[IMPORTANT] If you're using the earbuds in app and have paired them with your phone first, you have to factory reset them in the app, put them back in the case, disconnect your phones bluetooth, take em out of the case and then go through the process shown in these videos of how to connect them with PC. First connect them into computer, so it recognizes it as a audio device, THEN connect them with your app and phone like you did before. If you do this process in the reverse order, you run into these kind of problems that your computer dont recognize the bluetooth earbuds as audio devices. I wasted so much time resetting my computer, updating bluetooth drivers ect that I hope this message helps someone!❤
@messimagic2527
Жыл бұрын
Thank you very much 🙏🏻
@Arigauto
Жыл бұрын
Thank you!!
@johanneshettinga
Жыл бұрын
thank you so much!
@clewismessina6630
Жыл бұрын
After an hour of trying everything recommended online, this is literally the only thing that worked. Thank you, so much!!!!
@andreyanboyadzhiev231
Жыл бұрын
Wholy moly... , this right here.... how can they NOT put HUGE EMPHASIS on this , its HORRIBLE user experience.. not to note people about it!
@DonisAnimation
Жыл бұрын
THank you man that was 2 weeks pain of searching how to connect my JBL headphones and finaly I find your video =)
@MegaSafetyFirst
Жыл бұрын
Glad to hear! Thank you for your feedback 👍
@shayeh6791
Жыл бұрын
Thank you so much!!! I was frantic about how to connect my earbuds to my computer as an audio device as it was only pairing to my laptop as "other device" which was really frustrating! the difference was that I needed to manually pair my earbuds, instead of pairing them in the charging pod! your video saved me hours of frantically scouring the internet for a solution 🙏
@aviapoIis
Жыл бұрын
[IMPORTANT] If you're using the earbuds in app and have paired them with your phone first, you have to factory reset them in the app, put them back in the case, disconnect your phones bluetooth, take em out of the case and then go through the process shown in these videos of how to connect them with PC. First connect them into computer, so it recognizes it as a audio device, THEN connect them with your app and phone like you did before. If you do this process in the reverse order, you run into these kind of problems that your computer dont recognize the bluetooth earbuds as audio devices. I wasted so much time resetting my computer, updating bluetooth drivers ect that I hope this message helps someone!❤
@JohnnieHolidayOfficial
3 ай бұрын
Big thank you! I couldn't figure out why my PC couldn't see these headphones. You've saved me a ton of time!
@anothersmallpotatopassingb8167
Жыл бұрын
You sir are a life saver i've been looking for a way to connect my earbuds for more than an hour i was losing hope and here you are with the perfect solution, thank you so much
@lamechmech
Жыл бұрын
Thank you so much! You made it simple. My earbuds was not showing earlier and now it's connected after changing it to pairing mode.
@victorsoto5165
Жыл бұрын
HOW TO PAIR JBL Tune 230NC TWS TO WINDOWS: It was actually very simple to solve. Put the headphones in their case. Unpair the earbuds from the cell phone. (If you have them linked to the pc with the pc icon, also unlink it). And it gives you search for a new bluetooth device. You must wait for the headphones icon to appear, do not despair. Wait a good while for the correct icon to appear. And that's it, so without doing anything else it worked for me. I don't know how technical or not, but this solution worked for me, but I hope it works for you. A hug to all and JBL is a good brand. Successes!
@victorsoto5165
Жыл бұрын
Español: CÓMO EMPAREJAR JBL Tune 230NC TWS CON WINDOWS: En realidad fue muy simple de resolver. Ponga los auriculares en su estuche. Desempareja los auriculares del teléfono celular. (Si los tienes vinculados al pc con el icono de pc, también desvincúlalos). Y te da la búsqueda de un nuevo dispositivo bluetooth. Debes esperar a que aparezca el icono de los auriculares, no te desesperes. Espere un momento hasta que aparezca el icono correcto. Y listo, así que sin hacer nada más me funcionó. No sé cuán técnico o no, pero esta solución funcionó para mí, pero espero que funcione para usted. Un abrazo a todos y JBL es una buena marca. éxitos!
@victorsoto5165
Жыл бұрын
français: COMMENT ASSOCIER JBL Tune 230NC TWS AVEC WINDOWS : C'était en fait très simple à résoudre. Rangez les écouteurs dans leur étui. Dissociez le casque du téléphone portable. (Si vous les avez liés au PC avec l'icône du PC, dissociez-les également). Et cela vous donne la recherche d'un nouvel appareil Bluetooth. Vous devez attendre que l'icône du casque apparaisse, ne désespérez pas. Attendez un moment que l'icône correcte apparaisse. Et c'est tout, donc sans rien faire d'autre, cela a fonctionné pour moi. Je ne sais pas si techniquement ou non, mais cette solution a fonctionné pour moi, mais j'espère que cela fonctionnera pour vous. Un câlin à tous et JBL est une bonne marque. succès!
@MrRhix
Жыл бұрын
Thank you so much! I didn't know about taking only one out of the box to enter pairing mode. I've been searching for so long, thanks!
@Nikookaburra
10 ай бұрын
Many thankx! And for those who have JBL Tune 230 NC TWS, just do the same process EXCEPT that you should not touch where it says "JBL", but right on the blue diode.
@alejo35357
2 жыл бұрын
thanks! turning on the Bluetooth pairing mode made the trick for me! as previously just by opening the case it recognized them not as headphones but like a cellphone or sth like that,
@TheMelaniebarber1
4 ай бұрын
I've been wanting to hook up my earbuds to my laptop forever. Thank you so much!
@danielmarchioti1858
2 жыл бұрын
thank you so much! I was missing a small detail - taking only one headphones out of the box 🤦🏽♂
@un_fuckurself
2 жыл бұрын
Hi, mines dont appear in my output settings, any idea? they are connected tho
@HaRsHiLz
2 жыл бұрын
Mine too
@DanielSOlmstead
Жыл бұрын
This worked perfectly for JBL Live Pro 2's as well. Thank you!
@jordanpatterson9317
2 жыл бұрын
What is the PIN number? It is asking me to connect
@mariabrzeskiewicz-domingue5321
Жыл бұрын
Clear and helpful. Good accent and pace. Thanks!
@frutellasweet2474
2 жыл бұрын
Thank you! It worked with the JBL LIVE PRO+ TWS. No pin!
@MySkills7
5 ай бұрын
That work now Thank you for your solution and saving my time.
@Mamène-G
Жыл бұрын
damn bru ty so mutcth. i try it since few months. cause i used only on smartphone i forgot how to enter in pairing mode. hope i will remember that for futur.
@lukecalleja4068
2 жыл бұрын
Thank you! This also worked for the JBL Tune130NC
@nko4865
2 жыл бұрын
Thank you for the detailed instructions!
@Capella8971
Жыл бұрын
you saved my life tyyyy!!!
@grindTIME1985
Жыл бұрын
i have the JBL230NC and the input (microphone) is not detecfed on Win11. But I have it detected and working as an output...
@Gokul-oq8nb
2 жыл бұрын
Thanks bro,works for me, using tune 130's . for me I have to press the button for 5 second and have to put it inside the case ,then go to blutooth and add device ,it then shows music 🎵
@HaRsHiLz
2 жыл бұрын
Even i have 130nc i am not able to connect please help me
@lucaspaitl
Жыл бұрын
If you have TWS NC, this will work too on w10, and w11. Do not connect "JBL TUNE230NC TWS-LE". This connection will not play audio on your phones. You must choose "JBL TUNE230NC TWS". Just tap 1 time than 5sec holding and it will appear on you bluetooth options.
@monicatorres6688
Жыл бұрын
Thankyou!!! this comment really helped me!!
@marys1417
2 ай бұрын
Thank, thank THANK YOU❤❤❤❤
@MultiBiggie007
Жыл бұрын
Thanks! It worked when I only took one earbud instead of both.. :)
@lucia7046
11 ай бұрын
Hello! Please someone help me. I just bought a pair of Jbl Live Flex in ear buds and the right bud won't connect no matter what I do. I tried with 1 tap and long press, 2 tap and long press, switching on and off the bluetooth, putting them back in the case, removing them..everything and still doesn't work. HELP!
@der2wq_124
Жыл бұрын
Thank you so much. I would never figure it out on my own❤
@MegaSafetyFirst
Жыл бұрын
You’re very welcome 😊 thank you for your feedback 👍
@sahityaa94
Жыл бұрын
THANK YOU SO MUCH. IT WAS REALLY HELPFUL.
@ianmachiaverna
Жыл бұрын
thanks this helped alot
@meymeyy_
2 жыл бұрын
sir you saved my life thank you so much
@owenidehen9897
Жыл бұрын
Very helpful video. Thanks for helping out with the useful instructions.
@yiseulcha6194
2 жыл бұрын
Thanks , I didn't know I could touch the button lol
@techin4404
7 ай бұрын
hi so my vibe flex's only connect as a mic i tried everthing and it did not work
@Hardcore-oj8fe
Жыл бұрын
guys i had an other problem i connect the earbuds all good but they don t play in the stereo option they play only in handfree option why ???
@silaskowl
2 жыл бұрын
Thx from Brazil bro, thk u
@harshal13
2 жыл бұрын
Good details instructions! Thank you
@rowanjones7523
2 жыл бұрын
I can not get my earbuds to appear in the drop down menu of the sounds app. Any ideas why? It tells me that I am connected to them in the bluetooth app. But they just don't appear.
@victorsoto5165
Жыл бұрын
I just bought some JBL Tune 230NC TWS and the exact same thing happens to me as to you. They do not appear in the audio dropdown menu for me, but in the one below. And it tells me that it is connected to Bluetooth but it does not appear. Were you able to solve that problem or are you still the same without it appearing?
@MegaSafetyFirst
Жыл бұрын
Hi, in the Bluetooth settings screen, What are the earbuds named as?
@victorsoto5165
Жыл бұрын
@@MegaSafetyFirst JBL TUNE230NC TWS is the name in the bluetooth settings screen.
@chepa1763
Жыл бұрын
I have the same problem, anyone an idea on how to solve?
@victorsoto5165
Жыл бұрын
@@chepa1763 HOW TO PAIR JBL Tune 230NC TWS TO WINDOWS: It was actually very simple to solve. Put the headphones in their case. Unpair the earbuds from the cell phone. (If you have them linked to the pc with the pc icon, also unlink it). And it gives you search for a new bluetooth device. You must wait for the headphones icon to appear, do not despair. Wait a good while for the correct icon to appear. And that's it, so without doing anything else it worked for me. I don't know how technical or not, but this solution worked for me, but I hope it works for you. A hug to all and JBL is a good brand. Successes!
@juancarlosramos8952
Ай бұрын
Thanks crack!
@KK-uu9vh
Жыл бұрын
It works! Thanks a million.
@sharon-rosenanyaro9497
Жыл бұрын
This is great man, thanks a bunch!
@rachelkoutsioukis9038
Жыл бұрын
Thanks! Quick and easy to follow.
@Omar-nc7jz
2 жыл бұрын
Holaa, quisiera preguntar si se puede abrir la caja de estos airpods, tengo unos iguales y no le llega la carga y quiero abrirl la caja pero no sé puede.. alguna ayuda ???
@TotoriusOUT
Жыл бұрын
Had to hold for 5s, then put it back in the case, then appeared audio device. Live pro tws
@BPL102966
Жыл бұрын
Thank you very much for your help!
@MrdjBryanzmix
Жыл бұрын
do you need bluetooth installer
@danielagvalencia
2 жыл бұрын
Thank you! It worked with the JBL Tune230NC
@saumyajana2925
2 жыл бұрын
How!!! for me its not recognizing as a audio device.....
@11111matheus
2 жыл бұрын
@@saumyajana2925 Same here...
@11111matheus
2 жыл бұрын
@@saumyajana2925 It's working here now! you need to turn off the tune 230 and disconnect from your phone, after that you'll search the earbuds on windows and wait till the audio icon appears, don't connect with the PC icon, just wait until the audio/headphone icon appears
@Jagdishtemkar1
2 жыл бұрын
@@11111matheus Nice! Now this seems so silly... 😝. But it worked! Thanks a ton! The buds appear as an audio device in a separate option below, just wait for it.
@11111matheus
2 жыл бұрын
@@Jagdishtemkar1 glad to help! 😉👍
@KialaModestine
2 жыл бұрын
Thank youuu. You're my savior 🤣
@MegaSafetyFirst
2 жыл бұрын
Thank you for your feedback! I appreciate it 👍
@dawnnaomi7907
8 ай бұрын
Thank you!
@dieseljepan323
Ай бұрын
Thank you thanks 🍀
@ahmedgamaleldinaliahmed8931
Жыл бұрын
Thank you very much !!!!!
@vazullandenberger4824
2 жыл бұрын
i have a JBL tour pro and i can pair tho the laptop but the laptop think its a phone or screen.
@MDAbdullah-fo9py
Жыл бұрын
thanks brother
@dhaarmesh5790
Жыл бұрын
Thx
@bezerkz9541
2 жыл бұрын
mine asks for a pin
@MegaSafetyFirst
2 жыл бұрын
This seems to sometimes happen with some devices and there is no valid pin. It usually works correctly when starting over with the pairing process.
@Astrotide162
8 ай бұрын
doesn't work :(
@saumyajana2925
2 жыл бұрын
My device JBL 230NC is not recognized as a audio device. It's just showing as a random device.
@mooney79
2 жыл бұрын
I had the same problem. Unpair it completely, then search again. On my pc it shows up first as a regular bluetooth device (not audio)...let it keep searching and then it appeared again this time with "audio" as the subtext and the icon changed to a headset. Add the audio device. Hope that helps
@saumyajana2925
2 жыл бұрын
@@mooney79 resolved. Thanks
@HaRsHiLz
2 жыл бұрын
What we have to do can u please help me
@saumyajana2925
2 жыл бұрын
@@HaRsHiLz disconnect the device and delete the device from your laptop. Then search again for the Bluetooth device. Don't connect it till the Bluetooth headphone logo is showing. When that logo comes then connect it. Hope that helps.
@HaRsHiLz
2 жыл бұрын
@@saumyajana2925 but how much time after headphones icon will come It is not showing
@rngabu35
2 жыл бұрын
what if it asks for a pin
@MegaSafetyFirst
2 жыл бұрын
This sometimes seems to happen, but there is no valid pin you could enter. It usually doesn’t ask again if you start over. Depending on the computer it might also help to update its Bluetooth driver.
@lawrencematthews9025
Жыл бұрын
Bluetooth
@Hammerage1
Жыл бұрын
F*** touch. It's so hard to know if it's workingas intended. I just want buttons.
@ricelice96
Жыл бұрын
:)
@alexnovak3319
Жыл бұрын
I have a question! how do i add a new device if this bs of my PC dont detect any...?
Пікірлер: 111