Available at: www.lowbrowcus...
In this product overview video, Tyler walks you through the simple ways you can make this DIY Motorcycle Fender Mounting Strut Kit 2.0 work for you and your latest chopper or bobber project. Here at Lowbrow Customs we try and make your life a little easier by giving amazing solutions ready to weld and make your project look exceptional all why saving you time and money. Helping your fabrication needs but still allowing you to customize your motorcycle any way you want, with limitless options and combinations of our hundreds of bungs and tabs we have to offer.
We designed and made our DIY Fender Strut Kit many years ago and decided it was about time we offered an alternative style. Included with this kit are the following pieces:
(2) Oval, mild steel upper tabs, 1/4" thick, with 5/16"-18 threaded holes
(2) Mild steel upper tabs, 3/16" thick, with two 5/16" holes
(2) Lower mild steel tabs, 3/16" thick, with one 5/16" hole
(2) Pieces 1/2" thick Cold Rolled Steel, each 18" long
The oval tabs are designed to be welded to the side wall of a rear motorcycle fender. They can be welded inside the fender to keep them hidden, having first drilled holes for the hardware to pass through. The upper and lower strut tabs weld to the supplied 1/2" diameter, cold-rolled steel to make fender struts. Cut to length and bend (if desired) as needed. This entire setup gives a very strong, durable and reliable fender support. Using whatever style (hex head, button head allen, etc) 1/2" long hardware desired will secure the strut to the fender without having to put a nut to the inside. Alternatively, a slightly longer bolt and a half-thickness jam nut can be used (along with thread locker) for even more security. Everything included is mild steel, easy to weld, and Made in the USA!
Music
On My Own By Trent Thompson
Licensed by: Artlist.io
Негізгі бет Overview - DIY Motorcycle Fender Mounting Strut Kit 2.0 for Custom Hardtailed Choppers and Bobbers
No video
Пікірлер: 9