I’m an apprentice barber, and learned/learning on a 76 and cordless magic clip. I recently purchased a special edition corded fast feed modified with a ceramic blade. When I first started learning , I researched the history of barbering in this country and was proud to buy American made products. I’m old school and a sucker for the heritage that Oster/Wahl and Andis products give you. I know most consumers don’t ever think Or possibly care, but if the product is made in the USA ,it was a lot more expensive to produce/make, then a product made in China, due to labor cost alone. So yes that cordless fast feed may cost a bit more or the same than other clippers but it also cost a lot more to make. You’re also supporting working Americans.
@thewoodshedbarber
10 ай бұрын
I’m definitely big on buying American Made they just need to make at least on par quality. The original fast feed was great 👍🏼
@two3415
8 ай бұрын
The fast feeds are dope out the box no adjustments needed good for laying the waves down and they fade out of this world💯🔥First time using fast feeds and I absolutely love how they cut and oddly enough I like how they feel in my hand. I enjoy them more than the cordless masters‼️
@knowledgeincrease3326
2 ай бұрын
Im a barber first and cosmetologist for over 30 years . I've experienced using many clippers and brands . Oster is by far number 1 when it comes to power , durability, engineering and mechanism. Compare that to newer brand clippers there's no comparison imo. I do agree with your opinion about the lack luster design . All that said , personally i have certain brands of clippers to achieve a specific task . Oster do not make good trimmers/ finishing clippers so i use other brands . They also need shavers and improve on their magnetic clippers for barbers who prefer that mechanism which are widly used in the industry. They should hire better creative designers . Once those criterias are met and improved , they would be in a class by itself imo . Its possible because of their mechanism why its bulky. They should improve on the Octane design, which was sleek but didn't compromise power . Maybe an Octane with a level and complement it with a great trimmer for shaving and shape ups .
@thewoodshedbarber
2 ай бұрын
Sadly I’ve just given up on Oster
@robrealcuts
10 ай бұрын
Thai was my first professional clipper and I’ll never forget it !
@thewoodshedbarber
10 ай бұрын
The history and love is there! Og fast feeds where great
@jt2475
3 ай бұрын
My corded fast feeds are one of my go to clippers in the shop and my cordless fast feeds suck
@DUICE08
10 ай бұрын
Great review! I was always on the fence about these
@thewoodshedbarber
10 ай бұрын
Too many good options for it to compete. Especially with the philthyblends mod for that blade
@dolbowen150
7 ай бұрын
If you get them get the corded ones
@theBforBrandon
10 ай бұрын
Love the backdrop bro!
@thewoodshedbarber
10 ай бұрын
Thanks brother!
@dolbowen150
7 ай бұрын
People like the ceramic blade cause it makes the tool zero gape-able which the original blade doesn’t but the original blade is set just right to take out the guideline of a fade or taper I love my regular blade that came with it and won’t switch it out I rather my corded fast feed than the cordless one cordless anything is trash
@uncleorr9585
10 ай бұрын
I love your videos thank you
@thewoodshedbarber
10 ай бұрын
Thanks so much!!
@valetudo025
10 ай бұрын
Also side note: maybe some of these other newer companies claiming outrages run times, are actually not accurate. I watched other reviewers who complain that many clippers don’t actually run as long as advertised on a single charge.
@thewoodshedbarber
10 ай бұрын
Very good point
@johnsondoeboy2772
6 күн бұрын
I plan on getting it only to trim down my beard. I think it’ll be fine just for that. My Wahls KEEP getting loud after awhile and it’s thousands of people on Amazon saying the same thing. Andis is too expensive, and I have Babyliss just for shape up- edge ups. Gamma/Stylecraft is made in the same factory as TPOB and TPOB is a fraction of the price, but he’s a douche lol
@thewoodshedbarber
2 күн бұрын
If that’s their only purpose then they are just fine for you!
@johnsondoeboy2772
2 күн бұрын
@@thewoodshedbarber true
@MiguelAngel-yg9zx
9 ай бұрын
I use a oster 76 with a vacuum attachment all day everyday at my shop and no system can put out faster and better haircuts
@thewoodshedbarber
9 ай бұрын
My Dad rolled with that same setup for years. It's all preference. Now Faster? Hands down but Better? Better is a Barber Argument. Any system is made good by the one holding the Clippers. Barber Love!
@infiniteg7852
6 ай бұрын
Can’t stand when barbers use the vacuum
@aaroncline5828
8 ай бұрын
I was told to switch the blade and put the medium ceramic blade and its a game changer!?!?
@thewoodshedbarber
8 ай бұрын
I had no problem with the cutting I just hate the way it feels in hand. I am a huge fan of ceramic blades though
@aaroncline5828
8 ай бұрын
Okay buddy I truly appreciate it save me a couple dollars I'll try it as is if I decide to open the box LOL I still have those and the burgundy pair of cordless 76 in the closet!!!
@thewoodshedbarber
8 ай бұрын
@@aaroncline5828 hey man it’s all opinion from me. I don’t like to yuk someone else’s yum. They are quality tools. Go crush it bro!
@aaroncline5828
8 ай бұрын
Yes Sir, thank you.
@neko_the_barber9000
10 ай бұрын
Dope review 🎯💯
@thewoodshedbarber
10 ай бұрын
Thanks for watching!
@myetoob23
4 ай бұрын
I'm looking at the Oster corded Fast Feed to replace my ~10 yr old Oster Star-teq that's falling apart on me lol. I mainly use it for my personal beard trimming and an occasional haircut or 2 for the boys every few months. I am by no means a barber, just want a durable replacement that'll last me another 10 yrs since this Star-teq has outlasted any Wahl clippers I've ever owned. Would you recommend it? Or is there another clipper you'd recommend
@thewoodshedbarber
4 ай бұрын
Corded fast feed would absolutely serve your purpose
@myetoob23
4 ай бұрын
@thewoodshedbarber thanks for the response! Seen it for $89 on Amazon, was expecting them all to be $200+ so that's a good start already.
@Mike-hy8cs
6 ай бұрын
most people say it isnt for cutting bulk and its only for fading is that true?
@thewoodshedbarber
6 ай бұрын
I would agree with that
@TayBlendz_
Ай бұрын
So just buy the corded ones , huh?
@thewoodshedbarber
Ай бұрын
😂 yup
@TayBlendz_
Ай бұрын
@@thewoodshedbarber got it lol thank you
@justcryHavok
10 ай бұрын
The motor sounds weak..
@thewoodshedbarber
10 ай бұрын
Speed wise yes but the torque is there at least
@jasonmercurio1928
10 ай бұрын
Probably one of the worst production clippers I’ve ever used in my life
Пікірлер: 43