I've been using this pump for a month now. The only fix I did is enlarging the holes of the gaskets leading to the hose and gauge. The holes were so small that it "heals" during pumping. Now I am shooting papers.= )
@indraaccuracy352
9 ай бұрын
Is it can do more air to the tank, increase the air volume through?
@randolphcatchot5421
6 жыл бұрын
There was a severe mistake made @ around 2:28 , there should have been tape wrapped around those pipe threads before passing that fitting with the internal o-rings over them to avoid damage, once it's past the threads the tape can be removed...
@mehmetpehlivan4390
Жыл бұрын
Thank you. Supperrrr
@davidschmidt6013
3 жыл бұрын
FYI Not "installation"...what you are doing is "assembly". You're welcome!
@workouthollanda3438
5 жыл бұрын
This is a great pump, I have had mine for 3 years. However, the most inner tube must be screwed very tight to the foot. Way tighter than hand tight. Which is not easy unless you remove all oiliness. I wish Bull would come up with a better way to screw in this inner tube.
@chrisford9045
Жыл бұрын
Nothing wrong with the way that the inner tube screws in. Why don't you make yourself a tube spanner.
@keenanabhisoka8448
4 жыл бұрын
mang makasih ah,,,kenalkan jeme plimbang..au,,,pacak dengan....iluk ngan buat gawi..thanks very much
@anupamsamuelatyahoo
7 жыл бұрын
u can even use a very good quality (power break ) oil for lubricating the pump as it can withstand n does not vaporize when it reaches to high temperature while pumping
@davidferdian
7 жыл бұрын
For all, go to aliexpress.com and you can purchase the pump from there..paypal accepted
@gogle
6 жыл бұрын
is it stainless steel?
@nasirhusin3806
9 жыл бұрын
What type of lubrication oil do you apply during installation
@MrStevedore1
8 жыл бұрын
I use silicone oil.
@samrideris6482
5 жыл бұрын
saya dari malaysia,bagaimana saya mau oder pompa ni bro...
@MrEricdgreat
7 жыл бұрын
Where do you buy one here in Texas I am new to pcp air rifle
@eddieweaver6394
6 жыл бұрын
MrEricdgreat internet... ebay/amazon
@Excommunicado1945
2 жыл бұрын
Aliexpress
@agussupriyanto1332
5 жыл бұрын
Mau tanya kalooo pompa merek bul. Macet menggatasi ya gimana
@anismassangka7960
8 жыл бұрын
My pump vacuum at 1000 psi can not pull back......??
@MrStevedore1
8 жыл бұрын
Try to enlarge the hole of the white gasket at the base leading to the hose and gauge. I drilled mine with 2mm bit.
@huohailong5391
7 жыл бұрын
楼主可以给个淘宝连接?
@anismassangka7960
8 жыл бұрын
my bull pump vacum in 1000 psi ....
@boholairriflehobbies8518
4 жыл бұрын
Hm?
@kurirhappy6960
4 жыл бұрын
What price mr.
@Excommunicado1945
2 жыл бұрын
75 dollar in aliexpress
@joeldelacruz4583
7 жыл бұрын
sir im philippines wer i cane by dis bull pcp pump
@joeldelacruz4583
7 жыл бұрын
how much sir
@monogamer693
5 жыл бұрын
Manual pliss
@anismassangka7960
8 жыл бұрын
pull
@khadirunmas1507
5 жыл бұрын
pompa bul hagaya brpa bos
@bulangai9364
5 жыл бұрын
Pm bos
@himaxhartonohartono8829
6 жыл бұрын
Merek opo bos.berapa psi.rego piro...
@owenngadari9368
6 жыл бұрын
Himaxhartono Hartono mereke ontol gondel"😂
@spikes1529
8 жыл бұрын
Anyone had good experience with Chinese bull PCP pumps?
@MrStevedore1
8 жыл бұрын
I've got one. So far it is good pumping up to 3000 psi. Above that takes a lot of effort. Its fast to fill my 15" x 1.25" pcp tank though.
@workouthollanda3438
5 жыл бұрын
Yes, far better than the Hill pump or any other European pump! I own a hill too and it is poor quality compared to the Bull.
Пікірлер: 37