Your truck looks really great. That gray is the best color for the Ranger, IMO. I'm planning on getting one in a few months.
@rickdevries3111
2 жыл бұрын
we did the same with our Ranger, only we mounted 275/65-18 tires, and don't forget the alignment!
@factionfab5834
4 жыл бұрын
Thanks for the video and support, great job!
@SolaOutdoors
4 жыл бұрын
The pleasure is all ours! We were extremely impressed with the quality of both the lift kit and the wheel spacers. They definitely are leagues above what we had on our last project car!
@vrapnyc
3 жыл бұрын
Factionfab is the truth I have 2.5 level & 1.5 spacers on my ranger, great quality parts!
@Outdoors4adventure
4 жыл бұрын
Nice truck. I like the room of a truck over a sport utility for overlanding.
@SolaOutdoors
4 жыл бұрын
Thanks! We're definitely liking have the separation of our gear from the cab. A lot less clanking of pots and pans going down the road!
@Outdoors4adventure
4 жыл бұрын
@@SolaOutdoors Lots of room for the big slide out freezer to.
@SolaOutdoors
4 жыл бұрын
That's the next thing on our to-do list after we finish this bed rack video. Just gotta convince my wife that we need to swap out the ice chest for a freezer first
@Outdoors4adventure
4 жыл бұрын
@@SolaOutdoors I went with a 60 vl freezer and/or fridge with a slide that Iceco made for this freezer. We have used it several times with 200 watt solar breifcase and single battery. Of course when driving I charge this battery with my trailer hitch plug. It works great. The slide is a must have and I got the outer cover also. For the money I think its going to be great. It is so nice not having to worry about ice. I also take icecream with me...that alone is enough. Lol
@bricks-mortar
6 ай бұрын
TY. I trust Ford engineers. No modifications required.
@Eholla6
4 жыл бұрын
Great video. I like your footage and editing. Truck is coming along nicely. Also jealous of that shop space!
@SolaOutdoors
4 жыл бұрын
Thanks! We're really lucky to have access to the shop, especially since it's fully air conditioned!
@paulpeters5199
4 жыл бұрын
Awesome video I'm really thinking about getting wheel spacers for mine best move I've made couldn't be happier with it
@SolaOutdoors
4 жыл бұрын
They really do change the look of the truck for the better! We love ours and are super impressed with the quality
@paulpeters5199
4 жыл бұрын
So so glad you got the chrome package looks so much better than painted bumpers
@madisondeveer8244
4 жыл бұрын
Great video! Can’t wait to see what other mods are in store!
@SolaOutdoors
4 жыл бұрын
You and me both!
@mrmuskey5202
3 жыл бұрын
I was wondering about having it realigned. Your the first to mention it...
@SolaOutdoors
3 жыл бұрын
I'd say it's pretty crucial any time you lift or lower a vehicle to get it aligned. After this install, it was both toed in and cambered out quite heavily (5-8°out of spec)
@bryanheard1328
Жыл бұрын
Have you had any problems with your wheel spacers
@Cri11z
3 жыл бұрын
starts at 4:45
@patrickbreeze720
2 жыл бұрын
Hello there I watched this video and got psyched about doing this to my Ranger as well.. but then I saw alot of videos about "don't use spacers" etc. Others say the hubcentric spacers like you used are fine.. I don't want to void any warranty or anything by adding either of these.. what do you think? Thanks!
@sethgist3030
4 жыл бұрын
For someone that has a ranger. I went with the Eibach pro truck. The stock suspension is way too squishy off road.
@Davido50
2 жыл бұрын
I went w/Fox 2.0 kit. Great all around truck. Home run Ford!
@dickdiggler787
Жыл бұрын
Yeah... you will not get them back in without the CV joint separating. There is absolutely no way to get those extra long bolts back in without that happening. You have to push so far down on that lower control arm it's impossible not to separate it. I suggest you get a second person. It took me 4 hrs total doing it all alone.
@dnd1556
4 жыл бұрын
Great content and well-executed mate. I was wondering to do the same on my 2019 4X4 Ranger, so I've noticed you were talking about the FX4 suspensions, will just replacing the front suspensions with FX4 work?
@SolaOutdoors
4 жыл бұрын
Thanks, my guy! The front suspension on an FX4 is mainly just different struts and maybe different springs and would be a bolt on to any non FX4 truck. They're less stiff for more offroad comfort, which I can confirm rides pretty nice on a back road. They're not as nice as Bilsteins or any other purpose built shock, but it's better than the regular shocks that come on the truck. Since it's a bolt on swap, the lift kit works for either setup
@danielnunez7424
3 жыл бұрын
Beautiful job guys! Just what I was looking for! I already have the spacers on, I have a global Spec T8 2020 ranger. Would the 2.5” lift spacer work with the global version too?
@SolaOutdoors
3 жыл бұрын
That's a great question, I'm not exactly sure. I'd have to see if I can find the spring perch part numbers or maybe the bolt patterns to do some cross referencing. We will probably have the struts out later this month, so I can always measure it directly if need be
@Kcrudele5
Жыл бұрын
I wish there was a side by side comparison
@abnirvana996
3 жыл бұрын
Are those wheels the stock 18 inch or 17 inch wheels? Looks good.
@MCknowledge
3 ай бұрын
Do you need a alignment
@rjmurphy
4 жыл бұрын
awesome video! did you have any clearance issues with the existing wheel studs sticking out past the 1" wheel spacer and coming into contact with the back of the wheel?
@SolaOutdoors
4 жыл бұрын
We didn't have that issue with our chrome package wheels since they have the necessary pockets between the lug holes to accommodate the factory studs sticking out
@rjmurphy
4 жыл бұрын
@@SolaOutdoors cool! thanks for the info
@gdaddy6846
2 жыл бұрын
Was wanting to do this to my 2021 Lariat Ranger. Any cab noice like wind or rattling? My only worry
@briansbroncoadventura6899
3 жыл бұрын
Can you add a lift also after installing the leveling kit?
@matthew197735
3 жыл бұрын
I have 2020 ranger with the fx4 would i have to change anything to put 2.5 leveling kit or just that Pease on my truck cause i have people telling my i have to change out the upper control arm basically how high of a lift before i have to change other parts?
@dad3562
3 жыл бұрын
Is it required to hammer out the axle from the knuckle ?
@dad3562
3 жыл бұрын
It is, I recommend doing that. It worked great!
@Urias010
3 жыл бұрын
I’m getting this level kit installed on my 2020 ranger 2wd then going on a 16 hr road trip should I be good? Just want to make sure I don’t run into any issues on my trip
@SolaOutdoors
3 жыл бұрын
As long as they align it while they're in there, you shouldn't have any trouble! I usually recommend driving it for a couple days before a long trip like that, but as long as the shop is good then you shouldn't have any trouble
@Urias010
3 жыл бұрын
Is it safe to reuse the tierod nyloc nut once loosened?
@sangyi5569
2 жыл бұрын
Hey guys, I put the 2.5inch lifted front struts in my ranger. I dunno if I have to do wheel alignment or not. It seems fine but not sure.
@christophercsm32
2 жыл бұрын
Always do a front end alignment with a lift kit these guys inspired me a year ago I done a 3 inch SST lift and one and a half inch wheel spacers the fabtech spacers are really good quality
@shaylansingh5419
3 жыл бұрын
What about the lugs did the lugs have to be shoved down to fit the inch spacers
@SolaOutdoors
3 жыл бұрын
Not with our rims, they had pockets in the back face for the studs to sit. I have gotten reports of other rims not having these pockets
@abdullatifalrdaini8481
3 жыл бұрын
Thank's for the video. What is the size of the tires!?
@SolaOutdoors
3 жыл бұрын
Those are a 265/65R18 on the chrome package wheels. We've since upgraded to 285/75R16 on Method Wheels and they were a huge comfort increase off road
@wesleysproul5812
3 жыл бұрын
@@SolaOutdoors did you need to do any trimming for the new tires to clear?
@SolaOutdoors
3 жыл бұрын
@@wesleysproul5812 we had to remove the front and rear crash bars, but that was it for us. It did help that our new rims had +0 offset, but the biggest interference areas are the crash bars and the the steering knuckle
@wesleysproul5812
3 жыл бұрын
@@SolaOutdoors Thanks for the quick response. Was trying to find a tire size where the crash bars would not need to be removed, any suggestions?
@Ben1010Ten
8 ай бұрын
@@SolaOutdoorscurrently running the same size tires on stock 16" steelies with a 35mm wheel spacers, (+20) offset. Looking to throw on 25mm strut spacers for the 2" level up front. Hope the tires aren't too beefy for the lift until I can score some MT64's.
@Aceinfinity-le8zc
3 жыл бұрын
Did you have to cut the original stud when you put the spacers in ?
@JonBecker81
3 жыл бұрын
You use the original studs to hold the spacers on. The spacers has its own studs. If you’re going to use spacers then this type is the way to go.
@johnt6673
2 жыл бұрын
Lockers? Nope.. One locker... Ford should of brought a ranger to market with front and rear lockers and a decent lift on it.
@brandoncoe1666
4 жыл бұрын
Great video, but I have to ask, is the Grand Cherokee gone?
@SolaOutdoors
4 жыл бұрын
Unfortunately, yes we had to say goodbye to it. We reached the point where any further mods would cost a crazy amount of money for where we wanted to see it go, so we made the decision to start fresh on a platform that would be easier to fabricate our own equipment/have more aftermarket solutions available
@brandoncoe1666
4 жыл бұрын
@@SolaOutdoors As a Grand Cherokee owner myself I'm sad to see you go, but I do understand. Not that many people doing a whole lot to the WK2 platform. Im excited to see what you'll be doing to this vehicle
@SolaOutdoors
4 жыл бұрын
@@brandoncoe1666 it was definitely a bitter sweet transition for us. We put a lot of time and energy into the Grand, but it felt like we hit a brick wall with what we could do with it. It was super capable and surprised everyone watching it wheel, but in the end the need for getting a truck won out
@TroutWest
4 жыл бұрын
@@SolaOutdoors Curious what mods you feel you couldn't do to the wk2 without spending a crazy amount of money?
@SolaOutdoors
4 жыл бұрын
@@TroutWest I was really wanting to lift it higher, but it would have required a redesign of the front suspension. The price of bumpers for that platform is crazyand there wasn't a single set of them that I thought complimented the body lines just right. Plus I was really wanting to have a solid rear axle with a true locker, and that would have been a huge undertaking
@shaylansingh5419
3 жыл бұрын
Was there any trimming that needed to be done
@SolaOutdoors
3 жыл бұрын
Nope, no trimming required. If you want to stuff some 33s in there, you'll be taking the crash bars off
@TheSoonToBeTrucker
2 жыл бұрын
Locker drop the S
@razeastro4754
3 жыл бұрын
Think that a ranger with mods like these can fit 33s or 32s
@JonBecker81
3 жыл бұрын
32’s yes. 33’s you either need to cut the front intrusion bars off or get aftermarket ones like BDS has. It kind of sucks that Ford has limited us like that but I still love mine anyway.
@craighoyt125
3 жыл бұрын
Hey guys great video. My question is that you say " the only reason someone wouldnt do this mode, is if they dont have an FX4" I have a Sport model, but wanted to do this mod. What will the issue be? Will the front end then be higher than the rear? Sorry for the newbie question.. thank you
@SolaOutdoors
3 жыл бұрын
We probably could have worded that better, but what we meant by that was the shocks/struts on a non-FX4 are more tuned for on-road use. If you're planning on doing some off-roading, you'd likely want to upgrade your shocks while you're in there and get something like a Bilstein 5100 instead. If you're sticking mostly to pavement or not doing serious off-roading, this kit would net you the same 2.5" of lift in the front. I'd recommend measuring your fender height front and rear to make sure it would truly level you out
@craighoyt125
3 жыл бұрын
@@SolaOutdoors Thank you so much for the info! You guys are great!
@JonBecker81
3 жыл бұрын
@@craighoyt125 most people who have Fx4 and do off-roading usually upgrade their shocks too. Everyone complains about the Fx4 shocks for off-roading, especially when they have just a spacer leveling kit like this. Fox 2.0s are kind of the go to.
@zieske98
3 жыл бұрын
In the video it looks like the wheel studs are to long for the spacer.. I had to cut all mine off and I have 1.25 inch spacers. I had to cut bout 1/4 off every factory wheel stud
@SolaOutdoors
3 жыл бұрын
Do your wheels not have relief pockets on the backside of them? Ours did and sat over the studs with out any cutting of the factory studs
@zieske98
3 жыл бұрын
@@SolaOutdoors no
@shaylansingh5419
3 жыл бұрын
Can I get away with 2 in wheel spacers with this level kit
@banzaiib
3 жыл бұрын
6:59 i see you're an AVE fan, too
@pomponypelusa
4 жыл бұрын
Any Chrome is too much Chrome for a truck… remove it all right now and maybe...
@SolaOutdoors
4 жыл бұрын
I'm with you on that one, I've actually got some color matched vinyl to wrap the mirrors and door handles, then I'll be swapping out the wheels shortly after that. The bumpers are gonna be quite a project
@christophercsm32
3 жыл бұрын
Just buy a color matched truck no Chrome. Any Ford with with the Sport Pkg mid 90s up
@xernanjohnmaravilles8263
3 жыл бұрын
The thin guy talks too much.. We're interested in how it's done. Not your annoying talking.
@quehendricks
3 жыл бұрын
A spacer is NOT a lift
@JonBecker81
3 жыл бұрын
How so? There’s different types of lift. I guess since they didn’t do anything to the back it’s just a level but you can use spacers up front and blocks or shackles in the back to get a lift. It’s more form over function but still a lift. I personally would go with a suspension lift/level but not more than 3 inches. I think these trucks look stupid with a 6 inch lift.
Пікірлер: 84