How she going right there eh! I've learned lots from the Bearded Carpenter great videos on explaining the whole hand tools use and layout for dovetail log building and timber frame construction he's a master at it...
@StGroovy
2 жыл бұрын
I might invade Ukraine myself for those chisels.
@johnhatchett6234
2 жыл бұрын
Troy - you might want to check out The Tradesman Channel. Jim built a timber frame barn and has a lot of videos explaining “how to” do much of what you are about to do. He has videos ranging from brace layout to scarf joints. He is very informative. Thanks and can’t wait to see you your project come to life!
@rickayers3150
2 жыл бұрын
I was going to say the same thing. Jim is the best.
@ChainsawChuckSmallwood
2 жыл бұрын
Greetings from falling waters my WV neighbor! Those tools are BEAUTIFUL! I’m in awe of that craftsmanship.
@hahsmc
2 жыл бұрын
Hi Troy, I’m timber framing my barn over in Roane county. I use a 2” and a 2 9/16” Forster type bit to drill the mortises then clean them out with a chisel. I’m a first time timber framer as well. I’ll email you some pictures of what I’ve came up with.
@mikematheny1778
2 жыл бұрын
Check out Mr.Chickadee he does everything with hand tools!
@lpeterman
2 жыл бұрын
Must concur -- Mr. Chickadee has forgotten more than most of us will learn.
@amtraktrekker
2 жыл бұрын
Some unsolicited advice on using chisels. When setting a chisel on the bench, always place the chisel bevel-side down so the cutting edge doesn't contact the bench. I had a teacher who would drop what he was doing and walk all the way across the shop to tell me that. Second, when chiseling the tenon from the end, start about 1/8" above the line and break off the big piece, then work down to the line across the grain. That way the chisel doesn't follow the grain. That being said, your joints appear to be plenty tight. Great job, Troy.
@RedToolHouse
2 жыл бұрын
Good advice!
@bwillan
2 жыл бұрын
A forstner bit is also a good choice for making mortice holes in a leg. Works better in a drill press (if you have one).
@terrycarl8923
Жыл бұрын
I can't wait to see the timber frame process I am slowly learning to do it too
@SheratonParkFarms
2 жыл бұрын
Nice work. Learning the new skill is as much fun as the finished product. Been watching some time freaking videos and you are exactly right. They miss a lot of the necessary detail to get you going in the right direction.
@dorajii-channel
2 жыл бұрын
Hello. It's a very nice video. It will be helpful. I am maintaining my registration. See you again. thank you.
@franklt35sawyer49
2 жыл бұрын
Saw one of your older videos that you spoke about legally using lumber you mill yourself. In Wisconsin you can take a 1 day course named "WI LOCAL USE DIMENSION LUMBER GRADING CLASSES (WI LUDL)" run by the DNR. After that you can use it to build your house. You can also legally sell it to the end user to build his house. you just have to cut it 1/16th oversize (1-9/6" X 3-9/16" for nominal 2 X 4's (1-1/2" X 3-1/2" actual size).
@runeare1
2 жыл бұрын
I haven’t tried it yet but I’m thinking I can cut the 6x6 and 8x8 tenons with my Woodmizer mill and the shoulders with circular saw. Great video thanks
@krazykeltic8103
2 жыл бұрын
DO NOT hammer on a slick! Mallets are made for use with chisels. Slicks are finnesss tools! The only thing that is supposed to be used with them is muscle power. striking them distorts the blade, dulls them and causes more problems. The sharpness of a slick should be able to split hairs shaving wood should be no problem.
@RedToolHouse
2 жыл бұрын
I didn’t hammer a slick. Didn’t even use it
@lpeterman
2 жыл бұрын
Concur with K Kelt -- your Kharkiv 2" framing chisel is handled the same as the 4" timber slick; steady pressure from palm and/or sternum is all one needs. Think of it as a block plane -- glide across the grain. We all must learn sometime -- don't ask me how I know...
@backtothepast1850
2 жыл бұрын
Troy, you are always an inspiration to me. I have been doing historic restoration in Colorado for many years, however I haven't seen or done a lot in the way of mortish antennan joynery. I have been doing historic restoration in Colorado for many years, however I haven't seen or done a lot in the way of mortise and tenon joinery. I made a bed that I wanted to be historical in appearance, so I used mortise and keyed tenon joints. If my 1st mortise was not pretty, but in the end it amazed me how strong the bed is, and looked good too. I think it was episodes 15 and 16 on my channel, if you'd like to check it out.
@larrybourne8430
2 жыл бұрын
Troy, enjoyed your video very much and look forward to seeing progress on your timber frame. I’ve done a little timber framing myself and I would suggest that you try the Wood Owl auger bits. They are made in Japan and are precision bits which are easy to control. The 7 inch length is all you need for mortises.
@noahhutchens4523
2 жыл бұрын
Excited to see you getting into timber framing as it is a interest and hobby of mine as well. I own and use the same Japanese saw you bought and can say I enjoy it many times over a traditional western saw. I own the “old fashion drill press” you were talking about, I’ve heard it called a “wood boring machine” or a “beam drill” and won it at an auction in Jane Lew a couple years back. Another thought I had while watching is that to tighten up the mortises even more would be to “draw bore”. Offset the holes about an eight to a quarter inch so they pull tight when you pound in the pegs. Careful not to offset them in the wrong direction so it doesn’t pull it out instead of tight(ask me how I know). Anyhow, I think the saw horses will be a great step up from your former working space. Great job.
@barryfields2964
2 жыл бұрын
Kelly is so cute. I wish she was in more videos.
@paulsalvaterra
2 жыл бұрын
Good luck, very difficult to combat racking with post and beam methods, something to be concerned about
@jasonbroom7147
2 жыл бұрын
I don't even need a set of those tools, but I STILL want one! :) When you talked about expensive tools, I thought for sure a mortising tool was something you were investing in.
@toddhauck6487
2 жыл бұрын
Hi Troy, I don't really comment often but have a question. Awesome and informative video. have been watching you a few years but this brings me to my question. All of the videos you have done on graded and stamped wood to make it legal for building materials where do the timbers fit in as far as being legal to use? I've read so much about building timber frame with more of a green timber so as it dries it sucks the peg in and makes a tighter joint. How does all of this work as far as inspections are concerned? Thank you for any information.
@rickayers3150
2 жыл бұрын
Welcome to timber framing, once you start every tree you see will have a project in it. From someone who' started over 25 years ago. Now you have the bug.
@RobertJLessard
2 жыл бұрын
The old style manual brace and bit is way easier with those large auger bits. That's the old way it wa done as well.
@leslieandrews6324
10 ай бұрын
I like using forsnor bits for hogging out mortises and I use a forsnor bit extention a lot of times. That post hole auger maybe ok for larger timbers and use a larger slower drillmotor. Also about once or trice a year I will sharpen all my beveled edge tools with a honing guide then I buff them out.
@kevinblevins2612
2 жыл бұрын
The dowels should absorb moisture from the green lumber and expand to form a tight connection
@paulsalvaterra
2 жыл бұрын
U know your pin holes will shrink away from the hole, not as u stated, they will only loosen, u will see. Another problem with post and beam
@donmartin7728
2 жыл бұрын
Arm chair recommendation. Would it be possible to build a shelf under or to the side on the legs to hold your tools? Could be another brace between the legs with holes cut at an angle, something to help keep those mirrored chisels out of the dirt or being dropped from a tool pouch.
@rickayers3150
2 жыл бұрын
Troy your going to find them horses to hi , your going to want your work piece low enough to sit on.just a thought
@jerryinmon2731
2 жыл бұрын
Aaaah Troy I'm so sorry you had to buy some new tools!!!🤪🤪🤪
@stevenkirby7478
2 жыл бұрын
Its refreshing to see what a real shop looks like in that you normally see a nice, everything in its place, clean room. Your shop is what a shop actually looks like, don't get me wrong now, I'm not being negative, it's just that you show an actual down to earth working shop layout.
@RedToolHouse
2 жыл бұрын
My shop is a nightmare. I am terrible at organization.
@davidj.mackinney6568
2 жыл бұрын
It seems to me that you need a 10 inch circular saw.
@thebradleysoncatbirdhill6849
2 жыл бұрын
Troy I am just beside myself watching this video! It could not be better timed! I read Beamer's book, and I am designing a timber frame sawmill shed. I am in the process now of sourcing tools, and I really appreciate all of your insights. I can't wait for the next video! 👍👍👍
@MsdMakingSawDust
2 жыл бұрын
Hello I just built my sawmill shed and did mortise and tenon 8x8 beams Just to let you I found out after I built my building I could do all my tenons on the sawmill . They come out completely perfect on the mill.
@PeaceIntheValley
2 жыл бұрын
Nice video! You can quickly and easily use you the notches on your swanson speed square to slide along the board to mark your lines in the middle of the board rather than sketching with the combination square.
@DeanFamilyAcres
2 жыл бұрын
Cool build. Mucho respect for timber framing, time to complete can be unreal. Liked the editing at the beginning with both of you talking over the footage.
@davidj.mackinney6568
2 жыл бұрын
Very interesting video and entertaining.
@TN-Land-Manager
2 жыл бұрын
Well done video. I’m not a big wood working fella, but I enjoyed that. Had to look up some terms you used but I got it. Looking forward to it. Hoping to see a 2022 goals video. Always like to see what everyone wants to try and accomplish.
@peggypastime1278
2 жыл бұрын
Wow. Great job. Can't wait to watch the upcoming videos! And yeah - Kelly is so cute!! Someone commented on cleaning up and organizing the workshop - hubby said he'd come do that for ya! Of course, it may cause you not to be able to find what you need.... but he would have everything with labels on it! LOL.
@SmithyScotland
2 жыл бұрын
Can I suggest spending some time cleaning and organising your shop before you start any big projects. Will make life so much easier. Looking forward to the builds over 2022.
@markee063
2 жыл бұрын
Expensive tools?!!! I'm in! My new mill doesn't even have oil in it yet. I have a 800sq ft addition and a 3000 ft barn I want to do in timber frame. CANNOT WAIT for all these new videos!
@joemc111
2 жыл бұрын
Troy great video, For the last few weeks I have been watching videos about Ukraine. “Bald and Bankrup” channel goes into places like Ukraine to show the real way these people live. So I am looking forward to the work on the timber frame project. I like many of your followers would like to come for a few days to see your part of West Virginia.
@stewartweatherbee8114
2 жыл бұрын
Great video Troy. Appreciate that you're going to include us in your learning journey in timber framing. Just might inspire me to do some myself. Got a lot of ash logs that could be transformed into something useful and practical.
@jbbrown7907
2 жыл бұрын
No triangles?
@terrypomatto907
2 жыл бұрын
This is going to be very interesting. When I was young I bucked bales for a farmer and his entire barn was built like the Timber framed that you are starting. The barn was put together with pegs. This barn was well over seventy-five year old.
@joeford7350
2 жыл бұрын
You are very talented Troy!
@toddcaskey9984
2 жыл бұрын
Great job , I just ordered the book and I have that saw already. I have some timber frame chisels so I'm going to get into it a little also . I like the fact u are doing this. Todd
@mattruby3966
2 жыл бұрын
You should build a timber frame greenhouse up by the house as your practice piece for putting together a building, you could use 4x4 like you did here since it isn't going to be large or weight bearing.
@kevinschroeder3889
2 жыл бұрын
Nice, you should build me a set. LOL Just think of all the practice you'll get.
@mburke1211
2 жыл бұрын
I am very much looking forward to following along with your timber framing project!
@jerrybriscoe4735
2 жыл бұрын
Nice work
@hendrikelliott7558
2 жыл бұрын
??Ỗ?Ø?M ☝️
@RichSobocinski
2 жыл бұрын
Felt so bad for you watching that table sway with every movement on your work. You'll definitely want something solid and HEAVY before getting too far into this work.
@RedToolHouse
2 жыл бұрын
Yes. Really underscored the need for the saw horses
@alanviner3711
2 жыл бұрын
brace and bit is what I think you are looking for
@jesselove6989
2 жыл бұрын
Great video, very interesting I had never seen how that was done.
@davidcarroll7114
2 жыл бұрын
I looking forward to your project.
@lynnhudson838
2 жыл бұрын
Sehr gut!
@timsheteron7903
2 жыл бұрын
Yep Forstner bits
@RedToolHouse
2 жыл бұрын
I have a set but they need replaced. Putting those on my list for sure
@tsaligrass
2 жыл бұрын
while using the chisel keep the flat part up. that way you control the depth of the cut and the chisel will push the cut material up
Пікірлер: 69