I can't praise Lightburn developers enough, the updates are second to none and the ease of use is excellent (due to this type of video). This has to be the most powerful software for any laser operation. Just a thought to help new users, how about a "How do I?" series of videos for complete newbies to laser cutting and engraving. From setting up a machine for optimal performance and basic maintenance, to the range of software control and usage. I'm sure that we could all benefit from this. Keep up the great work guys, we all appreciate it. 👍
@lightburnsoftware7189
Жыл бұрын
We appreciate the kind words and feedback. We are working on redoing some of the earlier videos as well as filling some of the gaps. We started with initial setup along with a beginner project then moved to the speed/power and interval testing followed by this video. There are plans for more in this beginner series.
@livnenir
Жыл бұрын
That's awesome I had no idea this is possible! I've been storing my settings in a spreadsheet for so long!
@lightburnsoftware7189
Жыл бұрын
Based on what we have seen you are definitely not alone. This should be much more streamlined.
@thehopeyoder
Жыл бұрын
Great video. Love how to the point you guys are. Thanks for an amazing program!!!
@paulkrabbenhoft
Жыл бұрын
Thank you!
@TheBurnsStuff
Жыл бұрын
I love that you say Liberry. I say it that way, too. My family always gives me flack over it so now I say it that way just to annoy them lol. I enjoy these videos. This software is so versatile.
@kingjamez80
Жыл бұрын
The missing R really hurt me ;)
@progettazioneerealizzazione
Жыл бұрын
Well done Dino from Italy ❤
@EM-Smart-Laser
Жыл бұрын
Great! Thank you!
@Ricks2Cents
Жыл бұрын
*Great Tutorial*
@timterschelling
9 ай бұрын
Great video about lie berries ;-)
@wesplummer5588
Ай бұрын
Why do engrave settings in library gray out the assignment button. Cut works fine. Am I missing a setting?
@lightburnsoftware7189
Ай бұрын
@@wesplummer5588 most likely because you have selected an image layer, and are trying to assign a Fill or Line operation to it.
@_justgrant
Жыл бұрын
How can I get LightBurn to save the current window configuration when I close it so that every time I open it my art library is active. Thank you!
@lightburnsoftware7189
Жыл бұрын
It should remember automatically you workspace window layout. It is tied to each device though so you will need to make sure it is set for the device have as default which is the one that it will automatically open with.
@Ruthlesswoodshop
3 ай бұрын
Hitting the new tap and nothing is happening
@Yorkdragonfire
5 ай бұрын
when I click new, nothing happens. I don't get a file explorer window. I'm running os 14.3.1
@lightburnsoftware7189
5 ай бұрын
That only happens when you click Save or Open. New clears the current project.
@Yorkdragonfire
5 ай бұрын
thank you. all I had to do was pay better attention to the video😃@@lightburnsoftware7189
@-mahmoudalarifi
Жыл бұрын
I have a problem that cutting in the y axis is faster than in the x axis
@lightburnsoftware7189
Жыл бұрын
Are you saying when running a cut the laser has higher power moving in one direction? Photos of what you are seeing will be helpful in trying to diagnose. If you can send photos, machine and material info to our support - support@lightburnsoftware.com
@-mahmoudalarifi
Жыл бұрын
What is the problem and what is the solution
@lightburnsoftware7189
Жыл бұрын
Reply is in your other comment.
@artan9908
Жыл бұрын
why i can't buy lightburn with paypal now ?
@lightburnsoftware7189
Жыл бұрын
There is a PayPal icon on the checkout page that can be used. Is it not visible? or is PayPal throwing an error? If you hare still not able to use PayPal reach out to our support - support@lightburnsoftware.com
@Dr.G
4 ай бұрын
I have to leave a comment here just because I consider myself a reasonably intelligent guy. Is this is virtually impossible to follow. If I was as familiar with lighburn as it appears you assume the viewer to be I wouldn't need this video. Just saying. I'm looking to just edit a basic lighburn library, one machine, no more than 5 separate cuts or fills. Can't find a video... Not much stuff for beginners out there. Love my machine so far though.
Пікірлер: 27