Thank you. Every time I watch your painting videos I learn something new.
@TheLastLayer111
22 күн бұрын
Good to hear, i try to think of anything I may have missed and add it in to the videos.
@balmighty81
26 күн бұрын
Painting the sandpaper to add battle marks is a great tip. Never seen that before. Learning a ton from you 😁
@TheLastLayer111
26 күн бұрын
Glad to hear it!
@robbizza1
14 күн бұрын
This was a great video,the paint on sandpaper is genius. Between the detailed instructions and seeing your execution gives me confidence to go for it. I really enjoyed the longer video,keep em coming.
@TheLastLayer111
14 күн бұрын
Thank you. Glad you enjoyed it. More to come.
@andyb7029
26 күн бұрын
Great video. I like the longer format and I am going to try those weathering techniques in my next build.
@TheLastLayer111
26 күн бұрын
Awesome, thats always my favorite part of any build.
@user-zd1eg2jg6i
26 күн бұрын
Thank you for the videos, do t worry about the run time, seemed fine to me
@rexpowercolt885
26 күн бұрын
I trust your advice more than anyone else! Keep it up!
@Jeffs_Effects
26 күн бұрын
I was very interested to see how this build turned out. I have my own Revan cosplay that I may need to update now. :) Loved the full start to finish format and I really liked that sand paper weathering process.
@TheLastLayer111
26 күн бұрын
Its an awesome build, there is no right or wrong way. Just have fun doing it.
@prodigy001games5
13 күн бұрын
Might be worth mentioning too, Flat Spray paint drys and bonds quicker than Gloss paints, so if your project has areas that need to masked off after your base coat, Using a flat base can speed that process up a little bit for you!
@TheLastLayer111
13 күн бұрын
Absolutely, Great Point. Ill mention that. Thank you
@trebur3167
26 күн бұрын
Love the content man 💪 keep up the great work! I would love to see more start to finish videos.
@TheLastLayer111
26 күн бұрын
Thanks for the support, stay tuned, more to come.
@johnsimon7822
23 күн бұрын
This is the first video of yours I have seen, but you have my attention now, sir. Thank you for being so detailed and taking your time. I find that a LOT of other videos of this type are rushed and don’t give much insight into how they do things, but you are, in just this one video, a HUGE help to us beginners. I will be watching as many of your videos as I can and thank you again! Please keep the content coming and know you are appreciated! Oh, and the work you did here is top notch! I love it! P.S. Before I look at your other videos, I’d love to see a Batman or Red Hood video if you are interested in those characters.
@TheLastLayer111
23 күн бұрын
Thank you, i am planning on doing them eventually, stay tuned. Got a bunch in the works.
@Sajkot
22 күн бұрын
I don't comment on videos very often. I've just watched all your videos today, they are just...really great! This is by far the most informative and hands on channel/videos on this topic that I've ever seen, no crap talking or fast moving. Thorough and detailed. I will also mention that I, and I'm assure amongst others, appreciate that you also try keep it simple and mention cheaper options for they who can't use a fancy spray gun. You really deserv more subscribers, keep it up and I'm sure that you grow fast. Looking forward to your next video! :) Video idea: Tool cleaning!
@TheLastLayer111
22 күн бұрын
Thank you for the kind words. I will plan on a cleaning video.
@thelastthunder10
Күн бұрын
Wow!!
@cuthwulf
26 күн бұрын
Great video. I really like how you do the battle damage. I've seen drybrushing and other techniques, but never thought about using folded sandpaper. Don't worry about the longer format, I can't speak for others, but I will sit and watch a 30 min. restoration or craft video with no problem. I think the key is to keep it precise and moving along and not spend too much time on any one subject unless it's a really complicated step.
@TheLastLayer111
26 күн бұрын
Thanks 👍
@arongatt
25 күн бұрын
Exelent work and video
@TheLastLayer111
25 күн бұрын
Thank you very much!
@moxxi761
25 күн бұрын
Love the content brother
@TheLastLayer111
25 күн бұрын
Thanks for the support
@jawajunction
24 күн бұрын
Amazing video. Learning so much and getting some great tips. How much of the dilution solution did you add to your 4:1 mix? Looking to use this same process for filling later lines.
@thegreat3Dini
25 күн бұрын
Great video! You mentioned you had to reduce the high build primer when spraying with the 1.7 nozzle. Would you mind explaining more on how you reduced it?
@TheLastLayer111
25 күн бұрын
I used the Roberlo S322 urethane reducer. Its a standard thinner for primer and clear. Its relatively cheap, like less than 12.00. I mixed it 4:1:1 (primer, activator, and reducer), Most any urethane reducer should work, but ill get it added to the description. Thanks for pointing that out.
@darksidearmory9321
25 күн бұрын
Outstanding!! I just came across your page this morning when looking for ways to smooth my PLA prints. I subscribed immediately, lol. I'm in the process finishing up a Revan helmet for my son and wanted to ask if you would be so kind as to post the names and/or the links to the acrylic paints you used. Thank you so much and please keep up the good work.
@TheLastLayer111
25 күн бұрын
All links added to the description Enjoy..
@holidaystyles44
17 күн бұрын
Saw your video and be came a subscriber instantly ,I was wondering can you do a video making a iron man mk2 helmet using your techniques.i really want to learn how to use automotive spray guns .thank you
@TheLastLayer111
17 күн бұрын
I can definitely add it to the list. I was actually thinking abut doing that in the past. Just never got around to it yet.
@johneddy7285
25 күн бұрын
I always get nervous about taping right over a painted surface. I always end up taking some paint off when I pull the tape off... Or on my recent Ironman Helmet, I pulled the tape off and it left a gummy residue behind and I ended up destroying the paint trying to get it off and had to strip it back down and paint it again.. Great Videos! Keep it up!
@TheLastLayer111
25 күн бұрын
I always stick with fineline and delicate surface masking tape, for those exact same reasons. It can be frustrating.
@TheLastLayer111
25 күн бұрын
One other tip, If you are working with real delicate paint and very intricate taping, you can always use the innercoat clearing method, where you apply clear after your base, then do your masking and taping over it, once it dries. It takes a bit longer, but if you do screw up you can take some alcohol and remove the paint, without affecting the basecoat. after you are finished put another coat of clear over the whole thing. This is how some of my friends that to graphics go about it.
@jcchan312
20 күн бұрын
I'd loke to request a video tutorial of building and painting the masked and unmasked Predators on the wall
@TheLastLayer111
20 күн бұрын
There is great youtube tutorial by creative compositions, on painting the unmasked predator. I can work on putting something together for the biomask.
@jcchan312
19 күн бұрын
Thank you!
@jcchan312
18 күн бұрын
Your paint job on the unmasked pred looks beautiful! Wouldnt mind seeing it up close in a video review 😁
@TheLastLayer111
17 күн бұрын
I'm actually going to move them around, Ill try to get a closer shot for everyone.
@jawajunction
23 күн бұрын
Great video! Love the process. How much dilution did you add to the primer? Ordering your same supplies to use your process.
@TheLastLayer111
23 күн бұрын
About 4:1:1 . I typically don’t go above 25% tops.
@jawajunction
23 күн бұрын
@@TheLastLayer111 awesome! Thank you! Now I just have to wait for my supplies!
@davidcooper574
26 күн бұрын
How long did you let the paint dry before you started taping? Great video as always
@TheLastLayer111
26 күн бұрын
A couple hours. That's probably a bit overkill, but better safe than sorry.
@RepsyHD
24 күн бұрын
If i try to do a paint job the best i can get is visible bumps and scratches from the surface of the helmet. HOW CAN IT LOOK like that with that minimal of sanding
@TheLastLayer111
24 күн бұрын
If its real bumpy, you may be putting it on to dry, slow down a little and make sure you are overlapping coats. It should go on wet, not to the point of running and sagging but close. Good clear is designed this way. Think of when they paint cars. The factory doesn’t wet sand their final coats, and it has minimal orange peel. It takes some practice, but you will get it.
@TheLastLayer111
24 күн бұрын
In the case of bumpy base coat with scratches, make sure you put enough filler primer on and take your time wet sanding. The finished product will only be as good as the base its on. Good luck, you will get it
@andreasselin9962
25 күн бұрын
What stl files did you use, great looking helmet you made.
@TheLastLayer111
25 күн бұрын
They are the Nikko Industry files. Ill add it to the description. Thanks for pointing that out.
Пікірлер: 52