For more bike repair videos hit the subscribe button 🛑 and click the notification bell ► bit.ly/SubRJTheBikeGuy
@YourMom-kp8xs
5 жыл бұрын
RJ The Bike Guy just one question, how did you clean the bearings?
@RJTheBikeGuy
5 жыл бұрын
@@YourMom-kp8xs Often in mineral spirits, and with citrus degreaser and a scrub brush, or a combination of both.
@YourMom-kp8xs
5 жыл бұрын
Thanks bud, been slaving on my bike all day!
@glenlarimer1358
2 жыл бұрын
Doesn't matter how long since you posted this - you're ALWAYS my go-to guy for these videos when someone brings me some "new" bike problem to fix!!
@MikeNBikes
Жыл бұрын
THIS is the video I needed. I can't even bare to watch Park Tool videos with that old guys monotone voice and turns really simple procedures into sales videos for tools sold by Park Tools. No, I did not need the $30 - 15mm pedal wrench. I used my 15mm craftsman wrench and it worked just fine. I can't tolerate their videos anymore. Every. Single. Video. is a tutorial with them advertising the entire time. You think about it, Park Tool - like what do they actually do? It was smart. They made a bunch of tools for bicycles, then made tutorials on things people would know, all while advertising their tools. That's the real purpose of ParkTool's tutorial. Thanks a ton RJ
@KrazyGoodMods
22 күн бұрын
That is true. It would have been better if they just made the tutorial and referenced the tools they used at the end or in the description.
@celynjones4958
3 жыл бұрын
Once again you've saved my bacon. Both my kids bikes needed BB overhaul with one piece cranksets. Now both are super smooth and wobble free. Many thanks as always RJ
@Phylthya
3 күн бұрын
This channel is pure gold. Never thought I'd come across a bottom bracket like this. But today is the day! RJ to the rescue!
@kaylag4764
9 жыл бұрын
It's been awhile since I've worked on a BMX bike (been working on mountain bikes and road bikes for past 7 years), and I love the old school style cranks! I don't feel like I'm going to snap them off when I'm cornering, or even at the dirt jumps! So thank you much for the video... It was a great refresher!
@mcnizzie9525
7 жыл бұрын
Thanks man you/ your videos are so helpful. Thanks to you and a couple of other people(mainly you) I was able to take apart my first bmx, custom paint it, and put it back together with very few problems
@fxd_edd
5 жыл бұрын
Same here, I converted the whole bike from an abandoned Walmart kids bike to a "pro" BMX bike you would find at any bike shop
@user-by2mt2hk2p
5 жыл бұрын
[Blank ] how pro can it be? Being a Walmart bike. Even with nice parts those frames are garbage.
@FrankLadd
3 жыл бұрын
Super simple. I've never seen it done with official bike tools before. Great!
@KnuckleChin
3 жыл бұрын
I found an old school 82’ SE Racing Mini-Ripper, 92’ Robinson Pro and a 82’ RaceInc RA5 in my father in law’s garage. With new (old but new) bottom brackets. Thank you for the video!
@acoatl8454
4 жыл бұрын
Finally someone not doing this on a mountain bike.
@timoto6323
5 жыл бұрын
My dad thought me this back when I was younger and i still keep taking apart old bikes to build nicer bikes
@filamanselbow
8 жыл бұрын
Cheers RJ, this helped me with my first rebuild of a Raleigh TAP . To all those people with negative comments... Just because you have an opinion it doesn't mean its right..
@tyrotrainer765
8 ай бұрын
Fantastic video! Clear, concise commentary and zero waffle. Good camera work too. You gave me the confidence to order a new bearing set - good as new! Thanks, liked and subscribed.
@LookieHere7
4 жыл бұрын
Helped me a lot, no mechanics want to work on bmx bikes in Colorado so I’m learning all of it myself. Thank you !
@charlesriley4633
2 жыл бұрын
Your definitely my favorite bikel mechanic to watch !!!the way that your tutorials go through everything makes it very simple at times laugh out loud but otherwise yeah you're my favorite
@hugopettersson2563
8 жыл бұрын
This saven me Money thank you
@damian33dc
9 жыл бұрын
The more I watch RJ the more I like your channel . An American crankset another name for it is a one piece crank aka Ashtabula It looks like the rear wheel of that BMX is a 48 spoke wheel. You mentioned your talent is to disassemble and reassemble any mechanical systems but also the way you present the show .. I'm an old school bike mechanic and I enjoy wheel building the most:-) I would like to give you a heads up of good quality tools made by cyclus tools based in Germany.. I recently purchased a bottom bracket thread chasing tool for BSA 1.37 inches by 24 threads and facing tool all under 500 Canadian dollars about 400 USD.. Just for my home hobby shop:-) I also like Park Tool but there are other great European and Taiwanese toolmakers for bicycle mechs. Thx Damian.
@bigsmoke1811
6 жыл бұрын
damian33dc I too work on bmx bikes of all kinds I prefer headset and bb work the most tho
@fatboybfg
9 жыл бұрын
this guy is good hes helped me in fixing my mtb saved me money thanks rj from belfast northern ireland still having trouble with fixing brakes iv doon it all but no so have to leave in shop
@RJTheBikeGuy
9 жыл бұрын
What is the issue with the brakes?
@fatboybfg
9 жыл бұрын
RJ The Bike Guy hi rj they r real loose u can pull them right in. but iv doon the wee screws on each side of the brakes but no i think the barrel adjusters r broke on booth sides
@RJTheBikeGuy
9 жыл бұрын
Then you might need to just replace the brakes then.
@fatboybfg
9 жыл бұрын
RJ The Bike Guy just got them fixed looked at more of ur vids ta rj
@apocalypseofdeath3244
7 жыл бұрын
RJ The Bike Guy dude how did u get that bike I always wanted that when I was a kid
@KrazyGoodMods
22 күн бұрын
Nine years later, this video is still helpful. I'm rebuilding a 2016 Redline Roam.
@samuelwebb5563
2 жыл бұрын
thankyou bro this really helped a lot!!! i’ve got a mini rocker and needed this off👍
@dodgygeezah4707
4 жыл бұрын
Brilliant tutorial RJ! All my questions answered. Thanks so much 😊
@mikejordan4899
Жыл бұрын
Thank you for this very useful information. I'm currently cleaning the bearings and replacing the chainring on my Dyno Roadmaster and this vidieo was very handy. Thanks!
@longhorn8459
4 жыл бұрын
You’re on a roll for my bmx restoration! I took the crank arm off but decided not to pull the gear completely off, I guess there’s not real reason to if the whole things cleans up nice. Thanks for sharing! Bike shop got the races out for me and gave me new hardware for my 88 restoration, need to paint this weekend!
@CWfist
8 жыл бұрын
My nephew asked me for help on this exact issue today, it rained all day so we could not do it and got pushed for tomorrow, I had no idea of how to do it ... Now I do, Thank you.
@Ahmed12529
4 жыл бұрын
so clear and simple, amazing, i have the same old system now i will take your video as a guideline to overhaul my bike's bottom bracket.
@Blanco_SubieForester
4 жыл бұрын
This Sunday’s Morning Project!
@lornaz1975
9 жыл бұрын
I'm so glad you make bike vids!
@diskreteone1967
4 жыл бұрын
Omg thank you! For not even trying. A guy in my area was giving a free old bmx bike wich we had no idea what it was but it had a big T logo wich I remember seeing somewhere & looked like it had another letter behind it possibly. I searched for days & gave up & while watching this video for the second time I noticed that logo on the sprocket of ur bike & then BINGO!! TREK BMX!! Shitcheah!
@IUsedToBeANinja4895
9 жыл бұрын
I'd love to see a video of all the bikes you own; would be pretty interesting. We never see the fate of all the bikes you show haha :)
@sipemofo
4 жыл бұрын
Exactly what I needed for my kids 16 bike. Thanks!!
@santipshangpliang9064
7 жыл бұрын
thanks man this sprocket matches with my bmx.Habe searched for lots of vids but this helped me alot...THANKS
@gspiggity
5 жыл бұрын
Thanks man this vid helped me as i am rebuilding a vintage BMX that was in pieces shows me I need some bike tools like yours though
@3viz404
3 жыл бұрын
I’m tryna do my gt pro freestyle tour. Wat size bearings should I get ????
@lannlann
Жыл бұрын
Thanks for info on counterclockwise to remove bearing nut holding the chain wheel. I would have thought that was clockwise to loosen.
@ya_boi_zak5927
2 жыл бұрын
Thanks. Seems simple enough. It helps being mechanically inclined for things like this. If I can work on cars then surely I can work on bikes!
@stevegaines1
6 жыл бұрын
Great video and description while fixing it. Thumbs up.
@RandyDarkshade2
9 жыл бұрын
I've seen this style of crank on Apollo Mountain bikes (I think it's a UK only brand?) A friend mine kept killing bearings because he kept riding the bike with a loose crank, eventually it bent the crank and warped the bottom bracket barrel writing off the frame. So if you notice an significant play in your bottom bracket get it fixed as soon as possible as it can damage the bottom bracket barrel/tube.
@HELLEKSONART
6 ай бұрын
Best vid for me. Mine is a Diamondback Viper from 98
@skyelee9398
5 жыл бұрын
Thank you, very informative. Greetings from Oceanside, California
@isaiahlewis6218
8 жыл бұрын
I hate how people hate on your videos you have helped me fully restore a J.C Higgins bike from 1953 cheers mate also my cousins mongoose bmx bike has rear v brakes and they stick bad could you do a video or comment on this with some tips to help thanks in advance
@RJTheBikeGuy
8 жыл бұрын
+Isaiah Lewis You need to isolate the issue. Is it the cable or the brakes themselves. Disconnect the cable from the brakes. Are the still stick? If not, replace the cable. If yes, then clean and lube brake pivot points.
@isaiahlewis6218
8 жыл бұрын
Thanks man I got it fixed it was the cable
@RJTheBikeGuy
8 жыл бұрын
Cool!
@paulcooper7137
7 жыл бұрын
Thanks R J great video helped me put my bike back together
@williamemilceleiro9857
2 жыл бұрын
Excellent video! ....I would love to get rid of those cages and get the benefits of loose bearings. Those are 5/16inch bearings aren't they? I notice there are nine in cage. How many would you recommend I use when ditching the cages? Thank you for your time and kind attention. Cheers!
@jdebella2610
6 жыл бұрын
Dude your like the dad i never had .....ineed some taperd bearings for an old school gt 20" help .. .thanks j debella
@skorpiolovesmith
4 жыл бұрын
Love your videos it’s helping me put my bike together saving money from the bike shop
@scottygorton
3 жыл бұрын
Cheers. Got it sorted out. Thank you 🙏 very much . Scott y
@XGaming1
4 жыл бұрын
Just bought a mongoose mode 180 for $5, it’s in good condition and after removing all the stickers, reflectors, and breaks it looks like a real decent BMX bike, one disappointing thing is it has one price cranks but can’t complain for $5 but yeah need to tighten the bottom bracket.
@crown6468
4 жыл бұрын
5$ where the fuck did you get a 5$ bmx
@XGaming1
4 жыл бұрын
BAsalcrOwn FTW on letgo, the guy didn’t want it, also I had to drive for 15 minutes there and back.
@jeffcapers8618
5 жыл бұрын
Great video, love all of your videos but one question! Why put grease on the pedal/crank arm thread? Wouldn’t you wanna put anti seize lubricant or something of that fashion there instead?
@senditsupplyco.8824
5 жыл бұрын
In BMX grease prevents seizing and rust and is really cheap to get a lot
@hectoralexander985
6 жыл бұрын
Thanks for this video it is always a great help to me! 💯
@charlesgeorge8111
Жыл бұрын
thank you Bike guy RJ; just want a durable bottom bracket for an all aluminium MTB!
@moiusa
3 жыл бұрын
Helpful video.. Thanks a million for sharing.
@steveauguste4498
7 жыл бұрын
Great video. I didn't know the crankset could be stripped to the bones like that!
@Rowdeegolf
2 жыл бұрын
I see a lot of these iny shop. 2 things. First, the keud washer on the non drive side has a tab that indexes in the keyway slot on the crank. They wear oit and turn. Not supposed to. 2nd, Every one Ive done required removing both cups. Crank would come out otherwise. But, if you are gona disassemble them, do it 100%. Oh, put the bearing ring in your palm and pit a dollop of grea on it and push/turn the bearing to force grease in the bearing. Ball side up in your palm.
@damianwestcott8885
5 жыл бұрын
Thanks mate great video .! You just helped me put a crank together..!
@BerserkerNick
5 жыл бұрын
When refurbishing one piece cranks on bmx bikes I always replace the bearing cups because most bmx bikes take alot of abuse and often times the bearing cups will be warped
@tarquiniusgaylord8168
9 жыл бұрын
RJ your videos are great, respect due.
@commentpost907
4 жыл бұрын
Very thorough. Legend
@nicolasduarte2883
Жыл бұрын
same, Saved my latest Proyect. Thompson Bottom Bracket are just a Nightmare :P
@bernyalvarez6830
6 жыл бұрын
Tus vídeos son los mejores, muchas gracias por compartir
@danushkamenikkumbura
9 жыл бұрын
Thank you. It was quite useful.
@kambinkelam8983
5 жыл бұрын
this video save for MT my old rigid mountain bike, tho I have no any kind of wrench you got there sir. moreover here in small port town mostly bike shop/repair using a large pipe wrench as they got no specialized wrench. and to remove/reinstall every part that had hole on it or to cut off chain or remove/reinstall threaded rear cassette they using brute force. using a mallet/hammer and a dull chisel/ a dull nail. sound stupid, but it's works. so what dya think sir? should i adopt it too as 'How to MT Bikes in Hack/wrong way' ? thanks :)
@hectoralexander985
6 жыл бұрын
Always a BIG help!
@bellaassa4946
Ай бұрын
Wich you gave us a solution for thiese bottom bracket style becoming loose overtime i have a entry level indoor bike with the same type and it always get loose even with 2 consecutive nuts
@nathanramirez6558
4 жыл бұрын
This made my day
@joekahno
5 жыл бұрын
It's always better to replace questionable parts. Sometimes though, a replacement either isn't in the budget or isn't readily available. Careful use of a center punch on a well supported washer can extrude the key far enough to restore the locking function.
@nwsa.opixzv
4 жыл бұрын
Thanks a lot, I clearly didn't know how to take out the big gear sheet like
@nolancoates4856
2 жыл бұрын
Groovy guy 🙋💯 thanks 👍
@shapzadeh1379
4 жыл бұрын
very nice job. thank you very helpful.
@fidelortega8704
9 жыл бұрын
If you watch it x2 speed it sounds like he is being threatened to fix the bike 1:17 lol
@kerm1t_z_fr0g18
4 жыл бұрын
Fidel Ortega how did you figure this out
@RunningBack1978
9 жыл бұрын
Great Video R.J.... Thank you.
@tubenachos
4 жыл бұрын
I'm addicted to bike building 😅😁, helpful stuff thanks!!
@ironman1518.
4 жыл бұрын
Thank you great explanation! Could you replace the caged bearing sets with loose bearing so as to have More bearings carry the load per side? I understand it would be tricky NOT to have the loose bearings fall out as installing the crank but grease would hold them in place. Thank you.
@RJTheBikeGuy
4 жыл бұрын
Probably. I haven't done it on a one piece crank. I have done it on 3 piece cranks. kzitem.info/news/bejne/o4ScuHhqfoZ1f2U
@UknownWorlds
4 жыл бұрын
Hello RJ. I would like to know how to replace the chain rings for this type of crank. My S crank has 2 chain rings inside of them.
@RJTheBikeGuy
4 жыл бұрын
Then it's different than this. I can't tell you without work on your crank.
@markharrington7152
8 жыл бұрын
Useful... now to do it myself.
@rokkfann999
Жыл бұрын
What kind of bottom brackets are compatible with the shell type shown in video??
@sorenaberger2597
4 жыл бұрын
That was really helpful. Thanks alot.
@janetsquires2320
7 жыл бұрын
thanks for the help saved my bmx
@Felix24148
3 жыл бұрын
Hey I have that same pedal wrench
@harryo6126
11 ай бұрын
Saved me, I was about to mess things up.
@brianmiller5074
4 жыл бұрын
I recently purchased a 1983 Predator team 24 frame and fork and am now trying to piece this together. The bottom bracket is for a one piece crank. The crank is 175 mm. Where and what size do I need to be looking for. Are all the one peice cranks the same size? What exactly do I need to know when searching for the correct size? Thanks good video.
@RJTheBikeGuy
4 жыл бұрын
I am guessing they come in different sizes. Never replaced a one piece crank. You can replace it with a 3 piece crank. kzitem.info/news/bejne/mK6KsGiQpomeiG0
@j4techmediajishnusreedharst
4 жыл бұрын
Thank you very useful video
@silosis
5 жыл бұрын
love the channel glad i found a bmx video too lol. nice bike
@redneckwithajeep5001
6 жыл бұрын
Is there a way to upgrade this setup to the modern ones or do I have to reuse all of my old parts. I was given a bike yesterday that uses this setup but it was disassembled probably 25 years ago so some parts are missing. Also much of the bike has been laying in a pile of bike parts to other bikes so I don't know exactly what is for what
@crimsonqstattoo1972
2 жыл бұрын
6 years late but thanks for the video brother!
@mikeatv
6 жыл бұрын
lol good video.... helped me out... if I had tools like that I probably would've went a little quicker....
@Anonymous-iz1oy
2 жыл бұрын
Thank you for the video.
@carlosamador8085
9 жыл бұрын
Hey RJ, are you going to make follow up videos on fixing this bmx that would be awesome
@RJTheBikeGuy
9 жыл бұрын
Yeah, I hope to get a few more videos out of this bike. I am currently working on overhauling the rear hub.
@seandan68
5 жыл бұрын
looks so good with a rusted sprocket
@fidelortega8704
9 жыл бұрын
Love your videos just subscribed today
@SuperPlaned
7 жыл бұрын
cheers got crank to adjust bmx wondered how it came a part :)
@harryledwith3311
5 жыл бұрын
Hi RJ - I'm doing a bottom bracket overhaul (in Spain) on a Polish Romet Mistral from the 80s which has cups like on here. I knocked the cups out to clean everything. Can you tell me the best way to re-insert the cups so they are solid please? Thanks - I love your vids and your style mate!
@RJTheBikeGuy
5 жыл бұрын
Put a thin coating of grease on them to help them slide in. Put a piece of wood over them, and tap them in with a mallet. Make sure they go in straight.
@harryledwith3311
5 жыл бұрын
@@RJTheBikeGuy Ok thanks very much for the quick reply. Will give it a go
@jaytcapinpin
4 жыл бұрын
Thanks for the video! Questions....what if the bearing cups on the frame doesn't hold the bearings in place anymore? Does that mean the entire frame is no good?
@RJTheBikeGuy
4 жыл бұрын
The bearings are sandwiched between the cups and cones. Sounds more like an adjustment issue.
@jaytcapinpin
4 жыл бұрын
@@RJTheBikeGuy Thanks for the response, after further inspection, my bearing cups were shot. Popped them out and slapped on a new set....we're rolling again. 😁
@richardcook1273
9 жыл бұрын
thank u u saved me a lot of money
@tylerbyers5791
7 жыл бұрын
Thanks so much this video helped me so much!!!!
@crimepays3019
4 жыл бұрын
Hey, RJ. I know you have a video on how to shop for bikes but do you have a video on how you turn bikes and what type of profits you make?
@RJTheBikeGuy
4 жыл бұрын
Sorry, I don't. I make money from the videos I do, more than flipping the bikes.
@crimepays3019
4 жыл бұрын
Ok. Thank you for responding.
@sweetdreems171
4 жыл бұрын
Tnx for the video. Good job.
@punktsup
9 жыл бұрын
very helpful but you can also replace all the parts? and the cups can be replace aswell? ty.
@RJTheBikeGuy
9 жыл бұрын
+kirtan samadhi Sure, you can replace the parts. But unless there is a problem with them, why? The cups are pressed in and can be removed and replaced.
@punktsup
9 жыл бұрын
cups is already rusty and i don't know if i can removed it i haven't try it yet to dismantle my bike, i got a mongoose sniper, same one piece crank like your bike.
@brianmiller5074
4 жыл бұрын
I finally landed a 1983 Schwinn Predator team 24 that I am looking to build. I am having the hardest time with the bottom bracket. Are all one piece cranks the same size in this era or what do I need to be looking for? The crank is a Takagi Cr Mo 175 mm one piece its attached to a competition Spider I think by Sugino and a 45 tooth sprocket. I am only finding 44 or 40 tooth sprockets, does one tooth make a real big difference? Any help out in the you tube world? Thanks and great video.
@RJTheBikeGuy
4 жыл бұрын
No. Nothing is all one size. You will have to research your specific parts and figure out what is compatible.
@georgiaguardian4696
7 жыл бұрын
Great video, thank you!
@brayanalvarenga3678
6 жыл бұрын
really nice video I really enjoy it
@XGaming1
4 жыл бұрын
I don’t have that part tool and I can’t get the bearing bolt off so my sprockets stuck on, how do I remove it without that tool your using
@RJTheBikeGuy
4 жыл бұрын
Figure it out. I have the tool.
@Fugitizm
4 жыл бұрын
Question for you sir...if the cup comes off do you put grease or glue
@RJTheBikeGuy
4 жыл бұрын
These cups are pressed in and additionally held in by the cranks themselves.
Пікірлер: 322