Ruger, please bring the P Series back. I for one, gave up a P 90 years ago and regretted it. Recently found one and put it on layaway. I come across P 89's on rare occasions. Law Enforcement and Corrections used them in my area years ago. More than one person has told me how much they enjoyed those P Series. Bring them back.
@shadowcous
8 күн бұрын
Amen! I had a p89 in 2015, but sold it to help my mom pay the bills, since dad was a piece of shit and would barely help with child support. I regret selling that gun to this very day. If I could go back, I’d have sold a different one.
@captaincodebook3200
4 жыл бұрын
Wish I still had mine. RETRO RUN !! PLEASE !! Or maybe a polymer run. Glock P80 needs a challenger.
@jeroendesterke9739
2 ай бұрын
This is the THIRD clip on YT which explains a different manner in removing and assembling the slide onto the frame. I wonder is any of the makers of these clips - including this one - has any clue as to HOW to present any kind of tutorial?
@unclepeteknows6217
5 жыл бұрын
Bad video. You forgot to mention that you must also line up the small take down notch (on the slide) with the rear part of the slide stop, in order to pull out the slide stop. This step is critical. Otherwise the P89 cannot be disassembled.
@ryanestes8380
4 жыл бұрын
Uncle Pete Knows! Thanks for that info. First time cleaning mine and couldn’t figure out and was getting frustrated.
@blakedavis2447
4 жыл бұрын
So I did that and now I’m scared
@FrankGreenway
3 жыл бұрын
I still can’t get mine to slide off. What gives?
@georgeb6152
6 жыл бұрын
Do not make the mistake like I did today on the Ruger P-85 on reassembly by positioning the guide rod and spring on the little nipple when shoving it back into position. (The slide will then not go back into position fully, and the guide rod will stick out about 1/8 of an inch in the front of the pistol). The spring and guide rod must set on the loop and just above the nipple. Be sure the nipple on the barrel loop is rotated in the full down position. Did I waste some time.
@tlrkessler
2 жыл бұрын
Hello, I received a p-85 today stuck at half battery. The slide will not move, looks like guide rod is sticking out further than the barrel. How did you disassemble to correct this problem? Thanks
@djelliott8041
10 ай бұрын
I did the same thing had to take it apart with one in the chamber.. talk about nerve racking
@stn321
13 жыл бұрын
good gun.....good review
@FrankGreenway
3 жыл бұрын
Good video and thanks
@stanleyfuentes5897
2 жыл бұрын
Sirve de mucho☑️🆒
@interstatedriver3163
7 жыл бұрын
Texas coaster 92: just simply REVERSE the steps of disassembly
@МатвейМалинин-щ4ф
Жыл бұрын
Непопулярный почему-то.
@rxfire2437
3 жыл бұрын
Boy, there's a guy who never got to school with his lunch money.
@Gamer_Triztan01
3 жыл бұрын
Thia didnt help at all
@jsanders299
7 жыл бұрын
Mostly propaganda. I really wish people would use the correct terminology when labeling videos. THIS is field stripping, NOT disassembly. It makes it hard to search for something when everyone labels everything incorrectly. #wordsmatter
@frankwhite8235
7 жыл бұрын
J Sanders when they take your car apart do they call it field stripping?
@earldoddjr7008
Жыл бұрын
A
@Ambiguous1981
4 күн бұрын
Nerd
@fistymopar2356
5 жыл бұрын
Bad gun, bad review..... ruger is built for Chevy guys, junk. Stick to revolvers, at least those work. Not helpful, must have forgotten a few key points.
@stn321
4 жыл бұрын
Pre 2000's Ruger handguns were some of the best ever made, I've put 2000 rounds through mine without a single malfunction, I'll also take 15+1 over a six shooter any day
Пікірлер: 24