Morning jeet singh, thank you, best wishes, Kirk Giordano
@henryjihuna
7 жыл бұрын
Such a clear demonstration of technique, tools, and materials like all your videos, Mr. Kirk. I thinks I could learn linear algebra from you. Thanks and thanks to your camera man Jason and whoever managed the sound. Sound is so important. Cheers fellers!!
@StuccoPlastering
7 жыл бұрын
Howdy Henry Dude, thank you you can't learn algebra from me as I'm ignorant in that department, however my son Jason who also is licensed for plastering contractor and who films all our video's then uploads them to KZitem may be able to teach you that school stuff. Live long and plaster plastering and teaching video’s
@BlackSwan912
9 жыл бұрын
This is awesome. I've laid on my floor many times wondering how they made the patterns when they re-did my 1911 interior 35+ years ago. Now I know! Thank you. This will help me with any future patches.
@StuccoPlastering
9 жыл бұрын
Good Morning Black Swan, happy to be of service. Best wishes with your patterns. Kirk giordano
@skrodgers68ify
5 жыл бұрын
Great video...went right to the point without a lot of nonrelevent jabber. Thank you!
@StuccoPlastering
5 жыл бұрын
Good Evening Scott, now that's rare for me as I do tend to yammer on. Thank you Peace, love, and happiness to all. Sharing stucco wisdom with Kirk Giordano plastering
@JamesScottGuitar
9 жыл бұрын
Skill, skill, skill...you guys are more like Artists. Much appreciated you sharing this knowledge! Helps me fix my parent's home in Nashville!
@StuccoPlastering
9 жыл бұрын
Morning James Scott the guitar dude, thank you, we do try to inform the basics so that our DIY warriors get an idea of how to do it themselves, have a great day! Kirk giordano
@lynnstoddard5858
3 жыл бұрын
Just wanted to thank you Curt for your reply I went out and got a thick nap roller and I am attempting it in about 10 minutes so thank you
@StuccoPlastering
3 жыл бұрын
Good Lynn, atta girl. Happy holidays. Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering
@wheelerwheels
8 жыл бұрын
Thanks for making this vid. I am fixing a poorly patched living room ceiling for a house built in 1958. All the old stuff was removed and resprayed but it was poorly done. I knocked down all the popcorn but as you know, orange peel everywhere even though I used 3 gallons of water from a sprayer to scrape off the popcorn. At least now I can hope to make it all look like orange peel. :)
Thanks. 3 minutes pure gold lesson God bless you man... have a great day...
@StuccoPlastering
2 ай бұрын
Thank you my friend
@gregl2249
8 жыл бұрын
WE NEED TO SEE THE OTHER 47 TYPES PLS
@StuccoPlastering
8 жыл бұрын
Hi greg l, google bontools.com or textured paint rollers, Cheers, Kirk giordano
@nefariousjohnson8851
Жыл бұрын
Hahaha
@joedirt7119
3 жыл бұрын
This dude’s got a black belt in drywall texture
@StuccoPlastering
3 жыл бұрын
Good evening Joe Dirt Dude, LOL. Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk Giordano Plastering
@johnagorman
Жыл бұрын
Kudos for crediting the team It is a rare thing on YT. It should not be
@StuccoPlastering
Жыл бұрын
Howdy John Dude, plastering is, without doubt, a team sport. 😉
@jamarone5902
5 ай бұрын
Kirk for the win again
@StuccoPlastering
5 ай бұрын
Howdy Jamarone, thank you, brother.
@ShellyCline
9 жыл бұрын
Thank you so much for this! It was so helpful. I need to texture a room (ive already done one room by hand!!!) and this is the answer to a prayer. Great video. Have an awesome day :D.
@StuccoPlastering
9 жыл бұрын
Hello etsyBackYardWildLife, thank you, were happy that you have found this information helpful. thanks for watching and have a wonderful New Year. kirk giordano
@muvs32pap
7 жыл бұрын
Ahh, I found the roller texture vid I was looking for!
@StuccoPlastering
7 жыл бұрын
Howdy Dude, no worries, happy to share the knowledge Live long and plaster Giordano’s plastering images and teaching video’s
@trippleaaaaaaaaaa
9 жыл бұрын
Hey Kirk, vic @ Under Construction out in iowa. Like your vids. We do stucco and epoxy floors,as a result I have dried epoxy rollers that I usually toss. Not any more, if I spin them while kinda wet it dries into a spiked roller,over a plastic sheet in one direction it dries semi smooth and over a slate tile it will pick up the pattern. I also use Acryll60 in my 3-1 mix for extra strength and flexibility up here in freeze thaw country,and my brown coat always has 5% of weight in glass fiber,helps in shrinkage or expansion from cracking. You da man!
@StuccoPlastering
9 жыл бұрын
Hey tripleaaaaaaaa dude, thank you, I think you may have invented a new type of roller for a new and cool finish? Plus your recycling. Stay warm in Iowa, it's rained here for the last 5 days, I feel like a caged animal. Best wishes, Kirk and Jason's DIY plastering tips
@lobosolitario.1065
2 ай бұрын
,👍 i keep learning from your videos. thank you
@StuccoPlastering
2 ай бұрын
Cool beans daddieo
@StuccoPlastering
10 жыл бұрын
Interior plaster finishes using textured rollers
@sonny2435
6 жыл бұрын
I always wondered where old Vegas lounge singers went when they couldn't croon anymore-- they're drywallers:: even the dye job~~
@StuccoPlastering
6 жыл бұрын
Good morning Sonny, I'm a plasterer, not a drywaller, PS, If I were to dye my hair it wouldnt be this color. best wishes, Sound advice for plastering issues from your favorite stucco geeks
@tonymessinajr
7 жыл бұрын
thanks for the effort!!! Kirk and Jason... great video... I'm about to do a lot of texturing and I need all the insight I can get.... thanks for the video....
@StuccoPlastering
7 жыл бұрын
Howdy Tony Dude, cool beans daddieo Live long and plaster Sharing the plastering knowledge Kirk and Team Giordano
@terrencerooney6926
Жыл бұрын
Thanks for sharing your trade secrets.
@AlexfromHollywood
2 жыл бұрын
Kirk...you are classic...loved the video too..was just what I needed...Stay cool man!
@StuccoPlastering
2 жыл бұрын
Howdy Hollywood Dude, no problemo, thank you.
@Datsun280zxzxzx
5 жыл бұрын
Coolest dude on KZitem 😎
@StuccoPlastering
5 жыл бұрын
Atta boy D C, I sho-nuff like your style, thank you Peace, love, and happiness to all Bringing Plastering tips to the world, via KZitem Video
@Datsun280zxzxzx
5 жыл бұрын
Please keep on keepin on.. Im sharing your vids to as many people as possible.. All my construction buds.. Your a stone cold cool cat with mad skills ! God bless brother ...
@rogerhodges7656
2 жыл бұрын
Patching and touching up walls in an older housewith these textures is a living nightmare! I am going through it right now.
@StuccoPlastering
9 ай бұрын
It does take a considerable amount of time. Welcome to maintenance👨🏼🎨
@arielf8531
9 жыл бұрын
thank you, now i'll try it myself
@StuccoPlastering
9 жыл бұрын
Ariel F Morning Ariel, You can do it.thanks for watching and have a fantastic day! Kirk Giordano Plastering tips
@sajidullah
9 жыл бұрын
Nice and concise !
@StuccoPlastering
9 жыл бұрын
Sajid Rafique good evening Sajid, thank you. Cheers! Kirk Giordano
@keyofc99
4 жыл бұрын
Thanks Kirk.
@StuccoPlastering
3 жыл бұрын
Good evening James Dude, thank you. Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk Giordano Plastering
@willsmith8586
8 жыл бұрын
Very good Kirk.
@StuccoPlastering
8 жыл бұрын
Hi will smith, thank you, are you the famous movie star Will Smith :) cheers, kirk giordano
@willsmith8586
8 жыл бұрын
+Kirk & Jason Giordanos DIY plastering and stucco tips No lol. Thank you for taking the time to make these videos. To us layman's, you really give some nice pointers.
@StuccoPlastering
8 жыл бұрын
Evening Will, no worries and have a great new year, besides it give me something to do. kirk giordano
@farty1000
6 жыл бұрын
great video ...How cool is Kirk!! he is like the John Wayne of plaster guys!
@StuccoPlastering
6 жыл бұрын
Morning Dave Dude, Man, I like your style. plaster, it’s everywhere you want to be Mastering Plastering for the beginner’s to experts
@donyoung1900
8 жыл бұрын
Nice job. Thanks for the ideas. Cheers.
@StuccoPlastering
7 жыл бұрын
Howdy Don, thank you have a god evening Kirk and Jason’s rendering & stucco advice
@myemail3829
9 ай бұрын
Kirk your the Man
@StuccoPlastering
9 ай бұрын
Thank you, my friend. 🕵🏼
@larryaldama1673
Жыл бұрын
Thanks Kirk 🙏🏽🇺🇸
@StuccoPlastering
9 ай бұрын
No problemo.
@dukesoutfitters3599
2 жыл бұрын
Cyrus from Trailer Park Boys learned a trade 🤣🤣
@unrealantics
4 жыл бұрын
Thank you Sir for your texturing tips, one question I have is do I texture first then prime the drywall? Well after it dries overnight of course. I cut my drywall about 12 inches from the bottom due to water damage then put new drywall in and did all my compound work and was about to prime the drywall. I'm a DIYer and have learned alot from KZitem and I am now a subscriber.
@StuccoPlastering
4 жыл бұрын
Evening Unreal dude, thank you, my friend. Bringing peace, love, and brotherhood back to the world of, “Cement Plastering.” 💃 With over 800 educational and free KZitem videos, by your favorite plaster geek, “me🤓” and my son, “Jason,” the bearded plasterer.🌍
@eddyb8104
4 жыл бұрын
This dude is the shit The talent on this guy
@StuccoPlastering
3 жыл бұрын
Good evening Eddy, man, that comment makes you my newest and bestest pal, thank you.😉 Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk Giordano Plastering
@Gibson3750
4 жыл бұрын
Kirk, you are the Master. I'll be following your method on the orange peel. God bless you.
@StuccoPlastering
3 жыл бұрын
Good evening Shere Dude, thank you, my friend. Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk Giordano Plastering
@stephenlacher587
6 жыл бұрын
Got your black belt in dry wall? You make it look easy. I'm hoping I can hide my poor taping job on a small area by adding texture.
@StuccoPlastering
5 жыл бұрын
Good Evening Stephan, sure you can, give a small area a try at first. Peace, love, and happiness to all. Sharing stucco wisdom with Kirk Giordano plastering
@MicahHeard
Жыл бұрын
I'd love to work with this guy
@StuccoPlastering
Жыл бұрын
LOL, it's not as glorious as it may appear. 👨🏻🔬
@travisleeds2910
6 жыл бұрын
Thanx great idea in action
@StuccoPlastering
6 жыл бұрын
Howdy Travis, thank you best wishes, Sound advice for plastering repairs from your favorite stucco geek
@townhomeeddiefinallyhappy7081
4 жыл бұрын
Thanks a lot just what I needed.!!!!!!!!!!!!!!!!!!!!!!!!!
@StuccoPlastering
4 жыл бұрын
Good afternoon, Eddie, cool beans. Bringing peace, love, and brotherhood back to the world of, “Cement Plastering.” 🌍 With over 800 educational and free KZitem videos, by your favorite plaster geek, “me🤓” and my son, “Jason,” the bearded plasterer.💃
@georgeEPC
7 жыл бұрын
Great videos!!
@StuccoPlastering
7 жыл бұрын
Good afternoon George, thank you Live long and plaster teaching plastering video’s
@emsea7279
2 ай бұрын
Legend. God bless kirk
@StuccoPlastering
2 ай бұрын
Man, I sure like your style, thank you
@vwlover4677
7 жыл бұрын
Thanks man!! You just made my side job alot easier. Thanks man!!
@StuccoPlastering
7 жыл бұрын
Howdy VW dude, thank you Best wishes, Giordano’s teaching video’s
@relaj0
8 жыл бұрын
very nice ...
@StuccoPlastering
8 жыл бұрын
Evening rafael pineda, thank you, Cheers! kirk Giordano
@ediambrocio6629
3 жыл бұрын
this type of videos I loving, very help full, and no bull sh!! thank u sr.
@StuccoPlastering
3 жыл бұрын
Good morning EDI. Thank you. Happy holidays. Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering
@klausphx
2 жыл бұрын
Hey that tree bark roller would work on Exterior Stucco walls for Texturing hmmm I think I'll get one try it out let you guys know. Hey I've seen Jay and Kirk do that. Lol
@CatabductionsAnoym
Жыл бұрын
If i fix areas with rolling mud, it will always show up as sand looking texture instead of the original paint texture look, even after two coats. Repairs rarely match for me! After fixing a spot, regular paint with thick nap works best for me.
@StuccoPlastering
Жыл бұрын
Morning JJC, you are not alone; this takes practice to get the mud correct. It's best to use the longest setting muds such as 90-minute mud or even an hour and a half, plus keeping the roller wet and clean helps big time. 💃🏻
@scifctn
2 жыл бұрын
Hi Kirk, I have walls like the first texture example. How do I repaint, will a regular paint roller come out even on that texture?
@StuccoPlastering
9 ай бұрын
I prefer Deep Nap Rollers personally.
@ryansherry25
8 жыл бұрын
Nice work, anything with a heavy nap roller? Thanks.
@StuccoPlastering
7 жыл бұрын
Howdy Ryan, it does pay to buy the best, the thicker the nap the more they cost, but you save on time. Best wishes, Kirk and Jason’s rendering advice
@lynnstoddard5858
3 жыл бұрын
I just have a quick question can I use that roller to put texture on the wall with primer instead of mud
@StuccoPlastering
3 жыл бұрын
Evening Lynn Darling, not really; you're better off with a think nap roller for painting. If you mean, can you use this to make impressions on the wall with paint, sort of, but to have depth, a coat of mud at least an eighth inch thick works better? I say give it a try as I have not tried that. Post your results here. In fact, use separate color also.😉 Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering
@tylerstafinski6013
24 күн бұрын
Any advice on how to match an old pattern when making a patch?
@StuccoPlastering
23 күн бұрын
@@tylerstafinski6013 Hi Tyler, we do the best we can, that being said I notice every patch ever completed even my own, as it’s what we do for a living. Feathering in patch’s take practice with a green sponge float.😉
@MrWadsox
7 жыл бұрын
Can I do that on an exterior plywood parapet wall? Got minimum working room and don't want to go the stucco rout.
@StuccoPlastering
7 жыл бұрын
Howdy Green dude, I wouldn't advise it, plywood must be primed and painted with the best available paint possible, as rain expands and rots it quickly. this is for interior use, Best wishes, live long and plaster Giordano’s teaching video’s
@lynnstoddard5858
3 жыл бұрын
Can you use that third roller on paint instead of plaster for texture
@StuccoPlastering
3 жыл бұрын
Hello Lynn, of course, you can. You're only limited by your fear imagination will set you free.😉 Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering
@tago8039
7 ай бұрын
Tree bark would be a great back scratcher. Or face ripper for a little kid.
@StuccoPlastering
7 ай бұрын
Sounds unlikly, especially after panting as the mud is made of gypsum which is soft as a baby's butt.
@pretremikiliste2499
7 жыл бұрын
You've saved me
@StuccoPlastering
7 жыл бұрын
Good Evening Pretre, thanks bro we try to please, Best wishes, FYI, all of us here at the giordano plastering channel wish to thank all our subscriber and those of you who accidentally stumble on our channel a happy and prosperous new year kirk giordano plastering
@mckinleysykes614
2 жыл бұрын
What about the splitface block finish Type of brush roller you recommend.
@dianek5118
8 жыл бұрын
can i just paint with these, or do i have to use it with 'mud'?
@StuccoPlastering
8 жыл бұрын
Hello Diane, that is a good question, if you paint with these, unless you have a practiced skill it will simply come out appearing painted without the designs as most folks will keep painting not understanding to dip spread then remove and start again, both painting or imprinting the texture take practice, to answer your question, yes you can. Best wishes, kirk giordano
@muvs32pap
7 жыл бұрын
Hey Kirk Mark again. Just to set tings straight in my mind...should I hard trowel and or try a roller for orange peel texture after letting plaster set for 20 mins.-for a 45 minute mud...a half-hour or so for a 90 minute mud...or should I just be "watching paint dry" is in trial and error and noticing when the setting compound is loosing it's moisture/turning white? Peace from B-more (That's Baltimore in proper English)
@StuccoPlastering
7 жыл бұрын
Good afternoon Mars, weather is the key, if you apply a 90 minute mud this will give you extra time needed as the roller has to be cleaned often or it will build up with mud, plus if it sets too fast and the roller is not wet it will simply pull the mud off. Takes a lot of practice. Live long and plaster Kirk’s how to plastering video’s
@muvs32pap
7 жыл бұрын
Thx for the reply brother. I will be practicing in my basement but it is a half concrete half clay basement...don't know if you came across that on west coast...but the basement will slow drying times so I will have to improvise. I am going to practice using the roller when the plaster is cool to touch but doesn't come off on my hand like wet paint...that's the whole point right. moist enough to be malleable but not so damp/wet that the texture won't set up right. BTW the clay basements here are no longer code so I will have to rip up my kitchen/dinning room to lay concrete slab over it, we call it making a rat trap...though I don't know why:). Sometimes I almost want to go back to renting but it is what it is and I at least I will be able to say I tried!
@StuccoPlastering
7 жыл бұрын
Good afternoon Mars, I'd rather own than rent as you can do what you want to the home. Live long and plaster Kirk’s how to plastering video’s
@muvs32pap
7 жыл бұрын
Your logic is sound, it's why I own my house, don't lease cars etc. A man's home is his castle as they say.
@StuccoPlastering
7 жыл бұрын
Good Evening Mars Dude, exzackory, happy Independence Day, Live long and plaster teaching plastering video’s
@bigsangano
8 жыл бұрын
Tbanks.kirk.:-)
@StuccoPlastering
8 жыл бұрын
Evening El Magnifico, thank you and man, your title is working, cheers, kirk giuordano
@MegaTregg
10 жыл бұрын
Can you say what you mean by plaster here? Aren't there different kinds? I've tried plaster repair mixing out of a bag with water in a mud box but it always seems to set up too fast. Thx for your videos!
@StuccoPlastering
10 жыл бұрын
Afternoon MegaTregg, excellent question as there are many plasters and drywall compounds and mudds available they sometime make my head spin. The product I used for this sample and the one I would recommend to you DIY weekend warriors is Westpac's fast set. I used a 40 minute set for this as I knew I would scrape off then go in the house and use what's was left from my bucket for my project. I would recomend this same fast set drywall patching compound to you DIY folks but get the 90 minute set time, you will have more time to apply, practice and learn. Plasters such as fix all hardens in minutes, not for this purpose. I don't recommend any of the Veneer's plasters either as this is not their purpose. By the way you can purchase this material from Lowe's or Home Depot and most other big hardware stores. The dry bags weigh about 25 pounds. Lastly if you use dirty bucket's, water, tools, drill's paddles you will set the speed time much quicker. Best wishes, kirk and family
@gisellemoreno503
5 жыл бұрын
your job is very good, Is the first time a see a man with a passion for his job. My question is if we can use the three bar for stucco finish, thank you
@StuccoPlastering
5 жыл бұрын
Good Evening Giselle, sorry, not familiar with the term, "Tree bar" If you are wondering if you can use tree bark to dab the stucco, like say sponges, that's a cool idea, each time you dab the plaster, you would have to clean and wet the tree bark so it does not stick, good luck. Peace, love, and happiness to all. Sharing stucco wisdom with Kirk Giordano plastering
@markbuscher8183
5 ай бұрын
Do you do the sunburst texture with a stomp brush? Show em that? Thanks
@StuccoPlastering
5 ай бұрын
No, sorry, I haven’t done that.
@reytriton
4 жыл бұрын
Thanks
@StuccoPlastering
3 жыл бұрын
Good evening Reymar, no problemo.😉 Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk Giordano Plastering
@alive-awake
2 жыл бұрын
Just had someone repair my concrete block wall in backyard. Unfortunately they didn't bother to match the texture of the other blocks. It was the bottom row only I wanted repaired and they did two rows instead. Now the texture difference is very noticeable and they didn't use a mortar joint tool for the joints so you can hardly see the joint. Would something like you are doing in this video work on my wall to try and match up the texture and what material would I use. I suppose going on 48 hrs after, the mortar joints cannot be adjusted? I'm going to call them about it but don't know if they will attempt to rectify the situation.
@StuccoPlastering
9 ай бұрын
Give them a call back.👨🏼🎨
@MissTalented02
9 ай бұрын
Good video but I couldn’t really see what the textures looked like at the end!🤷♀️
@StuccoPlastering
9 ай бұрын
Sorry,🤔
@manuelpatron3119
5 жыл бұрын
I just matched the finish around the windows that were replaced years ago. ( On another note, I discovered red foam floats come in Smooth AND Rough. I also found a green polyurethane foam float, which gave the finish I needed. ) Now my wife wants me to color coat and put a finish over the smooth (1958) stucco. Would it work to just apply a skip trowel or dash/knock-down and then paint? I do not look forward to color coating the whole house. I assume a heavier sand would be needed to make the finish more pronounced. Thanks again!...P.S. Now that I have watched another video, I actually have a sand/trowel finish. Looks like Spanish Lace should work since I plan to paint.
@StuccoPlastering
5 жыл бұрын
Good Evening Manuel, if you have a smooth finish, you can apply any finish you want over it. If you have a heavy finish, now that's much harder to skim coat. Peace, love, and happiness to all. Sharing stucco wisdom with Kirk Giordano plastering
@foxayroxay25
8 жыл бұрын
Do you knock down these textures with a mudding knife, sand it, or just leave it after rollering a few times?
@StuccoPlastering
8 жыл бұрын
Howdy fox, we generally leave as is but there are no rules to one's imagination and or artistry, best wishes, kirk giordano
@Twister051
8 жыл бұрын
OK....the 3rd sample (the orange peel)......what size nap would you use if you wanted LESS of an orange peel texture? Trying to blend in a drywall patch where the surrounding area appears to be either heavy roller stipple (surface looks almost like an orange peel) or might even BE a lightly sprayed orange pool). Anyway, what length nap and how much do you thin out the mud? Last, I guess, is how long do you leave the mud on the wall before you hit it with the roller?
@StuccoPlastering
8 жыл бұрын
Morning Twister dude, even a smooth roller say 3/8 can create an orange peal look, the rules are the heavier the nap the greater the texture, sorry, but it will take a bit of experimenting on your part as I can't see what your doing. Taping muds rolled over once or twice will adhere, however the more you go over this taping mud with the roller the mud has a tendency to come off the wall or ceiling and go back on the roller, again it takes a bit of practice. With taping mud it's not really a matter of time, but instaed what is the dryest surface the roller or the wall, the mud will stick to the dryest like a sock in a dryer. Best wishes, Kirk giordano plastering
@Twister051
8 жыл бұрын
+Kirk & Jason Giordanos DIY plastering and stucco tips . OK, good to know about NOT rolling the same area of the taping mud over and over again. I perfectionist like me would have a tendency to do that very thing! Thx!
@StuccoPlastering
8 жыл бұрын
been there done that that too. Kirk giordano
@peterdonat8289
3 жыл бұрын
Can you do this with stucco or concrete
@sinse718
3 жыл бұрын
I am wondering the same. If that is possible I will do my own cinder block walls.
@StuccoPlastering
3 жыл бұрын
No, you need the rubber or polyurethane templates. They need to be constantly wet each time pressed down onto the wet cement for the pattern to look okay. The bigger the pad, the more experience will be needed. The idea is to keep cleaning these templates each time you press down and then remove them or not work properly.
@tonymessinajr
6 жыл бұрын
I'm going to do some texturing in my house, what kind/size of finishing trowel is best to use, I'm going to have a 10"x10" mortar board and I think it would be kind of good to have a 16" finishing trowel with one end round, the other square, have you any opinion on this?? thanks in advance for any advice you may have.... is it a "feel" kind of thing?....... I see in your videos that I've looked at, you have a squared finishing trowel to do most of your work...... just a detailed question if you don't mind......
@StuccoPlastering
6 жыл бұрын
Good Evening Tony Dude I say use whatever trowel you feel comfortable with. FYI, in our description, you can go to our Amazon link and find many to choose from the link below, www.stuccoplastering.com/tools/ Live long and plaster Kirk and Jason Giordano
@dhimes3
3 жыл бұрын
thanks Kirk...used to use a round brush but my shoulders are shot.....
@StuccoPlastering
3 жыл бұрын
Good evening Himes Dude, sorry to hear this, brother. Bone broth helps, but acid is needed in chicken bones, so add white vinegar and or apple cider vinegar, slow cook for two or three days, mix with your foods or drink it as a broth, full of rebuilding amino acids, which are the building blocks of bones and other stuff. Google Dr.Axe, bone broth, and get that shoulder fixed.😉 Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk Giordano Plastering
@lauragorocica5974
3 жыл бұрын
I have a cinder block exterior wall that ideally I would like to stucco but just can’t afford it. I’m going to paint the walls but would like the paint to apply like stucco. Do you think those thick rollers would do the trick? Thanks!
@StuccoPlastering
3 жыл бұрын
not certain what you mean, sorry, these rollers are designed for painting also.
@lauragorocica5974
3 жыл бұрын
@@StuccoPlastering I guess what I’m asking if using these thick rollers with paint will give it a stucco ish look
@samk.871
Жыл бұрын
I tried to do a texture with roller and all purpose mud on non brand-drywall, experienced a problem of drywall’s paper peeling off when rolling the mud over, did a coat of all purpose mud ski thinking this might help in supporting the paper so it does not peel, tried again but same problem, how you guys recommend this with such issues, what I am missing here if any?
@JB1717
11 ай бұрын
That this is not how you do it lol, all three of those came out looking very similar and yet they shouldn’t have lol
@StuccoPlastering
9 ай бұрын
Hi Sam, when the paper gets too wet it can peal, to stop this from happening you should apply a bonding agent like Lasons, Plaster-Weld before trying to skim over👨🏻🏫
@samk.871
9 ай бұрын
@@StuccoPlastering thanks for the tip
@mataleon1010
4 жыл бұрын
Where can I buy the orange peel roller?
@StuccoPlastering
3 жыл бұрын
Hi Paul, you can find all these textured paint rollers on Amazon.
@Sunakfilth
5 жыл бұрын
I like it a lot.
@StuccoPlastering
5 жыл бұрын
Good morning sexy Girl, thank you Cheers, peace & harmony Sound Plastering tips from your favorite stucco geeks
@darlaallen257
9 жыл бұрын
DOES ANYONE KNOW IF THERE IS A ROLLER OR ANY WAY I CAN PAINT MY WALLS TO LOOK LIKE EXAMPLE: BRICKS, CRACKS, DISTRESSED. THANK YOU MY BASE PAINT IS GREY AND I WOULD BE USING A METALLIC SILVER PAINT ON TOP OF THE GREY FOR THE LOOK.
@StuccoPlastering
9 жыл бұрын
Darla Allen Hi Darla, doubtful a roller can create a pattern like brick work, however you can go to www.bontools.com and search thier rollers for a pettern which may intereste you. Best wishes, kirk giordano Plastering
@SkyHawk2849
Жыл бұрын
Do you have to knock down afterwards?
@StuccoPlastering
Жыл бұрын
Howdy, that depends on what you're trying to achieve, as if you run a trowel over it, that changes the texture. 😏
@bash521
7 жыл бұрын
Hey Kirk what is the brand name of the third roller orange peel you did on this video and size ??
@StuccoPlastering
7 жыл бұрын
Good morning bash dude, you have to log on to Amazon to find this out as I can'"t remember, the link is below in the description, sorry Live long and plaster teaching plastering video’s
@hatzlmike1
4 жыл бұрын
Great
@StuccoPlastering
4 жыл бұрын
Happy New Year mike, thank you. Bringing peace, love, and harmony back to the world of plastering. The complete plastering encyclopedia on video, by the plastering messengers of KZitem with over 800 videos.
@coletteohara2863
Жыл бұрын
A drywall person told me putting mud on a wall and rolling a texture would harden a soft area. Is this true before I waste my time? I will eventually replace dont worry
@StuccoPlastering
Жыл бұрын
Hi Colette, tapping mud is made from gypsum, it does get hard, when it's cured, not as hard as lime plaster, but it works. 🥂
@coletteohara2863
Жыл бұрын
@@StuccoPlastering oh thank you I'll try the lime plaster instead
@mattalbrecht7471
3 жыл бұрын
Can you apply the mud from the pan with these?
@StuccoPlastering
3 жыл бұрын
Evening Matt, doubtful.😉 Note: to all subscribers or anyone who stumbles on our channel with a question, type it into our Stucco/Plastering channel, and like magic, a video will appear to explain how it's done. This feature is miles ahead of any plastering forum. 🥳 Kirk & Jason Giordano Plastering
@easypainterslondon
Жыл бұрын
cool
@StuccoPlastering
Жыл бұрын
Thank you, sir.
@sve2727
4 жыл бұрын
Nice compare
@StuccoPlastering
4 жыл бұрын
Good evening S Ve dude, thank you. Bringing peace, love, and brotherhood back to the world of, “Plastering.” 😏 With over 800 educational and free KZitem videos, by your favorite plaster geek, “me,” and my son, “Jason,” the bearded plasterer.😉
@bummrush3457
6 жыл бұрын
I'm old kirk
@StuccoPlastering
6 жыл бұрын
Howdy Bamm, that makes two of us, time sho nuff is flying by. sort of like toilet paper, "the closer you get to the end the faster it goes," Live long and plaster Mastering Plastering for the beginner’s
@sylviapeters9692
3 жыл бұрын
What’s the name of the orange peel look roller? Can I buy that at Lowe’s? That’s the look I want for my bathroom wall.
@StuccoPlastering
2 жыл бұрын
Howdy Sylvia, these rollers are not sold in hardware stores, too little demand, there's no imaginations for the masses, you will have to google them.😉
@Iamhappy149
9 жыл бұрын
I love him:))
@StuccoPlastering
9 жыл бұрын
Good morning, I am happy 149 , thank you Your project must have come out well? You can buy many different rollers like these online at bontool.com best wishes with future projects. Kirk and Jason Giordano DIY plastering network
@Iamhappy149
9 жыл бұрын
Hi Kirk and Jason....sorry I am from CZ Republic and my english is very bad:D....but I have trouble with selecting plaster for my living room wall....I want(need)a very rough structure plaster ( horizontal striations deep and subtle )-grooved plaster....but all the structures, that I found on the internet, are too fine structure:( I want a very rough with deep furrows by differently....but I do not know, how to create that rough structure, or what material to use....have you email please? I will send my sample photo ideas ..have a nice days. Vladka (from czech) Kirk & Jason Giordanos DIY plastering and stucco instructional videos and forum ...look here please... www.imghosting.cz/images/65013.jpg www.imghosting.cz/images/26zed_r_hovan_.jpg I created a sample from construction adhesives: D this is my ideas:))
@StuccoPlastering
9 жыл бұрын
Hello happy lady from Czech Republic you are wise to speak the Czech language and English. My mom spoke 4 languages but very little English. I can make a tool that will match this finish, with either a whisk broom or a regular broom, you take some vinyl tape and tape some of the ends sporadically and leave some loose and simply swipe sideways, the second picture is the same brush but now the end of a handle is also used for the horizontal deep half round extra lines. You can use a broom, or paint roller handle as long as it about a foot long to make the three line or how many you wish to put in. Also the plaster has to be applied at least 1/2 inch thick plus you would need to know how much time you have before the plaster sets before you can do your horizontal sweeps. To long on the wall it will set, to little time it will simply smear and or fall off. I would recommend a 90 minute drywall compound apply thick then do the swipe with the improvised whisk broom, it will take practice, but eventually you will get the desired finish. best wishes. Kirk and Jasons DIY plastering network
@Iamhappy149
9 жыл бұрын
ok ok thank you..I try it....but what material I use for this thick layer structure ? Silicone and decorative plaster and unfortunately too expensive ..this can be done from the gypsum-plaster ?.thank you..Vladka
@StuccoPlastering
9 жыл бұрын
Hello Vladka, I would use the most readily drywall compound material available, Westpac's Fast set, you can purchase this at all the major hardware stores, especially if you can't find a stucco and plastering material yard nearby. They sell 20, 40 and 90 minute set times. Depending on how thick you wish to go try the 90 minute mud first, this mud gives you more time to practice, Try applying 1/4 inch at first as this might give the the depth you want. Lsst tip, mix the dry fast set drywall compound powder with clean water into clean buckets otherwise it set's faster than the bag says. these bags are very inexpensive too. best wishes, Kirk & Jason Giordano’s DIY, stucco and plastering instructional videos and forum
@mikes5079
2 ай бұрын
*Add a generous amount of corn meal to a gallon of primer, then roll on. Looks just like plaster*
@StuccoPlastering
2 ай бұрын
Plus might taste good to the flys
@wilg4654
7 жыл бұрын
i wish you lived in miami
@StuccoPlastering
7 жыл бұрын
Howdy Wil, that makes two of us, Best wishes with your plastering or interior projects. Kirk & Jason’s stucco repair video’s
@tonymessinajr
6 жыл бұрын
Kirk!!!! can you help me with a problem I'm having? I'm texturing my walls now and I also have purchased a couple of types of rollers for testing to see what I get, but I am having a problem with cracking after it dries, I'm about an 1/8" thick also, but when I use the first roller you show in the above video, it looks just like your demonstration, and then after it dries a bit, I lay the peaks down (knockdown?) with the trowel and get a really cool effect, but then after it dries, it's cracked. Will painting hide that? or do you have any suggestions? I took a picture of it, but I can't put it with this post. thanks in advance for any advice!
@StuccoPlastering
6 жыл бұрын
Howdy Tony, I would advice using 90 minutes Easy Sand or Westpac's drywall compound, this will give you enough time to finish, wet the roller often also. If your using taping mud this will crack big time as it's designed to only be applied very thin. Live long and plaster Mastering Plastering for the beginner
@tonymessinajr
6 жыл бұрын
every time I turn around, there is yet another product and step to properly finishing a wall for painting, now I need to apply Easy Sand, I watched several videos on applying this stuff, but none of them were about texturing, do I texture with Easy Sand too? or do I apply Easy Sand and then use something ELSE to texture with and if so, what do I use, joint compound? I'm trying to finish the wall to paint it, but the work/learning phase of this job is seemingly endless and long.... any help there Kirk??? a kind thank you in advance, I really appreciate your expertise!!!
@StuccoPlastering
6 жыл бұрын
Good Morning Tony, if you already have the texture you want and it's cracksed you might try some soupy mud weather or not Easy sand or wespac's to fill in the cracks, tapping mud or joint compond if applid more than an eith will crack possibly, but has no sand which may be the finish you want where the drwall componds have a fine sand so they wont shrink, but the fine sand may show. I have done seval of these finishes and they are a rel drag to get right. Live long and plaster Teaching the world to stucco, one video at a time.
@bricknmotor
2 жыл бұрын
Imo. Let me repeat that. Imo. I think all 3 just look to generic. Im gonna play around with some of my own generic ideas. I can be proud of generic only if i created it. The personal touch supercedes it though. Again,just my opinion. Im working on my bathroom that had wallpaper over that pretty women pattern paneling from the 90s. So lots of unsmooth flaws that i dont feel like goin thru the tedious that is making it completely flat and smooth. Eh im sure im boring. Everyone has their own home projects and with that. I wish everyone great luck and fine skills on your own jobs to do!! Cheers to the freedom to restore, renovate and remodel your very own home. 😁
@StuccoPlastering
2 жыл бұрын
Imagination is everything in this life, here's a small tip keep the mud wet and slow curing, "not 20-minut mud but instead 90 to the slowest set they carry, and keep your roller wet and clean.😉
@gardengirl694
4 жыл бұрын
Loosen your belt...you can’t breathe. 😂.
@StuccoPlastering
4 жыл бұрын
Evening Garden Girl, atta girl. Introducing peace, love, and harmony back into the world of plastering. The University of plastering by Kirk and Jason Giordano
@bobwhelk2117
Жыл бұрын
Shiver me Timbers- Nice pirate shirt! Arrrggh.
@StuccoPlastering
Жыл бұрын
Thank you, SpongeBob. Who lives in a pineapple under the sea...... 😉
@A.C.71
5 жыл бұрын
to all you martial artists he is a real black belt lol
@StuccoPlastering
5 жыл бұрын
Good Evening Christ living and loving dude, exzackory. Peace, love, and happiness to all. Sharing stucco wisdom with Kirk Giordano plastering
@DBZSeanzie
2 жыл бұрын
Is that a toupee?
@StuccoPlastering
2 жыл бұрын
LOL, why would I put a toupee or wig on a roller? It's just a heavy or thick nap roller.🤔
@DBZSeanzie
2 жыл бұрын
@@StuccoPlastering ah yes! I see now! 👍🏼 Happy rolling
@nadirsalih1235
6 жыл бұрын
Can I use Rolla on any kind of dye? Please specify the type of material you are using
@StuccoPlastering
6 жыл бұрын
Good morning Nadir, I'm sure it's possible. I skimmed the wall with a 20-minute fast set drywall compound names is Wes PAC's drywall compound. Live long, and plaster Plastering tips and techniques
@nadirsalih1235
6 жыл бұрын
Im sure I am sorry, but I did not understand, I say, and I repeat my question to you. I am from Iraq. Can I do this in any way?
@StuccoPlastering
6 жыл бұрын
Good Morning Nadir, my apologies, yes, there are many different rollers with a lot of designs, you can use almost any plaster or even taping mud you want, and if you wish to add colors, this too you can do. The most time-consuming thing about using these rollers is if you apply any plaster you must keep the roller wet or it will smear the pattern and the mud/plaster, plus some areas may may have different settings, meaning the plaster applied may be wet or dry, if so the texture will be different. It looks easy as I'm just doing a small sample but on a wall it's quite difficult. happy holidays Live long and plaster Kirk and Jason Giordano plastering tips
@myself5530
Жыл бұрын
Yhe first one looks like popcorn texture
@StuccoPlastering
Жыл бұрын
Make one wanna go to a movie, Huh?🤔
@davyrao
7 жыл бұрын
Hi kirk,how about scallop finish look?
@StuccoPlastering
7 жыл бұрын
Howdy Mate, sorry, not sure what this finish is. Best wishes, and have a god evening Kirk and Jason’s rendering & stucco advice
@davyrao
7 жыл бұрын
builderscrack.co.nz/data-files/imagedata/135/135187/large.jpg look like this one
@StuccoPlastering
7 жыл бұрын
Hello Mate, we call this pattern or texture a swirl finish, type in in our channel how to match a swirl finish or just swirl finish. best wishes, Kirk and Jason giordano’s rendering videos
@paulatiredofthisshit
5 жыл бұрын
Is that what it is, a black belt? It looks like a thin back brace but with that shirt it makes you look like you're trying to dress up to be a pirate.
@StuccoPlastering
5 жыл бұрын
Evening Paula, Avast ye, I pirate I may be, So gather 'round, matie, and learn to plaster. Peace, love, and happiness to all Bringing Plastering tips to the world, via KZitem Video
@robertb7362
5 жыл бұрын
3rd demonstration is not orange peel.
@StuccoPlastering
5 жыл бұрын
Good Evening Robert, what would you describe it as. The package says, orange peel. Peace, love, and happiness to all. Sharing stucco wisdom with Kirk Giordano plastering
@cranstjs
4 жыл бұрын
@@StuccoPlastering I have to agree with Robert. I have orange peel texture on my home walls. And off course, knowing what an orange peel looks like, it's a more gental raised but smooth speckles. What I'm seeing in the close up of the video looks like something very different. Sort of wavy. In fact you can buy a can of orange peel spray for touch ups (which I have) where you repair and area and it sprays the orange peel texture on and you paint it. Looks just like my original orange peel. It also has a nozzle that adjust for bigger peel or small peel. Just sayin.
Пікірлер: 263