Hope you are well Technolli. Sending good vibes your way.
@BrysonPrice
2 жыл бұрын
Technolli! We miss you
@rboutside
2 жыл бұрын
TechNolli where oh where are you?
@DanKing79
2 жыл бұрын
TechNolli!!! We need you! Help us Obi Wan Nolli, we need your wisdom to install Ventura
@madvinegar
2 жыл бұрын
Nice build! The way you left the case fan, it is not pulling in fresh air. It is pushing out hot air. Also, unfortunately, in Monterey the support for Metal Nvidia Cards is dropped. They no longer work our of the box. You need a patcher. Keep up the good work!
@lordkarlos1
2 жыл бұрын
Hello, sorry one question. Have you had troubles with freezed hackintosh? So I have updated my OC and re build it but I saw at some forums other people with other hardware has the same problem, they are working normally and without notice hackintosh stop working and it is randomly
@mjjon8529
2 жыл бұрын
Hi technolli, I need to know when I tried to install monterey on NUC 8 Gen following the installation guide, everything going well after booting until startup window come out, then when I went to disk utility to format m.2 or internal SSD HDD, didn't find any of them at all. the OS didn't access or read them, how can I fix that please, this is very important for me. thanks
@misterkevin_rs4401
2 жыл бұрын
Come back Technolli!
@Maximusprimeatyahoo
Жыл бұрын
TechNolli I hope you'er in good health and life is treating you well, I been waiting for a new tutorial on install Ventura on the Gigabyte Z390 motherboard I hope you can help us out. Take care my friend. Even if you don't make a video you can still say hey everybody I'm busy but doing fine, Just to let us know you'er still alive.
@DanielHipólitoHernando
2 жыл бұрын
Hi Tech Nolli, I have an issue when installing Mac OS in my hackintosh. When the instalation reaches to 12 minutes left it just gets stuck there with the only option of turning of the pc with the case button. It has been a nightmare, any ideas of how to solve it? Thank you.
@reganovich
2 жыл бұрын
In on the ground floor! Thank you so much for your great videos and peace from Ireland! Just wondering why you chose nVidia card for this build; would that mean you can only install High sierra? Also, I was wondering if you intend to do a virtual machine version of these builds? as the EFIs get harder to do, could virtual machines be an option and how good would Logic Pro run on them with GPU/USB/PCI pass through? Thank you Technolli!!
@Mihai-M
2 жыл бұрын
Hello!I have Gigabyte z390 aorus elite did you know if apollo twin x work with GC-Titan Ridge rev.2? Thank you!
@SachinMamtora
Жыл бұрын
Hi, sir I watched all your Videos, and I'm Going to Build one Hackingtosh Machine, I'm little bit confused on NVIDIA 3050 Series or Going to AMD and how to make this card proper work, Please help ?
@zacharyschwanke7160
2 жыл бұрын
so with this is exactly what im looking for. will this board support a 10900K? and can i pair this with a 5700XT?
@Alex4SiliconValley
2 жыл бұрын
Currently What is the Best Value CPU/Motherboard combo for Music and Video editing ?
@rboutside
2 жыл бұрын
Where, oh where, are you tonight? Why did you leave me here all alone? I searched the world over and I thought I'd found true love. But you met another and pthhp! You was gone.
@mrmc9782
2 жыл бұрын
Hello Technolli, I appreciate the hard work! I've subbed. Can you please tell me if you configured the onboard graphics with the EFI folder you are providing on your site? I'm planning to get it but I don't want to use a graphics card. Thanks in advance
@watermelonpinapple8618
2 жыл бұрын
How do I turn a windows 10 laptop in a Mac os running laptop?
@rocnroll0065
2 жыл бұрын
Hey there Technolli. Hope your doing well and are safe and healthy. I'm hoping someone can figure out how to carry on the touch three Alder Lake's little/big core CPU's. I wonder if anyone is studying Rosetta for some backwards coding. I'm still running strong with my z390 maximus xi extreme i9-9900k, but I'm thinking of a AMD x570 Asus Proart Creator with next Vcash CPU's next year....think that's a doable pairing?
@whoisabhay3093
2 жыл бұрын
How to fix intel uhd 630 Cometlake in bigsur using current opencore
@mattposch_official
2 жыл бұрын
amd 5600x / 6600XT Gigabyte/ Gigabyte B550M S2H support hackintosh?
@m.l.9385
Жыл бұрын
Yes, will work - Rx 6600XT is supported since Monterey.
@thomasanderson5929
2 жыл бұрын
Any plans on doing a tutorial for an Alder Lake z690 Hackintosh build?
@orlandotijerina2398
2 жыл бұрын
hello, sir, do you still sell custom EFI folders?
@deepbrarkheewaa
Жыл бұрын
hello, technoli you explain everything very well. if you explain OC gen x every option is for what like CPU chip or another kixts motherboard explains everything so everyone will get help. my board is a dual CPU Xeon e52678-v3 video card is rx580 I need your help my friend pls upload the video for that just create EFI and ssdts everything pls i am sorry about my English.
@georgepitaru
2 жыл бұрын
I have a Dell Optiplex 3070 i3-8100T. Is it possible that I purchase from you an EFI folder that will enable me to install Monterey on it? I don't care about BT or Wireless to work.
@Vaibhavised
2 жыл бұрын
You can follow the opencore guide and do it yourself!
@santiagoferrari1973
Жыл бұрын
Are you ok?
@brownjakkals
2 жыл бұрын
great work , can you help me with the lenovo tiny efi m920q please , keep up the great work
@soulivanhviliyabandith5480
2 жыл бұрын
can make for old cpu like i7 3770 and intel hd400
@bentrillz
2 жыл бұрын
I sent you a message through your website and still no response.
@JoTokutora
2 жыл бұрын
This channel died?
@matthazard
2 жыл бұрын
His site isn't offering services anymore so I'd bet business dried up.With supply chain issues making PC parts expensive and M1 pro Macs most people wanting to build a Hackintosh probably just buy a real Mac.
Пікірлер: 33