The long neck kit literally just arrived. I'm listening she I go through the box. Wow. Now, I use one at the shop where I work part time. It's been put through it's paces, but still does an incredible job. But to have one of my own to assist the Duetto and Mini already in the collection... I can't wait to serve my next client with this thing. I love the Systainer Case as well. Well done, Rupes. Excellent!
@RUPES
3 жыл бұрын
Fantastic. Thank you for sharing and thanks for choosing RUPES!
@MrBod4life
4 жыл бұрын
TOTALLY HELPFUL! I was just about to call you guys asking why the blue 3mm isn't spinning and bogging down way too much even with no pressure on the head of the tool.
@RUPES
4 жыл бұрын
Well, you can thank @N.P.Detailing for posing the question that inspired the video as well. Reserve that blue attachment for spot sanding or for ultra, ultra, ultra fine polishing where a small orbit will excel. Otherwise rock it in rotary or 12mm mode! Thanks for watching!
@MrBod4life
4 жыл бұрын
RUPES thanks will do. Can I ask this why doesn’t it not spin though?
@RUPES
4 жыл бұрын
It does, but the amount it can is limited bc of the small orbit. Less orbital movement means less centripetal force, and that means less “power” behind the rotation. Rotation potential increases much more as the orbit size increases.
@ralfthiele6093
3 жыл бұрын
I never had the idea to make a foto of my first Nano iBrid. Now over the years i can‘t believe that i never worked with that tool. The hard truth for all guys working with an iBrid is that you need minimum three of them. In this way you don‘t need to do handicrafts between your steps. You have a shortneck, you have a longneck and you have a rotation module. THIS is floating workflow. This tool will be everytime in your hand reach. I‘d never miss it!
@RUPES
3 жыл бұрын
It would really depend on how often you change movements. For many technicians in the automotive world they stay with one movement - rotary, with the 40mm backing pad. This is the most precise and effective tool for edgework. If you don't change movements very often, having multiple tools preconfigured with the different eccentric movements isn't necessary.
@Otr_rese23
3 жыл бұрын
Ordered the 6 piece combo kit today can’t wait till it arrives at work 😩
@RUPES
3 жыл бұрын
Awesome. Thanks for your business.
@sauceymeatwad2856
2 жыл бұрын
Can’t wait to use mine! Bought it this morning and I’m on the boat! Time to get after it baby!
@RUPES
2 жыл бұрын
Hope you enjoy it!
@JP-pl9mv
3 жыл бұрын
I bought one two weeks ago and was about to return it, thanks to your video I think it’s a keeper
@RUPES
3 жыл бұрын
Great to hear! Thanks for commenting.
@aldovirzi809
3 жыл бұрын
Perfect, thank you, answered all my questions. Mine arrived today, and was a little overwhelmed, but now I'm excited.
@RUPES
3 жыл бұрын
Glad we could help!
@dustin3700
4 жыл бұрын
I just used mine for the 1st time last night. Bought the box kit long neck and another long neck soft case kit. Worked awsome, only thing I noticed was the unit got a little hot, now I know why oops. I used the Rotary with both backing plates. Corrected great, I just cooled the unit by spraying it with compressed ait every pass along with the pad. I used a eurofiber pad with 3d one fluid.
@totalpackagedetailingllc4413
4 жыл бұрын
Like he says in the video, rotary mode should only be used with the smaller backing plate 😉
@euricogomes9904
3 жыл бұрын
Thanks Dylan,4 months later my litlle girl is on my way 😁, keep going whith your replies! You are helping too much, believe me 👨🎓the arsenal is now complete. I❤RUPES🇮🇹
@RUPES
3 жыл бұрын
Thanks for the kind words and thanks for watching!
@paulborg9609
4 жыл бұрын
Got the nano more than 2 years ago and love it especially on classic cars with lots of tight spaces and curves! Still this info was a great refresher for me. Thank you again Dylan
@RUPES
4 жыл бұрын
Thanks for watching!
@someusername121
2 жыл бұрын
I'd love to see a video showing a whole car and showing different areas where you'd use a 15/75E/nano. Even on a basic Honda Accord nowadays you have concave panels, sharp edges, bumpers with tons of style lines, etc and it's really confusing where you need to switch between tools or where you can get away with a larger pad at an angle or higher speed or whatever (to save money not buying a whole nano setup)
@RUPES
2 жыл бұрын
Great suggestion! In absence of the video the best advice is "if the pad can fit and be flat to the panel, it is effective. If it can't you need a smaller tool/pad combo" Certainly there are more advanced techniques where you can tip in a little (random orbital tools are not ideally suited for this, especially larger orbits) but the entire reason for the existence of tools like the LHR75E and the iBrid Nano are to allow users to work without needing to master complicated techniques to get results.
@paullangley1332
3 жыл бұрын
My Lux kit just arrived, quality product as always from Rupes.
@RUPES
3 жыл бұрын
Enjoy it!
@dave2166
4 жыл бұрын
Did I need a nano? probably not.... Did I want a nano.....absolutely yes... Love it...
@RUPES
4 жыл бұрын
HAHAH! Thanks for watching and commenting.
@bumsniff34
8 ай бұрын
Thanks so much for these videos with clear instructions of how to optimise this tool.ordered mine last week and im going to use it this morning.I feel a lot more confident after watching this video so thank you for taking the time to explain it👍
@RUPES
8 ай бұрын
Glad it was helpful!
@MikesAutoDetailing
4 жыл бұрын
I've been wanting one of these
@catguy64
3 жыл бұрын
I have the kit, it's so cool.
@Rabsallawah
3 жыл бұрын
Me too. I ordered one last night and I cannot wait!
@RUPES
3 жыл бұрын
Congrats! Enjoy your Nano.
@bekiro28
4 жыл бұрын
i love rupes replys teaches me a lot of things
@RUPES
4 жыл бұрын
We’re happy you are enjoying the content!
@jaykid007
4 жыл бұрын
Thanks Dylan. Was just looking into this polisher. Looks like a great tool.
@RUPES
4 жыл бұрын
Thanks for watching. It isn't a tool you'll grab every day, but when you need it you'll be glad you have it!
@jaykid007
4 жыл бұрын
RUPES yep need something for those small areas!
@plujetaudinside8899
3 жыл бұрын
Dylan, can I say "I love you!!!" :-) . This is very helpfull video for who is thinking to buy a nano. This tool is my favourite and I think is basic tool for a detailer. Now my question is: long or short neck...why?
@RUPES
3 жыл бұрын
Thank you for watching and commenting. The long neck nano tends to be the more versatile option due to the longer reach. The short neck has its place in situations where the operator will work primarily with the tool only in one hand or sometimes very compact interior spaces where the additional length of the long neck makes it cumbersome. Overall though, the long neck is the more popular choice if you're not sure which one to go with.
@Foothealthtraining
4 ай бұрын
What about cutting and polishing speed recommendations in orbital?
@atlasprofessionalservices2377
4 жыл бұрын
I absolutely love the nano!!! Its comes in super handy for some areas!
@RUPES
4 жыл бұрын
That is great to hear. Thanks for watching!
@detailmax
4 жыл бұрын
Thanks for information! Very helpful.
@RUPES
4 жыл бұрын
Thanks for watching and commenting. Happy you enjoyed it.
@stevenbeckett8633
Жыл бұрын
You guys make 1” & 2” adapters for this but why not the 3”?
@N.P.DETAILINGUK
4 жыл бұрын
Hey guys many thanks for clearing that one up! I defo didnt get the red attachment but i switched to the rotary and much better! Thanks guys.
@RUPES
4 жыл бұрын
Awesome and thanks for the great question/topic! If you ever need to pick up that 12mm (red) adapter, let us know!
@N.P.DETAILINGUK
4 жыл бұрын
@@RUPES yep i do need one where can i get one? Also need a shroud as mine has broken
@N.P.DETAILINGUK
4 жыл бұрын
I also want to attend a Rupes training course but nobody is doing any here in the UK
@RUPES
4 жыл бұрын
Send us an email and we’ll help get you sorted out. www.rupes.com/contact-us
@RUPES
4 жыл бұрын
Training is extremely limited everywhere at the moment due to covid. With so many restrictions on group gatherings it’s hard for distributors to host them, for people to travel for them, etc. Hopefully things will improve and we can start to roll back into some training events soon.
@pooky9775
4 жыл бұрын
I'd love to have that tool! But why aren't you making a mini version of LH19 E rotary? I have the LH19 E, it's very good with 5 and 6 inch pads but I'm running it at speed 6 on smaller pads and 1700 rpm is not enough for those 3 inch pads.
@RUPES
4 жыл бұрын
Thanks for your comment and suggestion. We'll share it with the development team - in your opinion, what would be the ideal speed range for rotary using smaller (say 3"/90mm) pads?
@pooky9775
4 жыл бұрын
@@RUPES I thank you for being helpful, passionate and organized to provide the best customer service and training in the industry. About the mini rotary, I think top speed 2700 - 3000 would be enough. Because if i need more correction with 3 inch pads I use my old Makita around speed 5 and its 2800 rpms or so. Also to note that I prefer low speed rotary like Jason Rose does.
@djsiuk
3 жыл бұрын
Has anyone lazered a stick on rubberised cover for the head and shaft to stop any potential marks from contact with the metal? Or has anyone stripped and flexi dipped the metal outside? Wasn’t sure if the metal is used as a heat sink. Was thinking of drawing a design in cad and then cutting out some 1 or 2 mm rubber.
@RUPES
3 жыл бұрын
We have seen a few solutions users have come up with, the simplest being a strip of tape if you have any concerns about impact. However, if you are working in compact spaces and impact to adjacent surfaces is a concern you may want to consider a different approach. The metal is not as much concern as the side of the backing pad would be and that is far more likely.
@Methodical2
5 ай бұрын
How do you know which ibrid to purchase...long vs short neck?
@jorgecruz9815
2 жыл бұрын
muchas gracias por las recomendaciones , esperemos sacarle todo el potencial a mi nano hibrid
@RUPES
2 жыл бұрын
De nada. Nos alegra que haya sido útil.
@perfectshave85
2 жыл бұрын
Can you please explain how a smaller pad size in rotary mode is safer? I'm a newbie and am confused about this. Thanks in advance!
@RUPES
2 жыл бұрын
Sure! Simply put - it comes down to edge velocity. The bigger the pad gets the faster the outside edge is traveling, and thus the more aggressive it is. The inverse is true, so as a pad gets smaller the outside edge of the pad travels at a lower velocity and thus carries less risk. This is true of any tool movement where the rotation is driven (rotary or gear driven orbital polisher). When you get into random orbital movements the rule goes the other way. The smaller the pad the more aggressive it is, the larger it is the less aggressive it is (all other factors such as tool speed and stroke length being equal)
@perfectshave85
2 жыл бұрын
@@RUPES Thanks!
@MikesAutoDetailing
4 жыл бұрын
This is cordless...... I definitely need on of these..... I've been looking..... durning these covid times is tough to find..... I make youtube videos and would love to show case this on my videos
@RUPES
4 жыл бұрын
Yes. It actually can be run cordless or corded... that speaks to the iBrid (hybrid) nature of the platform. Demand for this, and all our tools really, has been incredibly high and with delays worldwide in shipping and supplies due to covid they have been in short supply, but wait times haven't been more than a week or two in most cases. If you need assistance getting in touch with a distributor to assist you please contact us www.rupes.com/contact-us
@MikesAutoDetailing
4 жыл бұрын
@@RUPES thank you, im doing this now
@wirraldetailing4598
3 жыл бұрын
I'm about to take the plunge and order the MK3 LHR15, Bigfoot Mini and the iBrid. The problem I have is I'm hearing bad stories about the ibrid's reliability. The last thing I need is £450 tool failing on me during a job. The 1 year warranty isn't encouraging either
@RUPES
3 жыл бұрын
Thanks for commenting. In our experience the vast majority of nano issues can be traced back to heavy handed useage like excessively heavy pressure, running at full speed all the time, or simply doing something like hitting the spindle lock button while the tool is running. Users need to keep in mind that the Nano is a specialized precision tool and use it accordingly. There are nano tools in use in industrial environments where they see use for 8+ hours a day daily and with proper training and application they are very reliable.
@wirraldetailing4598
3 жыл бұрын
@@RUPES At the weekend I went ahead and ordered the LHR15, LHR75E and the Long Neck ibrid Nano all in Deluxe kits! I'll make sure I use them as intended and hopefully they'll work hard for me 👍👍 thanks for the reply
@kolabuzlu
Жыл бұрын
My problem with this polisher is, at some speed dial positions (for example 2) speed is surging up and down, not stay stable. Don’t know why. Anyone experiencing this? Regards.
@johnniekewl2
3 жыл бұрын
ive just got the nano, and the 50% or less compression of the foam pad rule, does that count for the yellow, gray, white and so on, or does it count for all of them?
@RUPES
3 жыл бұрын
Once the pads reach operating temperature, yes... aim for the 50% compression of the foam.
@cliftonboyce6740
Жыл бұрын
I just got this and I thought something was wrong with it, Not sure what is going on, but why do I have to hold the trigger down so hard to keep it going, and it still will stop. Only worked with the Rotary portion. Is mine defective?
@RUPES
Жыл бұрын
Hi, apologies on the delay and for the inconvenience this is causing you. Yes, it’s defective. I’d suggest sending it in direct to us for warranty. Fill out a repair request form here for more information and to get started: rupesusa.com/repairs/
@muradsbikerlife
3 жыл бұрын
Which one is best for motocycle polishing? Long or short neck?
@RUPES
3 жыл бұрын
Long in most cases. The additional length allows you to reach into areas on some motorcycles that would be hard to reach with the shirt neck or other tools.
@muradsbikerlife
3 жыл бұрын
@@RUPES thank you for really quick answer. So, it will be the long Version. Thanks a lot again and take care 👍
@CFLJAMES
Жыл бұрын
Still at trying to remove the head and after roughly a hour I’ve come to the realization that the stop on top is not working and the unit is defective unfortunately..
@RUPES
Жыл бұрын
So sorry to hear about this. Please head to www.rupesusa.com/repairs to fill out a repair request form so we can begin the process of resolving this issue
@advanceddetail
3 жыл бұрын
Just got one and love it
@RUPES
3 жыл бұрын
Great! Thanks for choosing RUPES!
@ShinyFenders
4 жыл бұрын
Dylan, where can I get the extension for rotary use? See time at 3:07 Thanks
@RUPES
4 жыл бұрын
The part code is 291.390/C and is available for purchase from authorized distributors worldwide.
@ShinyFenders
4 жыл бұрын
@@RUPES Thanks !
@dtna
3 жыл бұрын
When are you coming out with a cordless Rupes D/A polisher?
@RUPES
3 жыл бұрын
The tool in the video you just commented on is a cordless (or corded) dual action (or rotary) polisher. Beyond that we do not comment on product development.
@Amolavelocicoaster_363-23.
2 жыл бұрын
hola, mi nano cuello largo kit 2022, tiene dos baterias, una batería al ponerlas a cargar , primero titila una luz roja en el cargador , después se pone roja fija y después pasa a verde es normal? la otra batería al ponerla a cargar enciende rojo constante fijo, y después pasa a verde , cual seria el adecuado ? gracias
@RUPES
2 жыл бұрын
Si consulta el manual del propietario, como se indica, una luz roja intermitente indica que puede haber una falla en la batería. Rojo constante significa que la batería se está cargando. Si cree que tiene un producto defectuoso o dañado, comuníquese con el distribuidor al que le compró el producto. Gracias.
@abdullaalhamdan
4 жыл бұрын
Very informative 👍
@RUPES
4 жыл бұрын
Thank you. We're happy it was helpful.
@staunchy3283
2 жыл бұрын
Hello Rupes! Just bought the Nano and love it. Question-the blue piece that threads the backing plate onto the 3mm functional unit has separated from its base. Is this normal? I just started using it today. Thank you!
@RUPES
2 жыл бұрын
Hello. That does not sound typical, but probably best if you contact us directly so we can discuss in more detail. www.rupes.com/contact-us
@staunchy3283
2 жыл бұрын
@@RUPES will do, thank you so much
@spikedairstudio2888
4 жыл бұрын
It's a good tool, but the batteries are crap. I had one of the two out of my kit die 3 weeks past the 1 year old date. The disappointing part, was I never received a return call or email when I tried to reach out for assistance. I've never had a battery crash on any cordless tool like that.
@RUPES
4 жыл бұрын
Sorry to hear that and the batteries are completely covered under warranty and we are generally very generous with the 12 months window if the failure happens close to it. Where did you send the message? Get in touch with us and we can certainly handle the issue for you. www.rupes.com/contact-us or if you are located within the USA contact us directly at support@rupesusa.com, info@rupesusa.com or call (877)224-5750
@spikedairstudio2888
4 жыл бұрын
@@RUPES I called the US customer service and also emailed warranty/support. I just sent an email to support@supesusa.com.
@norby1117
3 жыл бұрын
Awesome tool, but veeeeeery expensive for me:)
@tugbankert6581
2 жыл бұрын
DVK!
@fernandogomez3936
2 жыл бұрын
Que valor tiene por favor
@RUPES
2 жыл бұрын
RUPES no vende directamente al consumidor. Use el enlace en la descripción del video para visitar nuestro localizador de distribuidores y encontrar opciones de compra en su región.
@Alshather-auto-detailing
4 жыл бұрын
👍
@kimwullems
4 жыл бұрын
How about you sending me this nano and i just try all of your great tips&tricks out :-D..
@RUPES
4 жыл бұрын
Sure... just send a check for the price of the kit first ;)
@kimwullems
4 жыл бұрын
@@RUPES would my smile not just be priceless? :-D
@keithhilton1564
3 жыл бұрын
Why did you make a short and long neck. Seems a strange question, but is one better than the other. Does one have more features than the other.
@RUPES
3 жыл бұрын
Thanks for posting your question. Other than the neck length the tools and all their functions are identical. In development we tested both versions in the field and received feedback that was positive on both for different industries so we decided to make both versions. The long is more popular in detailing because the extended reach it provides. In industrial, bodyshop, and other specialty applications the short is preferred because it is easier to control in one handed operation.
@euricogomes9904
4 жыл бұрын
Before i get my marklll i think i saw all your tutorial videos,i think i have learn to use it efeciently only with that i saw taking care about your tips,i love my machine,now im seriously thinking to get the lhr 75 e...than the nano,i'll have the complete arsenal. ❤rupes
@chrismann601
3 жыл бұрын
Just purchased the Nano to add to compliment my LHR75. Just wondering if there are any adaptors to use with nano so can polish inbetween my alloy wheel spokes?
@RUPES
3 жыл бұрын
The only additional attachment we make for the nano is the 70mm rotary extension bar. Without seeing the wheels and the specific areas you need to address it is hard for us to know if that would solve your issue, but hopefully it does.
@diggerpresley8796
3 жыл бұрын
Thanks for taking the time to reply. The Wheels in question are Mercedes Benz AMG 19 inch black and diamond cut alloys if that helps...
@chrismann601
3 жыл бұрын
@@RUPES Thanks for taking the time to reply. The Wheels in question are Mercedes Benz AMG 19 inch black and diamond cut alloys if that helps..
@jeffadams6416
Жыл бұрын
Can you make a sanding backing plate about the size of a #2 pencil eraser? I would like 2500 and/or 3000 grit sanding pads to prep a paint touch up area and to smooth out paint/clearcoat after a touch-up. The sanding pads provided in the iBrid nano kit are too big for this purpose. Maybe you have another solution? In the interim I am planning to wrap 3000 grit sandpaper around - wait for it - a #2 pencil eraser and wet sand.
@RUPES
Жыл бұрын
Thank you for reaching out to us but unfortunately RUPES does not currently manufacture any solutions for this type of spot repair sanding. After the spot repair sanding is completed, we do offer polishing solutions for those repairs. However, we are consistently innovating new products and perhaps in the future we may have a solution for intricate spot sanding like you mentioned. Thanks for the suggestion, we value the input of our customers.
@Mdetailing
3 жыл бұрын
i currently use, what the industry uses for decates now, a eccentrik pneumatic polisher , witch have 1,2,3 inch pads and plates capability and themendus power but safe because has eccentrik function. witch benefits i will have investing on the Nano on buisness? my kind regards, keep up your great videos
@RUPES
3 жыл бұрын
Pneumatic tools have tremendous benefits, especially in a very busy shop, because of their low level of maintenance and high amounts of power. The Nano is unique in that it offers you the capability to convert the same tool to work in rotary mode, 3mm orbital, or 12mm orbital. It could be a helpful for your shop, it could not. Without knowing exactly what your work is and what applications you have it is hard to say for sure you would see a big benefit from the nano, but it is a valuable addition to any collection if you have the need for it.
@Mdetailing
3 жыл бұрын
@@RUPES thank you sir , i really appreciate your response. Keep up your great work . My kind regards
@matthewsavidge6248
4 жыл бұрын
More clear simple advice and instruction thanks Rupes 👍🏻
@RUPES
4 жыл бұрын
Thanks for watching!
@masonbarnett3927
3 жыл бұрын
Is there information available about why the machine stops while being used, the green light flashes and starts back up. More specifically in rotary mode. Assuming with the red light it is a low battery condition. Is the green because of increased amp load detection and the machine cutting out as an indicator?
@RUPES
3 жыл бұрын
Green flashing on the machine during use would be overload protection. Reduce pressure on the tool while using it (as indicated in the video) and make sure that the spindle lock isn't accidentally pressed down while running. If it continues to be an issue get in touch with us and we can help sort a solution.
@antoineb5877
3 жыл бұрын
Thank you for the French subtitles which are very well done. Finally a channel in a foreign language that I can watch! Great explanation at the same time. (Google translate, sorry if there are any mistakes)
@RUPES
3 жыл бұрын
Glad they are appreciated! We don't rely on the auto-generated subtitles, and engage native speakers to manually translate our content into other languages.
@billborden9755
2 жыл бұрын
I just got my Nano a couple of weeks ago. Love it! I have a question on the blue pads and the coarse compound. I usually set it up as a rotary, with the smallest blue pad, and the blue compound. speed set to the slowest setting. I prime the pad as recommended but the pad seems to harden up and mildly disintegrate after10 or fifteen minutes of use. I watch my pressure on the pad. I bought my first buffer, a Sioux, cast aluminum and I swear it weighed 20 pounds at Wyo Tech in Laramie about 40 years ago. I have been painting and buffing ever since. Learning and making mistakes along the way.
@RUPES
2 жыл бұрын
It would be really unusual for a pad to "harden up" during use because the frictional heat actually softens the foam (by design). It would probably be best to contact us directly to discuss the issue in more detail. You can find our contact information linked in the video description.
@wilfredgomez2632
2 жыл бұрын
TY at the beginning I felt frustrated bc I did not know how to use it. But. Ow is my ToGo polisher. When are the big polishers coming in “Ibrid way”. I’m about to get a Milwaukee Cordless polisher but I’m afraid you guys come with something like that.
@theunkownmr.562
8 ай бұрын
I think the nano is due for an update. Is it six or seven years old already? Given that you've already updated the 15, 21, and HLR75, im going to assume the nano is next, and we'll see it at SEMA this year. 😉
@ShelterDogs
2 жыл бұрын
I've never owned a machine polisher before. Would this be good for a beginner? Like is it practical to polish an entire hood with this?
@Slipsch
7 ай бұрын
Can you send me this to clean my sneakers? :')
@jeffc6832
4 жыл бұрын
I have some hard to reach areas on my cars that I can't get to with a 3"...so I'll definitely be picking up a Nano once I save up the cash.
@RUPES
4 жыл бұрын
Thanks for watching and now we hope you'll hit the ground running when you do get one thanks to this video.
@mihaiorghian527
4 жыл бұрын
Hi Dylan, I can suggest viewers to try the rotary with a yellow wool pad, my opinion is that it is the best combination and no one should be worried that the paint will burn and no holograms remain. Best of luck to everyone!👍
@RUPES
4 жыл бұрын
That is one of our favorite combinations too. Very wide range of performance, but there are still situations where the foams are a better option. Ultimately, whatever gets you the results for your specific application is best.
@catguy64
3 жыл бұрын
Is it advisable to use the sanding disc starting with 3k to level a small paint chip using one or 2 quick passes?
@RUPES
3 жыл бұрын
Thanks for watching! Yes - using the vinyl plate, 3mm attachment, and adhesive sanding discs that come in the kit to knock down touchup paint is doable. Just make sure that the paint is fully cured and the prep was done correctly to avoid the abrasive peeling off that touchup blob.
@Skdjiejxuje
3 жыл бұрын
I want to order one so bad but I feel as soon as I do you guys will release an updated model. Any hints on a new version coming soon?
@RUPES
3 жыл бұрын
Thanks for watching. Sorry, but we do not comment on product development projects publicly.
@xavierfigueroa3509
Жыл бұрын
How much y’all got
@euricogomes9904
3 жыл бұрын
I just unbox mine a few hours ago,can you tell me if its safe to have the batery into the machine if i dont use it for a few days or is it better to keep it off on that situation?
@RUPES
3 жыл бұрын
Congratulations on purchasing an iBrid Nano. If you're going to store the tool for a few days you do not have to worry about removing the battery. Just make sure the speed control dial is set to the OFF position to avoid accidental activation. If you plan to store for longer than that (weeks or a month) it is probably a good idea to remove the battery and store it with the battery cap that came in your kit.
@euricogomes9904
3 жыл бұрын
Thanks 😉
@lars1480
4 ай бұрын
I wonder what I am doing wrong because just Got one of these and I am disapointed I Can do a better job by hand on my MC ?
@RUPES
4 ай бұрын
Sorry to hear about your experience. Is there an issue with your tool? If so, please visit www.rupesusa.com/repairs to begin a repair request with our team.
@CartubeCoIl
Жыл бұрын
Excelent presentation. Thanks!
@RUPES
Жыл бұрын
Glad it was helpful!
@paulwharton1850
3 жыл бұрын
Brilliant video - I learnt a lot - Many thanks !
@RUPES
3 жыл бұрын
Thank you! Glad it was helpful.
@YakAlien
10 ай бұрын
Thanks for the info, had my Nano since about 2019 and love it, its been amazing for cars and expensive bicycle frame detailing !
@XtremeproDetailers
3 жыл бұрын
Thanks for the advice
@RUPES
3 жыл бұрын
No problem!
@rickbarg3980
3 жыл бұрын
I still use the Makita Rotory with a wool pad does an amazing job
Пікірлер: 152