This. Is. Genius. You may want to retitle it as "OpenXR for Dummies." I´m new to VR (had an original Quest for about a month, was really impressed but not satisfied, so sold it during the pandemic when I could still get top dollar, now with Quest 3), and have gone absolutely cross-eyed trying to make sense of the other videos I came across about OpenXR. Reading the docs about it made me want to quit VR entirely and take up knitting or something. Your video, especially the first half, was EXACTLY what I had been hoping for! I found your page by stumbling across your livestream from earlier this month. I got thru the first hour of that, thinking how much I was going to enjoy your editing it down to a tutorial, and then found this vid. You laid it out so clearly without bogging down with unnecessary details that are self-explanatory (typical KZitem video spends SO much time on minutia, then completely glosses over the esoteric parts!). I watched the first half once, then downloaded the apps described, made the changes you mentioned, and went right into IL2 Battle of Stalingrad without a glitch. Then I watched the demo part to figure out how to use the Toolbox. That will have to wait till tomorrow because it´s late now, but I am psyched to put this to use. Already in the first pass with OpenXR there was a major improvement in performance -- looking forward to serious tweaking. Thank you so much for such a clear explanation about how to actually get these apps set up and running!
@HamVR
10 ай бұрын
Thank you for the kind message. Glad this video was useful 👍
@ryans4041
Жыл бұрын
Thank you for taking the time to explain what it is doing. People a lot of times tell you but I was always unable to grasp the concept. Now with the visual diagram explaining the processing and the overhead cost I now get what it is doing. Really appreciate you taking the time!
@robblevins6009
Жыл бұрын
You basically need a degree in software engineering to play in VR got it 👍
@HamVR
Жыл бұрын
You don't need any of it, you can run with lower settings instead.
@TheMack
Жыл бұрын
I know what you mean. Balancing all the software, trying to get good performance and visual quality is a challenge. Sure if you only play one or two games, it's doable and requires few compromises. But when you mix SteamVR-games with standalone games and OpenXR games, it gets confusing to know what to focus on. Look at this chain of software to optimize (for HP G2 headset): Windows itself, Mixed Reality Portal, WMR for SteamVR, SteamVR, OpenXR Toolkit, OpenComposite, OpenXR Runtime and Nvidia/AMD driver tweaks. On top of all that you need to optimize the games according to your hardware. It's a troubleshooting nightmare. You also have to know the game engines and their characteristics. Say for example DCS, an old engine, CPU bound, best running on a single CPU core. More modern titles use multi-core CPU and can be GPU bound. My basic rule is to run everything as vanilla as possible, with as few components as possible. Otherwise you risk ending up in a maze that can be hard to get out of. Don't ask how I know :)
@matthewjackson5325
Жыл бұрын
Nah you just need youtube
@hank10111111
Жыл бұрын
It’s not that hard to do.
@Goryglory0209
Жыл бұрын
@@TheMack agreed. Psvr2 to the rescue then
@simonjohnade
Жыл бұрын
You are an absolute legend for doing this !! I cannot wait to go through this. 😉😎 I have tried following the online help with OpenXR tools and OpenComposite and failed. But you have shown a few things I misunderstood. Again Legend!! Many thanks. 👍
@IamLillerz
6 ай бұрын
Having recently bought a Quest 2 and finding that the performance via SteamVR was meh, OpenXR has been a game changer. Thanks so much for taking the time to explain this so clearly.
@jonmac1523
Жыл бұрын
Cheers Ham, your video was just the ticket to get f1 22 working in VR for me, and makes the game look good and playable with your clear instructions. For me with a 3070, keeping it at 72Hz and up the scaling to 115% NIS and med/high graphics, it looks pretty decent. You sir, are a legend :)
@markchurch5273
Жыл бұрын
Thank you for vid mate. Rtx 3060 never seen dirt rally 2.0 run so good. Saved me a few bucks, was going to invest in a 40 series. No need now. Thanks mate.
@HesDeadJim
Жыл бұрын
This is fantastic, thanks so much. I saw openXR in iRacing and had no idea what it was. It didn't work, so went openVR. After seeing this, I installed the toolkit, and am now running in openXR. Even without the performance config changes, it feels smoother and more responsive on my G2 since it's not going through steamVR. Thanks!
@DarkDMD
Жыл бұрын
I posted my performance boosts on Kuno's forum. For my setup, I went from a highly variable 70 to 85fps to a rock solid 90fps including starts. A key was OpenXR plus turning on FFR to wide/performance.
@yayaya1193able
Жыл бұрын
What’s your pc specs
@r200ti
Жыл бұрын
Brilliant, thanks for this. Im running a 4090 and a 4.9ghz 5800x and was really struggling with AMS2 at night and ACC in general (reverb g2, full res). With this Ive got a much better gpu performance across the board and it points me to CPU issues far more reliably than FPSVR does (i.e i still have ACC issues, but its on the cpu side/ai races) Still amazing im having to tweek settings on a 4090 tho to get a constant 90fps.
@Davids6994
Жыл бұрын
That's what happens when you pair a 2k GPU with a
@mrdumbfellow927
Жыл бұрын
@@Davids6994 Yeah but CPUs are so far ahead right now development-wise and aren't gouged on price, just because a couple is less than 200 shouldn't mean it has issues running MOST gaming applications. A 5800x (at 4.9ghz!), having issues running a game sounds more like a threading issue than anything else. Most people needing more power than a 5800x are looking at running a game that is on a single thread and needing 150+ fps for competitive shooters, etc.!
@NEO_RKX
10 ай бұрын
You had issues with a 4090 !?!?
@simracingjunky9679
Жыл бұрын
Thanks for another great video. I got my 4090 last week and I have to say I am impressed. I just wish that they would improve the VR in ACC.
@davidwaVR
Жыл бұрын
I don't know if you messed around with your control panel for your Nvidia card but I would recommend setting one profile for each of the games and turn off any of the control panel features. Make sure they're off or Auto for everything you can also set the graphics to Quality and keep the trilinear optimization on which helps with the FSR or NIS settings for eliminating issues with some artifacting on distant objects. Make sure that if you have any smoothing in the game turn it to zero if you're using VR this will also greatly improve your GPU CPU bottleneck.
@chrisjones3587
Жыл бұрын
Many thanks
@neelakiller
Жыл бұрын
I really wish I'd seen this video when I began using my G2 a month ago. Hell, even yesterday when I finally moved to OpenXR after reading some other things. Nicely done, and I'll be sure to refer others to this vid in the future.
@Popesta
Жыл бұрын
Thankyou so much! i tried all weekend to improve performance with my new reverb G2. I tried over 20 different sollutions. Had all of the suggestions i found online all written down as i was about to rma my headset. My reverb G1 outperformed it and nothing i tried helped. I came across this and thought i'll give it one last try and boom now she performs beautifully! Great work mate Subscribed!
@HamVR
Жыл бұрын
Glad it gave you performance boost you wanted!
@deesee76
5 ай бұрын
thank you for educating me on VR, I got a Meta Quest 3 using cable mode and was wondering why everything outside of the sweet spot are blurry. I just tried running my sim racing games using OpenXR, omg, what a difference. Thank you for teaching me something new.
@Nicklz5555
3 ай бұрын
Why was the outside edges blurry smog you were not using openxr and foveated rendering ? What confuses me is what settings to turn on or off in the driver's. Running amd and quest 3 also.
@deesee76
3 ай бұрын
@@Nicklz5555 i think it’s compression think about how much data is being pushed through to the hmdi2.1 vs what wifi 7 or usb c 3.2
@Nicklz5555
3 ай бұрын
@@deesee76 oh I don't k ow much about using an HDMI cable but my usc c to c link cable has up to 10gbs if speed and works fine on that regard. The only problem I get is lower frames when pushing higher graphics . I've tried the openxr stuff but my image goes awful , I'm obviously doing something wrong
@KiLDELTA
5 ай бұрын
I know this is an old video but THANK YOU SO MUCH! Finally I no longer have stutters and now have stable frames... I am new to Sim racing with VR and this saved me from spending money to buy a new CPU/GPU. This worked with Pico 4 as well using Virtual desktop VDXR
@Mug3n96
4 ай бұрын
im also using the pico 4 with virtual desktop, but i dont have the fixed foveatend rendering option. do you have the settings for ffr?
@GnarAspira
3 ай бұрын
@@Mug3n96 Are u using a NVDIA Card ?
@mbucchia
Жыл бұрын
Wow really really great video with a lot of information and details. Love the split screen comparisons at the end!!
@HamVR
Жыл бұрын
Thanks for the brilliant Toolkit! 😀👍👍
@Cereal_Killr
8 ай бұрын
THANKS from even a year later! Running a 4090 but still wanna get all I can outta it lol. This got me off and running with open XR. Thanks for your time here bud!
@dcarcopo1
Жыл бұрын
😂basically. Thanks for the video. Helped out a lot! Vr and moving sims is about the most complicated nerve racking frustrating thing I’ve ever undertaken.
@jodroboxes
29 күн бұрын
Huge performance boost in IL-2, thank you!
@stevenmilburn5125
Жыл бұрын
Thank you, this has explained so much with clarity, excellent side by side examples, entertaining manner and all round well crafted presentation. Perfect for someone who would like to get the best from what their budget allows. New to your channel now subscribed, brilliant 👍
@toweleeielite
Жыл бұрын
nice one for this mate, just got it working on DCS world with excellent results!! great video :)
@HamVR
Жыл бұрын
Glad it helped!
@hanshix
Жыл бұрын
Very cool, thanks! I'll make sure to check back once my G2 gets here. For now, I'm sticking with the Quest 2.
@hralch1234
Жыл бұрын
Thank you for this video! , I was able to switch from vrperf to OpenXR toolkit to use VRNeckSafe with the Quest2!
@frankwalker3362
6 ай бұрын
Wow, this video is the best guide ever. I honestly got overwhelmed by the many terms and extra programs.
@FLYINhawaiian888
Жыл бұрын
Wow the DLSS in my game was enabled on my game because the other youtubers set up guide didn't explain that part. Thank you my friend, solid and very informative video!!
@cooknn
Жыл бұрын
Thanks, Ham! I just spent an entire evening in ACC getting it to be the best it can be with my new PC (13900K/4090/G2) and I decided it was time to go racing. Now maybe I'll see if I can squeeze a little more out of this setup and possibly increase some settings. Currently I'm at 90fps (average of around 88.2) according to fpsVR. Would love to get that average up, but don't want to sacrifice. Maybe this will do the trick.
@HamVR
Жыл бұрын
😎 Foveated rendering should take you to fixed 90fps if you are almost there already with your current settings. Also CAS will really sharpen the image up too.
@dubtube6691
Жыл бұрын
Great game when you need a 13900k and a 4090 😂🤦😂😂😂
@cooknn
Жыл бұрын
@@dubtube6691 Right?! I think it's more a UE4 thing. But, with this setup it is amazing.
@CTACXPULSE
Жыл бұрын
2 days ago did upgrade of cpu/mb/ram to get 90fps on my hp reverb g2 in f1 22, and finally with i7-13700 z690 and 6400c30 32gb I hit 90fps with ultra high settings. Tried acc fps great, but for some reason colors looks like hdr, very red’ish. Can’t quite understand why color changed. Will test openxdr tomorrow
@callsignbh
Жыл бұрын
@@HamVRhow much CAS are you running? Around 70%? And do you use Advanced Sharpen in ACC still?
@tonyyimbo
Жыл бұрын
This helped me so much .my pc is feeling its age a bit now and those was a huge boost thank you!
@WillyBootleg
Жыл бұрын
This is a great instructional, very much appreciated. I've seen another similar instance of an altered dll and config file that attempts to utilize FSR or CAS for VR and some non-VR games as well, but it's much more difficult to configure since any edits must be done in the config file with the game closed. Either way, Open Composite and the OpenXR toolkit are far better developed tools for doing this and I'm glad I found this video. Thanks for your hard work!
@guvnormclean
Жыл бұрын
Just bought a 7900xt and the current drivers are pants in steam vr. Was pesamistic about this software. But holy cow this literally made acc smooth as butter even with no upscaling. Thanks @hamvr . Game changing i am now racing in 4k. Legend .
@siekoch
Жыл бұрын
Thank You. You are my master! This is the best what we can have for PCVR. Here is my short story about what can do good developers and software over great hardware specification. Hope this help for newbies. I bought Pico 4 and i'm very disapointed. I'm using Quest 2 from one month for PCVR with USB3 cable (ACC, DR2, etc.). I spent a lot of time to find out the best configuration (FPS and Quality) and luckily i found this video! 🙂. Now a lot of YT and internet hype for Pico 4 with Virtual Desktop (aka game changer and so on..) It's a bullshit for me. I've bought Pico 4 few days ago for better FOV, resolution and overall "image quality". Tested everything (WiFi6, USB-C etehernet card, USB3 cable, Streaming Assistant and Virtual Desktop (Godlike on my RTX 4090). Sorry, there is no way to have even close what i have on Quest 2 with OpenXR Toolkit and Open Composite with USB3 cable (I mean FPS and overall image quality not FOV of course). Now I will return my Pico 4, stay with Quest 2 and in the time where I wait for Quest 3 I will try HP Reverb G2 V2 because have also better spec then Q2 but can work same straight way like Q2 (OXRT, OC) without this sh**ty heavy SteamVR which Pico 4 use. Try your configuratiion with Virtual Desktop instead Streaming Assistant and You will see much better quality and performance, yes it's true. But again, for me even VD it's not to close what i've got from OXRT and OC. I wanted to have the same quality and performance on Pico 4, and even better due to the spec, but it's not possible until Pico 4 will not fully natively supports/uses Open XR.
@HamVR
Жыл бұрын
Thanks for your comment and thanks tip! Glad OpenXR Toolkit helped you out.
@TheSpaseDestroyeR
Жыл бұрын
Pico 4 now offers full OpenXR support, does this change something?
@WilXuH
8 ай бұрын
TLDR: I used openxr with quest 3 to tackle performance issues in an outdated machine, and found performance, but had to stick with oculus software for better smoothness I see that your video became quite a reference to sim racers - which is not surprising since your content is great :D - so I'd thought I'd live my 2 cents in the comments for anyone who may be making their research: My pc at this point is somehwat outdated (i9-9900k - 3.6ghz overclocked at 4.5hz -, 32gb ddr4 3200mhz ram, geforce 2080 super), and even with the rift S it ~struggles~. Thus, I wasn't planning on upgrading the headset, but the Quest 3 was just too good of a value for money not to try. After playing around a lot with openxr I found improvements with foveated rendering/upscaling, turbo mode as well, but sadly my machine just can't keep up; even with good and stable framerates I couldn't get rid of stuttering. Even with unusable low settings and tons of headroom there was noticeable stutter ;( So sticking with the oculus software for iracing and ACC was the only solution; with the link cable, it runs in similar settings to the rift s (although at 72hz), and even with the increased latency (around 50ms) it's as smooth as the rift s - and obviously it looks miles better. I'm really surprised with how well link cable performs; it's a bit of a bummer that no true comparable PCVR headset is available at a closer price point, but Zuck got me checkmated there. Probably with a slightly better cpu/gpu I could have kept the gains made with openxr in sim racing, and the stutter shouldn't noticeable in slower games :D
@tobytoxd
Жыл бұрын
Thank you much for all that explanation in detail!
@HamVR
Жыл бұрын
Glad it was helpful!
@AlessandroDiCandia
8 ай бұрын
Hi, i can't use opencomposite. Everytime tryng to launch him, gibe ma a error. Or don't donwload the dll file's or don't switch in opencomposite mode
@pboprebru5979
7 ай бұрын
Me too
@FOne_Fan
Жыл бұрын
Great video and very helpful!! Going to get this setup for iRacing!
@Goryglory0209
Жыл бұрын
Thank You HamVR. This will help me a lot being a noob on VR
@jaysway007
Жыл бұрын
💯Great Breakdown Video😁 Thank You Sirrrrr🥳
@phenrysmueller3597
Жыл бұрын
The 4090 was a good upgrade for vr gamer but this tool is a HUGH STEP FORWARD ! specialy in ACC. Now i play WITHOUT DLSS +KTAA + most settings on EPIC (vegetaion and postprocessing [depth of field / motion blur] are on LOW), have a much clearer view in the G2 and stable 90 fps. The new, better mirror view is a massiv immersion plus. That forward circle and upscaling stuff is not necessary. ACC and XRtoolkit run`s smooth without that options on a i9 12900k / 32 GB DDR5 and the 4090! My appGPU "score" is most 6,1 ms. CPU bound is 0.5 IF it`s showing. VRAM use is most 11 GB. Thank u a lot HAM !!!
@schmagoogly
Жыл бұрын
Hey thanks a lot for this info!!! This has been immensely helpful as I have just created a new PC gaming build equipped with an RTX 4090. Building a PC is easy compared to setting up VR and getting VR optimizations dialed in, ugh! Thanks again for this great tutorial!
@HamVR
Жыл бұрын
Glad it helped!
@VolksDragon
5 ай бұрын
Apprecaiate this video, iRacing is running much better for me now with OpenXR versus Oculus mode!
@Chitown388
10 ай бұрын
Thank you very much for the video! This is immensely helpful!
@sunhuaren1988
Жыл бұрын
I was running acc with 11400f and was cpu bottlenecked, I thought "fair enough, 11400f is outdated", so I update to 13700kf, still the same. Then I found this video, I am relieved 😌
@mario_nuevo
Жыл бұрын
In my case, I deactivated built-in iRacing sharpening. Then I used OXRT CAS instead, and at 80% I get a very crisp image on my G2. Also, I use FFR on quality and narrow, and Turbo mode is a game changer for me. It looks like Turbo mode makes the CPU less bottlenecking. No crashes on iRacing with it. I can't say the same on FS2020. Turbo cause CTD all the time.
@mchl_mchl
Жыл бұрын
Yeah I don't really understand CAS, is the % value the upscale value or the sharpening value? The OXRTK CAS is different than the OVRTK CAS where it has an upscale value, AND a sharpening value (that i usually set to 70%) .... for example if I set the OXRTK CAS value to say 70%... is it upscaling anything? or just sharpening 70%?
@GlennCorbet
Жыл бұрын
Can you share your PC specs and iRacing graphics settings please?
@cladecq
Жыл бұрын
We often use the term "game changer" wrongly. But going from steamVR to OpenXR is more than a game changer, it's downright another world. On Assetto Corsa, GPU performance more than doubles, latency becomes tiny (constant 6ms compared to 17 to 19ms before), which not only allows the graphics to really be pushed to the maximum (with real shadows in 2048*2048 for example) but also to have MUCH more cars (AI) in a race, without ever saturating the graphics card (if it is still powerful at the base), all with 90 FPS constant without the slightest drop. With my 12700KF / 4070Ti / 32GB DDR5 5200 / NVMe 2.0 SSD, after setting the CAS to 70% (and with the magic "turbo" button), I never exceed 80% GPU occupancy, 6ms total latency (CPU + GPU, not just one or the other but both added together!). The new problem becomes the capacity of the CPU to handle all this, when we put more than 30 or 40 cars on it. Although I am still doing very well on Battenbergring with 47 opponents! And it's absolutely magnificent in my HP G2 which is finally used to its true value. OpenXR with Open composite is a real revolution for those who until now used that awful SteamVR.
@HamVR
Жыл бұрын
Thanks for your detailed comment 👍
@awsoren
8 ай бұрын
I'm getting crashes in ACC every time I exit a race when I use Open Composite. Any idea why?
@cladecq
8 ай бұрын
@@awsoren I have some occasional crash also, when exciting AC, but only in rare circumstances that I have never been able to identify. I have no problem with this on AC, since there is only a summary of what I have already seen before leaving the finished race. And that poses no problem on replay. But I have no explanation for ACC, a game that I bought when it came out and on which I only have 14.6 hours of play (steam tells me), last time was several years ago. Compared to 1700h on Assetto Corsa...
@MrNeilRoberts
Жыл бұрын
Perfect explanation - thank you so much ! 😀👍
@mikes5977
Жыл бұрын
Very helpful thank you for putting this together!
@jcaashby3
9 ай бұрын
Solid video. Was able to follow it and it worked on the first try. First game I played was Dirt Rally 2. I did have the game running OK via Steam VR but bypassing it and using the tools enabled me to get it to run better and actually see what the changes were doing as far as the CPU and GPU in real time.
@barzucci
6 ай бұрын
What i did actually with ODT; i take horizontal fov to 0.9 and vertical one to 0.4. 0.4 here create a black box from top and down and it seems you wear helmet and more realistic for me. And i can run all racing sims now %50 more with resolution and clarity is great with Quest 3 in 90 Hz. With my 4090 card in 90Hz 1.5 multiplier in Oculus app, 2 pixel per eye in ODT can't explain how beautiful is.
@Eutolicos
Жыл бұрын
found opencomposite because of ACC and switched from FSR_mod. But I mostly play il 2 Sturmovik in VR. IL2 would be really something but I would like to see a benchmark from you with your 4090 and the G2. I'm very happy with how my 3080 fires up my G2, especially with OpenXr 1.2.1, but the VR community of IL2 would be interested in a video about it with the 4090. Your tests are really good.
@HamVR
Жыл бұрын
Thanks for you comment. IL2 is one of the videos on the list I'll be checking out soon 👍
@Eutolicos
Жыл бұрын
@@HamVR Thx! As a small tip... just select a basic model if you don't already own it to test it. It's best to wait until the next Steam Sale. This should be the autumn sale in 2 weeks. 22.Nov. or so...
@HamVR
Жыл бұрын
@@Eutolicos I already have it but thank you. I must have bought it a long time ago.
@Eutolicos
Жыл бұрын
@@HamVR Oh good! There's a real science to IL2 when it comes to VR settings... the old engine is probably to blame for that too, unfortunately. The VR IL2 community has their own tips and tricks that they have created. But as I said, your tests are pretty good. If it needs settings that (some ;) ) use in IL2 I can gladly give an outline.
@wattouk
Жыл бұрын
Nice guide. Thanks Ham.
@Crimson_201
Жыл бұрын
we need more people like you in the VR community explaining how to configure games and headsets because most of what ive seen was either misleading or outdated also ACC is very poorly optimized game.. using UE4 for the game was a horrible idea
@st1ll_human
7 ай бұрын
EPIC video man... excellent information that is easy to follow. You've got a new subscriber buddy. A+++
@stryker1997
Жыл бұрын
great tips, didint know about this software, thanks a lot 👍
@keeblar209
Жыл бұрын
Amazing video bro 🎉
@whereta3097
Жыл бұрын
Ams2 runs great between low medium high so getting more frames will be awesome, but the real culprit F1 22 just doesn't really work well, will try this out tomorrow and update with my results.
@HamVR
Жыл бұрын
AMS2 in general runs very well in VR. The scenario that kills FPS though is having lots of cars behind you that have their lights on e.g. at night or in the wet
@HypHipHop
Жыл бұрын
Good video and very useful info. 2080 OC MSI + Samsung odissey 1-st gen , 8700k , 32 gb ram... and with this tool Dcs World works fine. Turbo option is a game changer ,at least for me in. This software is a must have if you are a vr user. Thanks again HamVR
@TJRSIM
Жыл бұрын
Great explanation on how to use this. Thank you! :)
@Alfish83
Жыл бұрын
Well delivered guide mate. Thank you.
@JOE.DANCEN
Жыл бұрын
Great video. Next time set the time the menu disappear to off first. Makes the video much better to follow. Thanks for your time and keep these vids coming
@zen5741
Жыл бұрын
Thanks for sharing this! Very useful :)
@hernanialves6938
Жыл бұрын
I've used opencomposite for OpenXR and in fact you gain some fps, but you can also notice that the image quality is worst and with some additional artifacts. Even when you shake you head, you can see that the image warps a bit. An example is when you look at a vertical pole, it deforms when you move your head. I have a G2 and tried this on ACC. Turned back to OpenVR.
@stryker1997
Жыл бұрын
thanks for this info
@Rationalific
Жыл бұрын
This is extremely helpful! Thank you!
@myweirdtaste8090
Жыл бұрын
Very good guide and tutorial!
@pastuh
9 ай бұрын
Restart session means enable and disable VR. In MFS its ctrl+tab
@Rikus1978
Жыл бұрын
OpenXR works with pico 3 or pico 4?
@ji3200
Жыл бұрын
Thank you so much for this video. Nobody tell me exactly how to do it step by step so i never use it. If you have time, can you make a video how to use AMD FSR 2.0 mod. Thanks brother
@Chupi0486
Жыл бұрын
Thank you for the great information! What are your settings in the OpenXR-Tool for WMR? Is there a best practice here? How should the ingame resolution be? I turned on the "Fix resolution auto" option in AC, is that correct or do I have to enter it manually?
@juliol.7081
7 ай бұрын
Thanks for your video. Iam poor person and have just an Lenovo WMR and it fix a lot for me. 🤝👍
@jesusthesecond
Жыл бұрын
Has the Open Composite changed since you posted this? I download the files from the git link but there's no exe in there!
@lulufolds
Жыл бұрын
Does this work with virtual desktop?
@Bruh-rn6rh
8 ай бұрын
Helpful vid thanks 🙏
@RfrSSWolf
Жыл бұрын
It Can Be Used IL2 Sturmovik Bodenplatte?
@stevedoetsch
Жыл бұрын
The jump at 8:28 into the game doesn't explain how to open the game or even open the menu he's showing. I normally open my games via steam VR so if I'm not going to open steam VR then how can I open the game in VR? Even when I go to steam and click play the game auto-opens steam VR, of course, because that's the only way it will run.
@HamVR
Жыл бұрын
OpenComposite “pretends” to be SteamVR. Go to your Steam Library and run the game in Steam VR mode 8:25 See the doc here also mbucchia.github.io/OpenXR-Toolkit/opencomposite.html#tips-for-using-opencomposite
@JamesHartnell
11 күн бұрын
Very odd - Have the latest version and there's no option for the Fixed Foveated Rendering - why is it that it's always the one thing you want and the tab/option isn't on your version - always, always, always...
@TMMRacingTeam_91
Ай бұрын
Thanks a lot!🙏
@Norse1957
Жыл бұрын
Thank you for this video. I found this video while looking for a solution to the VR stutter (when moving your head only) in F1 22 that so many of us are having issues with... So one question for you, before I go to the extra time of trying the toolkit, is this something that may address that stuttering problem?
@HamVR
Жыл бұрын
I never really had the head turn stutter myself so I don't know. I think those that have found that using OpenXR improved things, but didn't fix it.
@JamesHartnell
14 күн бұрын
@HamVR - excellent guide, but I have one really dumb question as I can't see you specifically do it - With the Quest 3, when you go to open ACC in Steam you have 3 options. 1. Play ACC (normal). 2: Open in SteamVR. 3:Open in OculusVR - can I assume that with Open Composite open and set and OpenXR Toolkit ready you use the SteamVR option?
@HamVR
14 күн бұрын
Yes use the SteamVR option.
@JamesHartnell
14 күн бұрын
@@HamVR Brilliant, thanks for the prompt reply.
@sunny113866
Жыл бұрын
Top vid! Thanks!
@denisnovacek8428
5 ай бұрын
When I open OpenXR, there is not a single game listed I can use it for eventhoug I have assetto and many more games
@user-nx8ov2vl2s
Жыл бұрын
It's very interesting. Performance is still lacking on my PC.
@NessPaMC
9 ай бұрын
Bravuh, wait I need prepare some tea.
@easybreeze1
Жыл бұрын
Thanks for taking the time to make this, didn't really understand what this was... the main thing is how much better it is than using steam vr / oculus software? My assumption is that unless you use foveated rendering there is no performance increase? The in game dlss or fsr I would assume match the open xr toolkit scaling or am I reading it wrong? I just keep seeing titles stating free fps increase but I am wondering if open xr toolkit is simply a way to get more fps by using foveated rendering?
@HamVR
Жыл бұрын
If you are none WMR user then yes the main performance benefit is foveated rendering, which depending on the game offers quite a large performance boost alone (see the gpu frame times at the demo section of this video). Some games don't have FSR or DLSS so that's another bonus. Also Contrast Adaptive Sharpening has been added to v1.2.1 which is another nice feature not all games have.
@easybreeze1
Жыл бұрын
@@HamVR thanks. I have a quest 2 and only play acc so I guess I'm lucky. Can't wait to give this a shot as my 3070 is struggling once the resolution is increased.
@mh7711
Ай бұрын
@@HamVR So moving from G2 to Pimax Crystal light without WMR would be a good boost in AMS2 when using OpenXR even without using uscaling with NIS etc? because with HP G2 I dont see any boost comparing SteamVR and OpenXR (without upscaling).
@antonioduboygalaz3840
Жыл бұрын
Hello, Thank you for this excellent video! I use OpenXR toolkit with Quest -2 and flight simulator, which has also an in -game render resolution. For better performance, should I set a low in-game resolution (70% for example) and a high FSR resolution (100%) or the opposite? Thank you very much for your help!
@Alfish83
Жыл бұрын
How did you go with your tweaking. I'm getting my reverb today and in my head, I would have thought to leave the applications settings as close to vanilla 100% as possible if tweaking from elsewhere? Am I right or did you find something different?
@andyr3802
Жыл бұрын
Great video. Thanks. +1 subscriber!
@LocalHero2381989
2 ай бұрын
For me, OpenXR only starts in safe mode. I don't know why, but without it the game crashes when it starts. I use the Pimax Crystal with 4090rtx
@HamVR
2 ай бұрын
When in safe mode, reset your settings to default. Then gradually turn out them back to what they were and you’ll figure what is crashing you out.
@LocalHero2381989
2 ай бұрын
@@HamVR I reset the settings in safe mode and actually managed to get the openxr toolkit to work. But I don't understand why I have to do this process every time.
@87MockingOwl
Жыл бұрын
im using both the FSR from the toolkit and the one from ACC and actually im getting very good pref and quality (toolkit FSR at 85%)
@Goryglory0209
Жыл бұрын
Thanks!
@HamVR
Жыл бұрын
Thanks for the tip Gory!
@drconflict629
Ай бұрын
I just can't get it to open the in game menu. Control down does nothing for me somehow
@tomsawyer2112
Жыл бұрын
I suppose you don't use a motion rig. Because it needs Motion compensation. And motion compensation OVRMC needs SteamVR. But there is also motion compensation XR (OXRMC) for OpenXR. Haven't found a video yet to show this works better.
@muri5176
Жыл бұрын
Thanks for the video! I heared that the VR Performance Tool is also good for improving VR performance. Which one is better? Should I use OpenXR toolkit or VR Performance Tool?
@rendrag72
Жыл бұрын
Do you need this if you have a Quest 2, will it give you any gains?
@HamVR
Жыл бұрын
It will give you performance boost on Quest 2 (PCVR) but see my pinned comment at the top.
@BGR_33
Жыл бұрын
I’m a Q2 user via link cable. I primarily play iRacing using native OpenXR support as well as the OpenXR Toolkit & it definitely gives you gains.
@Steeljohnjo
3 ай бұрын
All games work great but can’t get ACC to show in XR toolkit at all
@balposim
Жыл бұрын
It's not really clear, can the Index leverage something about this as it requires SteamVR anyway?
@HamVR
Жыл бұрын
You can use still use Foveated Rendering and the NIS/FSR upscalers but you won't get the same benefit by passing SteamVR the way WMR users will.
@oringgames4306
Жыл бұрын
I’m going to give it a crack on ACC and dirt rally 2 with my index. I’ll pop it on my channel. Fingers crossed it’s awesome 💪🏻
@pluhcool
2 ай бұрын
does it work on standalone quest 2 or without steamvr?
@gregpruitt1647
Жыл бұрын
What is CPU bound? This term was mentioned in the video with no explanation of what that means.
@fabioramosraces
Жыл бұрын
Can someone help me? I downloaded the OpenComposite ZipFile and it doesnt seem to work. Maybe someone can tell me where to download a functioning ZipFile.
@muzammilkaleemulla6667
Жыл бұрын
@HamVR , Thanks for such a detailed video. Loved the improvements I got following your instructions :) I'm however, struggling to recenter my view, as the games things I'm positioned slightly offcentered and higher. any idea, how to recenter myself? Steam had this option to recenter, but not sure how to here.
@arcangelkq
10 ай бұрын
Thanks for this great helpfully video......following all the steps, but can't seems to get it to show in my Quest 2
@HamVR
10 ай бұрын
Which game? Could be Open Composite isn't working.
@arcangelkq
10 ай бұрын
@@HamVR I've tried with AMS2/ ACC and AC with nothing showing. I managed to get it to work with DCS & rF2. when i open OpenXr toolkit its only showing DCS/ FS2020 & rFactor 2. could this be a possible cause?
@user-gg4nv3dx9s
Жыл бұрын
working with blade and sorcery??
@TheM21001
Жыл бұрын
Great video. Sorry if you covered this already, what performance overlay are you using? Doesn't look like the one I'm used to with the Oculus debug tool.
Пікірлер: 608