Vimes.
Жыл бұрын
Thanks for this, most informative and well detailed. Our DC58, years of working fine. Has now got to the point where it will; seem to fully charge but within seconds of using it show to be flat. Has anyone had experience of using a third party battery..? The originals are kinda expensive. Also does anyone know how to test the original battery we still have, in terms of its ability to hold the charge and what is in it, might help to diagnose it as being faulty..? Thanks
@OpenMeUpTec
Жыл бұрын
it is not faulty the battery is just dead. same things happens to your phone. this is the issue with 3rd party battery they are just dodgy
@Vimes.
Жыл бұрын
@@OpenMeUpTec Thanks. I can't link you but there is a Firstpower 21.6v battery that is well rated, in a test shown in another YT vid. They can be bought from Amazon. The other vid....The best replacement V6 battery for Dyson........
@Nickbaldeagle02
2 жыл бұрын
Instead of long nose pliers, two screwdrivers will release the lugs. You just need an extra pair of hands to hold it still.
@Simon-dp2df
5 ай бұрын
Wach out for replacement batteries mine had no bms😅
@dapas6272
4 ай бұрын
Literally never knew the bin could come off. 10 years later…😢
@kirstieb8025
3 жыл бұрын
why does owners manual show only basic? is this deep clean necessary?
@OpenMeUpTec
3 жыл бұрын
becuase if you have to create a video about it then it is not something a normal person can do. this is not unecessary and dont improve the performance as much. when dyson replace your vacuum parts they replace the whole thing and dont even have the small parts i take apart individual for sale
@faheemakhtar6803
7 ай бұрын
Please help me! My V6 Switch is intermit and after few minitues is stoped. Why?
@OpenMeUpTec
7 ай бұрын
your vacuum is probably blocked. have you clean out the filter
@Cryptony1975
3 жыл бұрын
I'm trying to find a video on how to put spring and few other pieces back in the release lever behind motor body?
@OpenMeUpTec
3 жыл бұрын
sorry it was not a part of the video. are you trying to remove the trigger if so you need to remove the battery and there is a screw in the batttery compartment
@Cryptony1975
3 жыл бұрын
@@OpenMeUpTec I'm trying to put the springs and plastic pieces back in behind red slide. Theres a grey plastic piece with a bar code. Everything is behind that
@Cryptony1975
3 жыл бұрын
@@OpenMeUpTec I wish I can send u a picture of the pieces
@OpenMeUpTec
3 жыл бұрын
@@Cryptony1975 are you having issues with the RED BIN OPEN button? can you watch the video and tell me where in the video you have have problems with
@Cryptony1975
3 жыл бұрын
@@OpenMeUpTec its not in the video. Problem is, behind the bin release button. There's some parts that fell out. A spring. A white plastic piece and a clear plastic piece and a second type of spring. If you can look at yours and send me a pic of where items go I can send u a donation for your help
Пікірлер: 216