1. Yep, I’ve gotten two different copies from two different places a month apart, and both have identical issues. One of them was directly from Hasbro, so no I did not accidentally buy a stolen copy. 2. If you like your figure, honestly that’s great for you! You win for enjoying something I don’t, because I wish I liked it. 3. In advance for anyone who’s prepared to comment “he’s innacurate because he’s based on concept art” as a defense. This is the same thing I’ve told dozens of people who use that same tired argument, so don’t take it personally: I. don’t. care. 😂 It’s a studio series figure, and the #1 point of studio series is to be accurate to the movie, not the concept art. If they had to wait a few more months to start working on it in order to make him 5x more accurate, they should have. The mainline is for figures based on concept art, NOT studio series. Thanks for watching guys!
@iforgor8271
Жыл бұрын
It’s still a good even if a tad inaccurate
@Treestump7271
Жыл бұрын
It’s just disappointing that they used concept art instead of waiting for the finalized design because the actual figure looks perfect compared to the concept art I do hope that the studio series figures release later so they’re more accurate
@Refrigerator._.
Жыл бұрын
@@iforgor8271hes very far from it, no reptile neck, smaller and chunkier shoulder pads, too skinny and only accurate thing is blade truck mode from front and head(not neck)
@ZoffyAyanamide
Жыл бұрын
i completely agree, id rather this abomination get released in the mainline and wait for a proper studio series version that looks accurate to the scourge we saw
@papermelon
Жыл бұрын
@@iforgor8271 glad you like him, but that’s not my opinion lol. I don’t like it for that reason and all the others listed in the video.
@GM-12
Жыл бұрын
The head popping of is actually a play feature
@papermelon
Жыл бұрын
😂😂
@Jason49110
Жыл бұрын
It's accurate to the movie
@teab0244
Жыл бұрын
LMAOOOOOOO that’s good 😂
@LiamDyC
Жыл бұрын
@@Jason49110 "Time to show you the real POWER OF A PRIME!"
@SiFiGamer2016
Жыл бұрын
Yeah, that makes sense. 😆
@snappy_the_autobot.
Жыл бұрын
I paid over 50 bucks AND THIS MF HAD THE AUDACITY TO SNAP IN HALF
@infinitylord1524
Жыл бұрын
Oh no😂
@myang12003
Жыл бұрын
I’m glad I didn’t waste my money on this
@filipbabic4913
Жыл бұрын
"TIME TO SHOW YOU THE REAL POWER OF A PRIME!"
@user-gj6wn7hc3w
5 ай бұрын
Your poor wallet 😢
@whoelsebutmeofcoursei
Жыл бұрын
Most depressing leg transformation phase ever
@ratman136
11 ай бұрын
*SS TF4 Galvatron laughing right now*
@glitchknight409
8 ай бұрын
*SS rotb bumblebee laughing maniacally*
@ratman136
8 ай бұрын
@@glitchknight409 also ss38, who else??
@great159
6 ай бұрын
@@ratman136SS102 is WAY worse than SS38. They ran out of budget money when they got to Prime's legs (seriously no joke.) His truck mode looks horrible. SS38 did it better💯
@_V.Va_
5 ай бұрын
@@great159It did truck bed better but robot mode legs worse.
@thekilljoy2919
Жыл бұрын
Actually, to all the people saying he was based on concept art, technically, Scourge was not. The intended release date for Rise of the Beasts was going to be June 24th of 2022, with the mainline toys coinciding with the movie’s release, and the SS coming out in 2023. This was supposed to be the final design for Scourge, used throughout the test screenings and changed only after it was delayed. However, the release dates of the SS toys were not pushed back, since they were already finished, and we got a jumbled release of inaccurate figures. Because of this, we’re stuck with the version of Scourge that would’ve been, not what we got. Airrazor faced the same fate, and it’s a shame that we weren’t able to get the best versions of the characters. TL;DR we were this close Joe Hasbro
@bryanmerel
Жыл бұрын
This is why we better of wait for the Better Takara version. On a side note, maybe lets wait for 3rd party to give us a Better Figure. 🤣
@Equalsundew
Жыл бұрын
So still, concept art got it.
@oochielane5832
Жыл бұрын
@@bryanmerel Takara is just gonna give us a premium finish and that's it. Don't expect a full retool
@bryanmerel
Жыл бұрын
@oochielane5832 tell that to their better mold of Age of Extinction Evasion Prime.
@BlitzStudiosIsinsideyourhome
Жыл бұрын
@@EqualsundewIt’s not concept art if it actually appeared on screen, It’s called an early design
@Refrigerator._.
Жыл бұрын
Funny how night bird looked like a mess with a clunky backpack and horrible paint, but it turned out to be good and scourge looked cool and turned out to be disappointing
@papermelon
Жыл бұрын
Exactly my thoughts
@Blackw1ng
Жыл бұрын
@@papermelonMy only gripe is that they both look like theyve never heard of leg day😭 Meanwhile OP and Mirage thick af with Bee being king calves
@Blackw1ng
Жыл бұрын
@Wesitos_Takanashi it's the huge torsos that makes the skinny legs look weird 😭 Throws everything out of proportion
@blue-vr8dd
Жыл бұрын
icl I don't even think this fig looks cool. maybe 3rd party TF has ruined my standards lmao
@tomjames9681
Жыл бұрын
I wasn’t expecting a 6.5 after all that. This guy, with all those problems, barely meets average, which is a 5/10
@papermelon
Жыл бұрын
Yeah I actually agree lol. In the full review on my channel I went back in post production and added a segment where I changed the score to a 6 instead of 6.5. As time goes on since posting it might be down to a 5.5, but I wouldn’t go lower since he’s still somewhat fun to mess around with and there’s way worse figures out there 😂
@TFRO_madRobots
Жыл бұрын
From more than meets the eye to barely meets the eye
@etonymous1632
Жыл бұрын
About the clear plastic: if your copy was a pre production sample then most likely that’s the reason why it snapped so easily. My copy may have a bit of a stress mark but I can’t see it snapping any time soon. It does kinda scare me to transform it but it won’t break as long as I do it slowly and carefully
@SilentSniperF19
Жыл бұрын
I’m not scared of transforming scourge bc I have done it over a 100 times and no breakages
@soundwavesuperiorconstruct4627
Жыл бұрын
@@SilentSniperF19same
@soundwavesuperiorconstruct4627
Жыл бұрын
@@SilentSniperF19its a pain popping his tires out it hurts
@SilentSniperF19
Жыл бұрын
@@soundwavesuperiorconstruct4627 that I can agree on
@linkimusprimeproductions7890
Жыл бұрын
Nah mine is a final copy and the orange plastic on the roof is cracked. It's not early samples, it's bad plastic quality
@elsierivera6865
Жыл бұрын
It’s a good figure but same for me the smoke stack is so loose
@cheesemoon6319
Жыл бұрын
For a leader class figure, the leg transformation is a joke.
@yerriff8115
7 ай бұрын
All of the "x class" toys have joke transformations these days. Only MPM get actually interesting engineering
@RocketCyrus
Жыл бұрын
Kinda decided to hold off on buying SS Scourge since this didn't have his damaged/real face like in the movie. Hasbro already made SS Fallen with his torn "skeleton" face, so I kinda wished they did the same for Scourge.
@ignite5329
Жыл бұрын
ím holding off on SS scourge for either the yolopark one or a new SS scourge since this one is so completly diffrent from his movie look
@RocketCyrus
Жыл бұрын
@@ignite5329 Yeah I get ya
@bantuboi3131
Жыл бұрын
I got the upgrade set that includes a new head and armor pieces.
@ju87d-3stuka7
Жыл бұрын
I'm going to buy that ThreeZero Scourge, and probably all of the ThreeZero ROTB figures. The Studio Series ROTB figures don't look good and I really liked Scourge so I would like to have the best model of Scourge that I can get.
@GabrielIgnacio
Жыл бұрын
Scourge is the second SS figure I’ve purchased where I’ve had to purchase a second copy to keep in truck mode exclusively as that clear plastic, despite being thick, did crack quite a bit on my first copy that I’ve transformed twice. Nothing’s snapped off yet but it will happen I’m sure since clear plastic will clear plastic and all that. Only other one is SS49, or technically that as it was from the 15th anniversary autobot 5-pack with the chad head and I purchased the DotM bee to replace it as the tooling was a lot better compared to the previous ones.
@DrunkRockstar7
Жыл бұрын
I paid $60 for his smoke stack to be loose but I still love the figure
@etonymous1632
Жыл бұрын
Is this overrated? Yes. It was a bit disappointing. Is it still a great figure in my opinion? Yes
@papermelon
Жыл бұрын
Glad you love him! I wish I did. Sadly I can’t stand mine 😂
@etonymous1632
Жыл бұрын
@@papermelon like I’ve said, my copy doesn’t have most of the issues yours does. The smokestacks may be a little bit loose but nowhere near as floppy as yours. I don’t care about hollow bits bc they don’t seem very prominent, and the movie accurate weapon storage makes the back look a lot better (he IS too skinny however and the shoulders/ head/ claw is not accurate, which is sad
@bluefrequencytv1073
Жыл бұрын
I feel like from the waist up (minus the neck) the figure looks good, but the legs do not match with the rest of the figure at all. It feels like they were on route to something really cool, and then they just called it a day. This had potential to be one of the best Studio Series figures from the Rise of the Beasts line.
@teab0244
Жыл бұрын
The clear plastic on mine cracked too. I sanded the hexagonal edges on the hinge and it moves fine now. I think the issue is just too sharp of corners to move along.
@soundbot29thequantumbot16
Жыл бұрын
I love this figure even tho he has flaws, I'm still loving that figure got him on my B day
@etonymous1632
11 ай бұрын
That dna design kit is gonna make him looks a million times better
@samurexatlas7373
Жыл бұрын
It feels like they ran out of budget. Maybe if he would be Commander Class, like the upcoming Magnus, they could fix a whole lot more.
@aperson8209
Жыл бұрын
my figure is perfect but it is very inaccurate but hopefully a dna design upgrade kit comes out and fixes the head and shoulders
@ConfusedCrowBar
Жыл бұрын
I cant wait for DNA kit to come out
@samueladams2241
Жыл бұрын
We need a 3rd party mpm version or a oversized ss version that has the additions and fixes to give him the powerful dark energy god he is
@vaporRex
Жыл бұрын
My scourge that I payed a lot like almost $60 it already has stress marks from the clear plastic on the back 😭 I stopped transforming him more since then
@ashleyva1461
Жыл бұрын
I didn't get any of these issues with my Scourge, sorry to hear you're having them 😭
@lincolnbeckett8791
Жыл бұрын
Of COURSE this video gets recommended to me AFTER I bought mines 😭
@papermelon
Жыл бұрын
Haha plenty of people seem to love him, so maybe you will too 🤷🏼♂️
@wingsoffireguy1963
Жыл бұрын
I liked him at first, enough to give him a custom paint job but after the movie he’s just inaccurate and I wish they just did better with him, on this toy specifically breakages are way too common, mine broke and I’ve heard of a lot of other breakages, idk what we would do to get an accurate scourge now, the yolopark looks great but it doesn’t transform
@ConfusedCrowBar
Жыл бұрын
Yeah mine broke too. but for some reason nobody else besides this video has talked about it. Glad you said something too. he’s so expensive
@Cheezy006
4 ай бұрын
Mine (which I’ve had for pretty much a year now) the clear plastic snapped in the exact same spot, I’m annoyed but glad it’s not the actual hinge and just the part that makes it “thoop” into place, lucky on mine the hinge is tight enough and it pegged into the back securely that the detents in the hinge was kind of unnecessary.
@a_literal_brick
Жыл бұрын
Also, the light piping. There's a lot of it, but it doesn't connect in a way that lets a lot of light through. It feels like this figure must have been based on some earlier draft of his character design because the proportions just don't match what's on screen. Especially with that giraffe neck and tiny head. I still don't regret getting him because it will probably be a decade or more before we get a better mainline version, but I just wish he was better.
@LordVader-vd1pi
Ай бұрын
Mine didn’t really have all these qc issues, but with the DK upgrade kit (which I got) he’s a lot better except for the arm tab popping out a lot
@great159
6 ай бұрын
If Hasbro is wise they will release mainline movie figures with the movies and Studio Series AFTER the movie so we don't have concept/inaccurate figures like Scourge and Mirage🤓💯
@Sp00kyBones
Жыл бұрын
As much as I love this figure, a portion of the grill snapped as soon as I Transformed it for the first time. As for the design being based on Concept Art, Scourge was never *That* thin, even in concept art. Still though, definitely a fun figure for me overall, can't wait for the upgrade kit.
@DeadstreaK_
2 ай бұрын
I don’t know if you’ll read this comment but Baiwei just released their KO SS Scourge and from what I’ve seen, they basically fix everything wrong with the figure. They used screws for the smokestacks, thiccened the thighs, gave him movie accurate feet (with die cast foot bridge strut things), a much better head sculpt, and an articulated claw, among other things. All that for around 25 bucks on show z. I got him coming on the way with both DNA Design 46 and 49 upgrade kits. 49 basically completely changes his shoulder transformation to give him movie accurate shoulders btw. (And I’m aware that not everything on 46 is going to fit on this KO since it was intended for the original figure)
@micosanchez9382
Жыл бұрын
Just wait for bmb or wei jang to fix the problem 😆
@_dtayylor
Жыл бұрын
There’s an upgrade kit floating around that gives him a movie accurate head, fills out the gaps, and makes him look a lot beefier than he does stock, and you can still transform him with everything on, that’s the only way I would ever buy this figure, if you want a leader, get primal
@tcogproductions
Жыл бұрын
I completely respect your opinons but i would like to point out some things. Please keep in mind this is from my experience and knowledge i have 1. The smokestacks is a very common issue. Definitely QC, but imo very minor nitpick. I fixed it with some sticky tack. Yes its a leader class. No it shouldent happen but this is what we have to deal with since nothing is perfect. 2. That specific hinge is commonly known to pop off on factory rejects. In your pinned comment you said you did not buy a stolen copy. There are no known reports of this happening on regulated figures. I feel it somehow got past QC. 3. Yes it's studio series. I agree that it doesnt match. It should. Then again when this figure was made, this was the final design, and the movie was set to be released *last* year. I dont really mind that in that case. but this depends on preference. Personally i prefer a concept art focused good (imo) figure other than wait a good year maybe two (bc that's how long somtimes longer to design a figure) to get a proper scourge. Im sure in the future this will be fixed. 4. Where exactly is he "hollow". With hasbros budget getting smaller we must expect this kind of waffeling. If you are talking about inside his chest then that is past nitpicky. You dont even see inside his chest and his head goes there. 5. Skinny is his design. Hes meant to look agile. Is you are saying he is too skinny, then we are going back to the concept art. 6. The legs. I have not seen your channel before so I do not know how much of a tf fan you are but leg transformation are pretty simple not due to budget. It personally satisfys me but if it doesn't for you, remever his gun can transform to become a real world *accurate* truck bed. Imo this is the best truck bed we have gotten since ss38. I mean have you seen ss galvatron??!! 7. How can you expect his arm to have *that* much articulation. This is leader class! This guy is huge! His budget is well placed. Would you want them to sacrifice somthing just to have that articulation. Remember we just started getting articulated hands. That was standered for masterpiece, not mainline. 8. I understand the head. Same issue on virtually every other copy. Mine came with the head popped off. That shouldnt be the case. Thats a hasbro L. 9. The arm loosness can be fixed with a screwdriver. I wouldnt blame that on Hasbro. Your figure loosens with time so dont blame that on hasbro. 10. I would like you to define the "he doesn't deserve the leader price point" i agreee. I wouldn't mine paying more to get a slightly better figure. But if you mean he is worth less, the all i have to say is seriously?? You want a worse figure at a voyager price point? Kinda shocking imo I really hope this didnt sound stuck up, but it kinda bugged me how much you are complaining about minor things. Again i havenet looked at your channel yet but if you are a new transformers fan maybe take a look at the standered of studio series releases. They are VERY hit or miss. This guy is very good for that line imo.
@papermelon
Жыл бұрын
I appreciate you being respectful about the disagreements man. The funny thing is you’ve admitted to agreeing with 90% of everything I complained about the figure, but you still think I’m being nitpicky 😂. In most of your points, you basically said “what you said about ____ is completely true…but I don’t care”. To answer your question, yes I know Hasbro and their SS line very well. I own virtually every single Studio Series figure, and I’ve collected transformers for 16 years. I generally love Hasbro and what they make, but this figure failed to uphold their typical standards in design and QC. I have very realistic expectations for Hasbro, but I feel that people like you will let anything pass because your expectations are so low. And even if you think the SS line is hit or miss, that doesn’t suddenly justify them producing bad quality now. If everyone believed that, we’d only get trash figures and it seems like plenty of fans would eat it up lol. At the end of the day, my complaints were not minor, because they all add up to making a very negative experience. I owned 2 copies, and both had identical issues. A breakage is a breakage. Loose joints are loose joints. Lazy engineering is lazy engineering. An inaccurate design is an inaccurate design. And so on… Not sure if you’ve seen the movie, but he is absolutely not skinny lol. He’s a beefcake. And yes, it is 10000% Hasbro’s responsibility to make sure their figure’s arms and joints aren’t loose.
@tcogproductions
Жыл бұрын
@@papermelon wow that's really cool! Another avid transformers fan is really cool. I have seen the movie but it think the most they could do would be to bulk out the wheels. Idk. I agree QC is a horrible thing now that's gotten way out of hand. Reading your message really makes me realize how normalized it is now and that shouldn't be the case. For a multimillion dollar company this shouldn't be a widespread issue. But allas here we are. We are still buying the product and Hasbro won't do anything about it. Btw idk if you know this but Hasbro has GREAT customer service. If you email them your issues with pictures they will send you a replacement. If they dont have it in stock they will send you something that's the same price that they do have
@Jellokop
6 ай бұрын
I feel your pain but if I want to make the purchase u can buy a upgrade kit to fix at least most of the issues but the loose and broken will not be issued in the upgrade kit
@CREA9TURE
Жыл бұрын
Just wait til Wei Jiang makes an KO version.
@racconguy8423
11 ай бұрын
BMB already had production samples for KO SS 102 and I think they gonna do the same for Scourge anytime soon
@pilotraptor64
Жыл бұрын
This is why I sold my ss scourge and i'm waiting for the yolopark one to release.
@papermelon
Жыл бұрын
Can't freakin wait for Yolopark's 👀
@vuilnisgod4388
Жыл бұрын
“There’s only one beer left, Autobots screaming in our ears like we’re deaf”
@heavenlyderpfowl1180
5 ай бұрын
Also knock a point off for the only way you can get him at retail is if somebody with target reor whatever returns him, he ends up on the shelf, and you scan another leader with him
@skybytebytes
Жыл бұрын
We might get another one from the SS line tbh since he has that cybertronian mode in the movie
@spawnytheistic
10 ай бұрын
It sucks because I’m collecting all of the ROTB cast but I’m just really not feeling him. Especially the prices he’s going for nowadays. Let’s be honest, we’re all buying that upgrade kit anyway. Huge mixed bag.
@papermelon
10 ай бұрын
Yeah the upgrade kit is a must, but turns this into a $100 figure. Simply not worth that.
@snarledsphinx628
Жыл бұрын
Hope we a third party figure in scale with studio series
@gleamingcolt
Жыл бұрын
I would like to see a SS Scourge 2.0, just for some more screen accuracy
@treebotreviews
Жыл бұрын
Man me and you land so differently on the SS Rotb figures and I’m glad cuz it’s giving me good perspectives!! I had scourge as my second favorite from bumblebee. I do see the problems you have though! Also I gotta give scourge credit for not using any cheats in robot mode. Besides maybe a couple details on the arms, all the crucial stuff ends up in the right place on both modes.
@papermelon
Жыл бұрын
Cool to hear your thoughts man! Glad you like the figure, I wish I did. I think if everyone agreed on every figure it'd be pretty boring, so good on you for being chill about it
@treebotreviews
Жыл бұрын
@@papermelon yeah man! I’m very glad I stumbled upon you. You’re hella inspiring to make my videos better!
@Mtronleaderofdisassemblycons
Жыл бұрын
Well on my copy of the toy the smokestacks are fairy strong maybe too strong but not too much strong for being stuck there in one place
@TheEduardo90
Ай бұрын
The best option available at the moment is Baiwei Scourge...no transparent plastic used,plus it comes already with DNA upgrade kit
@IanFraser420
Жыл бұрын
I actually figured out what was up with that hinge that everyone’s snapping. It’s due to mistransformation. That hinge is only supposed to fold inward to form the cab of the truck. However, everyone seems to be folding it outward for some reason, which breaks it because it was not designed to go that far out.
@aKaGT
Жыл бұрын
Scourge looked amazing in the movie but the only thing I don’t like about his figure is that his neck is way to big and doesn’t really look like how it does in the movie. Anyways it’s a pretty good figure.
@darknerd8332
Жыл бұрын
Honestly I feel like the quality of the recent studio series figures have been disappointing compared to when it first released its first ever wave. To be fair to this figure, it was made based on concept art and very dark shots of Scourge from the trailers so it not being accurate (especially the head and torso) is understandable. But honestly, Scourge is a figure they HAVE to make a re-release for.
@tavinprice2310
Жыл бұрын
I mean, I liked the figure, and after putting LEDs in the chest and head (I use a wireless LED stand) it's way cooler, BUT I would like for them to redo this figure
@kerry1979
Жыл бұрын
Just use resin casting & add paint into the mix that matches it. To fill in the gaps. What I did with my GI Joe Megatron hiss tank. I filled up the cannon.. With Black resin. Wiped ff the residue with exacto knife. & good as fixed.
@Tony_Kim_
11 ай бұрын
I'm planning to buy upgrade kit from Nova Forge at some point. It improves a bit of alt mode volume and fixes damn concept face as well.
@hjonk9858
4 ай бұрын
Honestly I think you’re right. I was so hyped for this figure and I got it and I loved it. But then I discovered the yolopark model. Much better proportions, crisp detail, and great articulation. So I consigned the SS figure to vehicle mode, because with the gun arm covering the emptiness of the truck bed, it’s still a nice truck.
@gtortillaz21
Жыл бұрын
One thing I wish they'd done was given an alternate hand for the left arm, that big claw hand sucks
@JazzyLad-tq8yp
7 ай бұрын
I bought him yesterday and I actually really like him. I do like how the head has the long mustache like the g1 design, but the only thing I don’t like about him is also the exhaust pipes on his left side. Is there any way to make them tighter?
@papermelon
7 ай бұрын
I tried floor polish, rubber bands, zip ties and twisty ties. nothing worked that didn't look ridiculous for me, so it just hangs down 🫤 sorry. glad you like him otherwise though!
@karontheone1067
Жыл бұрын
Bro looks like he is from Armored Core Verdict Day 💀
@Atlasrylee
Жыл бұрын
I loved scourge as a villian and i got this as a birthday gift the sword is cool asf and hes actually in my hand rn but my only problem is the balance on him its just terrible
@Kids_Scissors
Жыл бұрын
Its just a shame that a Terrorcon with an MF Doom mask got so unfairly shafted when it came to his Studio Series release
@elrioter4191
Жыл бұрын
In my country, he costs well over 65 USD. I like the design of the toy more than the final look, but yeah, he's far too insubstantial to be worth the price, even though my copy doesn't suffer from breakages.
@brianeves
6 ай бұрын
The smokestack was pretty loose that sucked but thankfully I used tape
@Turbo.RF4
Жыл бұрын
hopefully, they would do a 2.0 version, im fine with them doing it again with a more accurate screen look, this version of scourge deserves every piece of merch that would do him justice.
@Average_Scorpion_Enjoyer
Жыл бұрын
I bought him a couple months ago just after seeing the movie, literally the day after, and I was really disappointed with like the exact same stuff, I don’t have the same problem with the left smoke stack but I do have a problem with all of them, they’ll just pop out sometimes, and same with his head they won’t make a sound and when I look back at him he’ll be missing a smoke stack or be headless, or both
@papermelon
Жыл бұрын
That's tough man, sorry to hear that!
@ashleyroberts2294
Жыл бұрын
I’d heard that he wasn’t designed off concept art but the actual model for the film but they changed the design last minute along with other changes but they’d already started mass production of the figure and was too late to change it. I don’t know how much of that is true or just rumour
@TheWhovinerd-1963
Жыл бұрын
I think it’s a case of your mileage may vary on the majority of videos, posts etc that I have seen their copies of scourge were absolutely fine. For me personally I keep my transformers in robot mode anyway so the truck doesn’t bug me that much as we literally only see it in the movie in two scenes. I don’t mind it not being completely accurate because, it’s a figure that can transform into a truck, there’s going to be at least some kibble. I don’t agree that he’s too skinny as in the movie he is actually a very slender bot compared to bots like Battletrap and Optimus Primal. I do however, agree that he doesn’t deserve the leader class price point. I personally would have loved to have seen more logos on the arms like in the movie and an alternate regular hand to justify the price point. Overall I’m going to pick him up. Xx
@dr-arm
Жыл бұрын
Around what price would you recommend for this guy? I want to get back into collecting movie figures due to rotb, or should i just wait for the yolopark model kit?
@Carpediem357
Жыл бұрын
I haven’t been in the Transformers SS collecting scene for a few years but coming back and seeing all the new SS toys being so bad is depressing and has made me think of how far SS has fallen off. I remember Hasbro saying it was movie accurate entirely: color, design, height (I still don’t know why they said that) everything. Scourge is probably a remold of mainline AOE Galvatron from Wave 2 voyager class
@Spoderman-ur8gx
8 ай бұрын
Get the upgrade kits I heard they help with the head issue we just need one for the backpack problem
@thetxaggie6575
6 ай бұрын
I pre-ordered both DNA Design kits and they will be a huge improvement
@itstrashboi4142
2 ай бұрын
completely missed the leader class called at the beginning and was thinking "I mean I've seen worse deluxe figures"
@muhammadsyam1202
Жыл бұрын
Finally.. A honest reviewer..
@Fallout_Survivor
Жыл бұрын
The car mode looks fine, but that IS NOT Scourge looks like more like a generic decepticon lol
@S0M3GUY778
Жыл бұрын
The toy was designed off of concept art for Scourge, but I'm willing to wait for a more accurate toy Scourge, third party oor not
@hyperhydra9042
3 ай бұрын
I believe the name is yolocraft, but they sell a scourge figure that looks so much better. Only gripes is he’s a little too metallic and can’t transform but I like him
@returnedtomonkey8886
Жыл бұрын
Man am I glad I couldn't find him when I went in italy. But i did find a kingdom rattrap. He is pretty cool for a such a small guy.
@safdgsddsef
Жыл бұрын
this is why Hasbro should wait until the movie comes out then make the figures the best it can
@sojungsutton786
Жыл бұрын
I agree
@yusifer5719
Жыл бұрын
Well that was the original plan, but then the movie was delayed a year, designs were reworked and hasbro had already sunk too many costs into the SS ROTB stuff to scrap em and start over
@safdgsddsef
Жыл бұрын
@@yusifer5719 I didn't know that thanks for telling me
@elbashar7589
Жыл бұрын
I'll wait till an oversized KO version shows up. Since I prefer to buy from third parties at this point, Hasbros track record for Quality has kind of degraded exponentially. I like additional tooling, resculpts, diecast, additional aspects that complement the transformation.
@donotfollowmefollowofficia5
Жыл бұрын
I had a problem very similar with the pipes but if you put something like glue but not strong glue and it should be fixed at least that’s what my pal said he done for me
@just_a_rapperjetblack9556
Жыл бұрын
Sad to see they don’t put as much love into their craft as they did back than….
@gojiformers6277
6 ай бұрын
Thinking if you think about it it’s kind of hard to make a character like scourge that is so skin into an actual transforming figure
@ScorpioGamer-se3ul
Жыл бұрын
Someone needs to make 3d printed exact copy of the legs but with a long tile above the tires and it folds in and you can make it less hollow
@mahmoudelomari6107
7 ай бұрын
I agree with u about this figure except I don’t find him too hollow, but I get where ur getting at, he’s actually one of my only transformers within the past few years to have some weight, I got grimlock ss 07 and Grindor but Grindor has less weight than both of the other two somehow and he becomes this gigantic helicopter toy
@lsv4898
7 ай бұрын
I've gotten a 40 dollar KO and it seems to be higher quality than scourge from hasbro themselves. Only issues are the hinge on the chest cracking slowly and the right arm not being very stable and tight.
@TheOnlyBlackInMeWasWillieBrown
Жыл бұрын
As a 90s kid that grew up with Gen 2/recolor Gen 1 Transformers. They were fare superior toys despite the articulation that the need ones have.
@treofficial1639
Жыл бұрын
This is why I’m waiting for the AMK Yolopark Scourge Figure to release
@The_Barroth
Жыл бұрын
Wondering if they’re gonna go back and do it again like how they changed the voyager bayformers prime mold Same character, different figure, different backdrop In the meantime, I got some third party upgrades to make him accurate
@briximusprime
Жыл бұрын
Mine thankfully didn’t have this many problems, I did have the loose smokestack, and I agree with the truck bed issue, but I liked him more than 6.5
@CyberKnightMiky
Жыл бұрын
All I can say is that it's true, but I'd also say the delay really messed the production up allot. All I do know that there's going to be a Yolopark figure that'll be more accurate to the model, and be around 30 dollars. Sure it may not transform... but Scourge barely even transform much. Either way, do respect your statement and opinion
@papermelon
Жыл бұрын
I’m pumped for Yolopark’s version
@Toxic--YT
8 ай бұрын
Paper Melon that studio seirs scourge was a concept figure and there is a upgrade kit avalible to make more screen accurate and there are panles to make it less skinny and fillers to fill in the hollow areas
@Toxic--YT
8 ай бұрын
and there is the another upgrade kit avalible
@Toxic--YT
8 ай бұрын
the upgrade kit is called dk-46 and dk-49 they are different but if you combin them they look more screen accurate to the movie
@hthrun
2 ай бұрын
I'm waiting for an mpm or for an osko with the upgrade kits built in.
@scxr2789
Жыл бұрын
Aside from the smokestacks, loose blade, and easily pop off head, my copy didn't have any other issues
@halo_happened77
Жыл бұрын
Dude the head on my copy doesn't even stay on and same problem with back pack. Huge let down for me 😔
@bigrodent-kingofRNG9931
Жыл бұрын
Btw the gap is there for the core class freezer to go in
@matteomascaropennacchi2220
Жыл бұрын
+ his shoulders arent exactly the 1s of Rotb movie, wich these shoulder have Faction medalhas on it!
@digitalexordium4763
Жыл бұрын
They need to make a re-release of some of these studio series figures
@thepikachu176
3 ай бұрын
I wish they held off on the studio series to work on it more
@m.otransformers4855
9 ай бұрын
I went to buy him at target this summer, it would ring up, come to find out they have recalled him and target couldn't sell it to me
@_milo-h_
Жыл бұрын
Oh my gosh I thought this was about the actual character not a figure, I got so scared 💀
@surviverplaysuplayer1142
Жыл бұрын
Well with how things are going we maybe get a new version of it (at least i hope so) where even the mask can be revealed that looks more screen acurate because this figure is pretty disapoining for me since earlier leader class and masterpiece transformers look realy amazing like 07 masterpiece megatron and studio series leader the fallen
@NineHundredDollarydoos
Жыл бұрын
Gotta love it when companies start skimping on quality whilst simultaneously jacking up the price. (QC budget) + (materials and engineering budget) + (extra money being charged per figure) = Executive pockets.
@S0n0fG0D
9 ай бұрын
They definitely should've waited until the movie released. This just isnt right.
Пікірлер: 1 М.