I love the fact that these simple tips and techniques keep coming out so we can also improve the quality of not only out work, but the overall customer experience. Thank you!
@lightburnsoftware7189
Жыл бұрын
We are glad to hear the videos are helping. There are many more planned both revisiting some of the older videos as well as covering new features.
@eeddiieegar5408
Жыл бұрын
It's great that this developer keep improving their software
@ruftime
Жыл бұрын
Hail to the Mighty Oz and his Team😎
@patrickdjebar9225
Жыл бұрын
This team is awesome
@swissfreek
Жыл бұрын
Somehow I didn't know this existed and never bothered to adjust my interval, just went with recommendations I found online. Now I'm realizing I was wasting so much time with an interval that was so small it made no difference, and actually made it harder to vary the darkness of the etch since it was basically going over everything twice. My one request would be to add a function to the test tool that cuts out the shape at the end so that you can save it as a test coupon for the future. This is perfect use for a random piece of scrap, but it would be nice if it was cut out at the end.
@lightburnsoftware7189
Жыл бұрын
Glad to hear the video helped. We appreciate the feedback. This has been requested by a few others recently as well. Currently, I have been drawing a rectangle after the test in my workspace to cut out the test. Not quite as automatic but it should allow you to cut out the test for the time being.
@swissfreek
Жыл бұрын
@@lightburnsoftware7189 that’s what I’m doing, too, just would be nice if it was built in like it is for the material test (I think? One of the tools does it)
@ruftime
Жыл бұрын
❤Lightburn Thank you!
@franksmit4914
Ай бұрын
hello its not working, on 1.3.01 i dont get a preview, whats ever settings i`m using. :(
@wtv3dforum
Жыл бұрын
Can you add auto Z "BED" material surface leveling system for the lightburn software? Like 3d printers Leveling Sensors BLTouch etc. Thanks in advance.
@swissfreek
Жыл бұрын
If you are asking what I think, this already exists, but it's a function of the controller, not the laser. Ruida controllers call it "focus", and you need to install a touch sensor on the laser head. You'd obviously need a powered Z axis that was run through the controller, and the sensor like I said. I run one on my laser and it's pretty handy, but a lot of people seem to find it overkill; I do agree it's not critical like on a 3D printer, but still find it very handy.
@lightburnsoftware7189
Жыл бұрын
Some machines to have this. For diode lasers I believe I have only seen it once as often doing a quick manual level is simpler but I was able to find a guide for converting a diode laser to have this if you want to see what the process would be like: diode-laser-wiki.com/documentation/extras/automatic-z-axis-focusing/
@noamlik
6 ай бұрын
Where is the test located in the software?
@xpozec
Жыл бұрын
did you intentionally omit the result of an interval test on a dithered image? What is it that we are trying to get?
@lightburnsoftware7189
Жыл бұрын
Do you mean for the image of the dog as in a before and after? The initial image had already been ran with what we felt was optimal for the laser/material. In the case of the dither test results that are shown under fill, some of it will be personal preference. You are typically wanting the lines to not have a visual gap on an image engrave but also too close can wash out details. The material and even laser settings (speed/power) will have an impact on this. For this image we used .18 interval.
@Turtle58008
14 күн бұрын
@@lightburnsoftware7189 I'm certain he was wondering the same as I. For example, I do the interval dither test and am looking at it but I do not know how to properly translate what the finished test results mean for future projects. Therefore I don't know what an ideal interval is for any scenario. Also I appreciate your videos, there are many people attempting to regurgitate the same things with their own voice and style that just aren't as clear and direct communicators.
@chrisciraldo4935
Жыл бұрын
I can’t seem to find a sweet spot for my laser test all seem burned deep into the wood
@lightburnsoftware7189
Жыл бұрын
If that is the case either increase speeds or lower your power. Have you ran speed and power tests? Going with a larger range above what you have already tried will help.
Пікірлер: 20