what most ppl dont do when they put a walbro carb on is running the pulse port to the crank case to have the internal fuel pump working. It would run 100x smoother with it hooked up
@rcdieselrc
6 жыл бұрын
DAT Blue Husky air fuel mix is not the issue here. With spark ignition this engine would run like a watch.
@jangisgand6140
7 жыл бұрын
Is this engine for sale? I am in desperate need of a four stroke nitro engine. thanks.
@RBAERO
7 жыл бұрын
Are you test in flight???
@WizzRacing
8 жыл бұрын
Good job, You will need to run an ignition source onboard for it to run smooth
@rcdieselrc
8 жыл бұрын
+Claude “Reviews4U” Rains If I have to run plug heat to fly I will consider this a failure. I did modify the head so the plug protrudes into the head a bit deeper and it now runs full speed without problem. Idle is still an issue. More modifications to come.
@carlosj.castillo254
7 жыл бұрын
Hello, how did you adapt the carburetor orifice that is to work with the engine vacuum?
@rcdieselrc
7 жыл бұрын
The carburetor was chosen for this displacement based on air flow.
@tiburciusvanderleeuwen6697
3 жыл бұрын
which model of walbro carburetor did you used?
@rcdieselrc
3 жыл бұрын
WT-456 they are unfortunately hard to find now being discontinued.
@paulspomer16
10 ай бұрын
It works a lot better when priming to turn it over completely rather than flipping it back and forth between the strokes, lol. Never seen anyone do it that way before
@rcdieselrc
10 ай бұрын
Started first flip though? This carb is not pumped though the crankcase, but the intake. Still, I've seen it plenty with two strokes.
@paulspomer16
10 ай бұрын
@@rcdieselrc Yes I’m aware. I’m just saying if you primed it by turning it over while plugging exhaust/intake rather than flipping it back and forth you wouldn’t have to do it for nearly as long. 2-4 flips and she’s primed
@rcdieselrc
10 ай бұрын
@@paulspomer16 If I recall this was the first time this carb saw fuel. I can't complain.
@mamachou2504
2 жыл бұрын
Hello, may I ask where to buy this test stand?
@rcdieselrc
2 жыл бұрын
Unfortunately, these aren't made any longer.
@MyLonewolf25
7 жыл бұрын
Turbo it!
@Nugget11578
8 жыл бұрын
what is with the propeller
@rcdieselrc
8 жыл бұрын
Camera settings and rolling shutter cause the prop distortion artifact. I didn't pay attention to shutter speed when I took the video.
@MyLonewolf25
7 жыл бұрын
keco nation Doppler effect Look it up
@direktorpresident
2 жыл бұрын
As impoverished kids we would run any glow engine on gas, just with a "permanent" battery in the control-line plane.
@rcdieselrc
2 жыл бұрын
How much oil did you use?
@car6on14
3 жыл бұрын
where did you find a carb adapter?
@rcdieselrc
3 жыл бұрын
I made it www.dieselrc.com/projects/ggf120sii/
@car6on14
3 жыл бұрын
@@rcdieselrc wow looks nice, I'm hoping to 3d print parts, I don't have metal machining tools.
@car6on14
2 жыл бұрын
did you ever get to try a higher compression 4 stroke for better idle?
@iman80skid91
Жыл бұрын
Hi.. Why was the back plate changed
@seanacefaustino5834
3 жыл бұрын
What fuel do you use on this kind of engine
@rcdieselrc
3 жыл бұрын
In this case it was gasoline and 16:1 oil.
@seanacefaustino5834
3 жыл бұрын
Thank you very much we have s.o. Max15cv-m engine can run it because we don't know what fuel to use trying a DIY RC
@rcdieselrc
3 жыл бұрын
@@seanacefaustino5834 make sure you use glow fuel intended for this engine. Gasoline will not work. Glow fuel is mainly methanol, and can be made if methanol and castor oil is available.
@seanacefaustino5834
3 жыл бұрын
@@rcdieselrc thank you really appreciate it I'll to look for methanol and castor oil And try to fire up the engine YES we do have glow plug
@emersondavidsiguenzaramire7744
8 жыл бұрын
Hola buenas soy del salvador i quisiera saber cuanto cuesta un motor quiero con parr uno
@FranciscoHernandez-rl2ee
7 жыл бұрын
Emerson David Siguenza Ramires
@emersondavidsiguenzaramire7744
7 жыл бұрын
Francisco Hernandez cuanto cuestas
@cristianmatache7729
7 жыл бұрын
BINE CA omul si a bagat o manuse pe mana cu care actioneaza elicia fiinca altfel ar fi avut degete rupte , am incercat si eu cu un RADUGA 7 rusesc
@gabrielhuang2343
7 жыл бұрын
glow to gas .the engine very easy to over heat. to run few minutes or head up.it will stop.
@rcdieselrc
7 жыл бұрын
If you have problems with stalling once hot, there are things that should be checked. The most common cause is fuel boiling in the carb (vaporlock). This carb is thermally isolated and while it hasn't flown, run very well for as long as I want. The engine still needs some fine tuning for glow ignition.
Пікірлер: 40