Very cool, regarding the under steering at high speed it's likely a combination of a few things based on physics and observation of your model post driving it. Clearly from the wear marks on the tires the rear tires have a larger contact patch with the pavement. This is likely due to a combination of front to rear balance (need more front weight), lack of downforce in the front of the vehicle (increase aerodynamic downforce by adjusting the pitch on the front wing). The suspension and tire material/hardness obviously also play a factor, however, I think the first two are probably the better focal points for starters. Awesome job, just thought I would drop my two cents.
@انا_ابراهيم_البناوي
Жыл бұрын
I'm really impressed by your work I already have the files for the 22 F1 car and have 3D printed a scale model and it's really accurate to the real ones minus the wing mirrors ill try to modify mine to hollow out some parts and make place for the electrical compontes and ill try to share them on printables but yours isn't so bad
@juanmedinar20
2 жыл бұрын
Have you seen HPD F1 RC? It is actually a competition level 3D printed F1 RC car.
@deputyd0ng694
Жыл бұрын
I have this printed, and with the new front chassis plate, the top cover is hitting the servo horn...am i missing something, or did the steering change with the 22 version?
@sergiozabala6081
2 жыл бұрын
Why don't you put screws in the turning ports?
@davecrabbe4579
Жыл бұрын
Assuming not all screw/nut sizes are identical to original OpenRC F1 .. do you have a BOM for metal parts?.. What motor/servo/esc/battery you are using.. same as recommended for original OpenRC F1?.
@InvertedPursuitsLab
Жыл бұрын
I used all the same hardware as on the origional OpenRC F1
@yeungmea4681
2 жыл бұрын
Thank you !
@InvertedPursuitsLab
Жыл бұрын
You're welcome!
@sergiozabala6081
2 жыл бұрын
how can we make the venturi tunnels in the front chassis?
@NOXRTGAMING
2 ай бұрын
Hello, I am new to 3D printing and I wanted to know if with only the 2023-car-model.stp model it is only necessary because I want to send it to be printed by a company online, thank you very much in advance
@sergiozabala6081
2 жыл бұрын
Hi are you going to make updates on the flor difusor and rear wing?
@InvertedPursuitsLab
2 жыл бұрын
At this time that's not something I'm looking at working on, but I may someday. This is an open source project and I know there are already some remixes you can find on Printables and thingiverse, someone may beat me to it.
@jamessullivan2438
2 жыл бұрын
do you have a discord or something? im really into the open rc f1 and have made one go 40-50 mph
@InvertedPursuitsLab
2 жыл бұрын
I'm not sure if Daniel Noree has a server or not. I know he has a Facebook group for the OpenRc project you could look at
@jamessullivan2438
2 жыл бұрын
I was meaning you like a personal one to talk about the open rc f1
@sockeleipzig
2 жыл бұрын
What screws and nuts size do I need to use for assembling the Open RC F1 Car. And how many screws and nuts in total
@Lumakid100
Жыл бұрын
M2s ans M3s.
@r6stu
Жыл бұрын
@inverted pursuits. I'm starting to make this, but the rear chassis plate is only showing as 7mm I'm cura 5. What size should it be please?
@InvertedPursuitsLab
Жыл бұрын
scale by 2540. It's a metric to english conversion error.
@r6stu
Жыл бұрын
@@InvertedPursuitsLab Thank you very much!
@r6stu
Жыл бұрын
Are the 2 halfs glued together or just clip in with no glue?
@InvertedPursuitsLab
Жыл бұрын
I always glue them just to ensure it holds when I get crazy.
@sergiozabala6081
2 жыл бұрын
Haw can i make a difusor
@danceskater
2 жыл бұрын
How do you print the left and right wheel hubs??
@InvertedPursuitsLab
2 жыл бұрын
Very Carefully. I used tons of supports and I can post the print file I used for those as an example.
Пікірлер: 28