Excellent video my friend. Editing and information were fantastic
@adambmhabuild
2 жыл бұрын
thanks, im glad if this video does help you
@njoy51
2 жыл бұрын
Damn .. such a gruelling work, I can feel the ribs, abs shoulders paining
@adambmhabuild
2 жыл бұрын
Hahaha. I had cramps in my legs while doing this. and my neck is hurting so much. but what can I do, had to do it with what I have at the moment.
@njoy51
2 жыл бұрын
@@adambmhabuildyou're a legend. Take care of yourself Sir, love and respect from 🇮🇳
@nazifsufari3076
2 жыл бұрын
mantap boss ku 👍🏻
@hpenvy15
Жыл бұрын
Golden! Thanks so much!
@tomskimcdouglegaming806
7 ай бұрын
You didn't show the trick for separating the gearbox from the clutch!
@TFV-Motorcycles
2 жыл бұрын
Hardwork
@HanifEFIMechanical
2 жыл бұрын
Good work
@ColinDevilliers
3 ай бұрын
I see only 2 of the flywheel bolts got washers.whats the purpose of that washers
@hooman3402
2 жыл бұрын
is it okay if I will only resurface the pressure plate instead of buying new one? And do I need to resurface the flywheel everytime that I will put new clutch components?
@adambmhabuild
2 жыл бұрын
If your pressure plate is OEM, I recommend you to just buy a new pressure plate unless your current pressure plate is high performance one which is costly to replace, then just resurface it. but i did come across some forum that mentioning, if you resurface or remove some material like 0.2mm on the surface of your pressure plate, then you also need to remove 0.2mm at the bolt/contact surface with the flywheel, if not, you will lose some clamping force with the clutch when you install it. This is what I read on that forum, but i never done that. you should ask other people opinion or your mechanic or your local machine shop about it. You don't need to resurface your flywheel everytime you change your clutch. You only need to resurface your flywheel if the runout is out of specification ( surface not flat ), if im not mistaken for this car the runout for the flywheel is 0.3mm. so you need to resurface the flywheel if the runout is more than 0.3mm. you can get the reading using dial gauge. or just bring it to the machine shop to check it for you.
@antoniodeidda9619
4 ай бұрын
How many hours of work are there?
@flylowkey3407
2 жыл бұрын
I have a shake when the Pajero is in gear but the brake is pressed. Please tell me this is just the mount or something. Doesn't shake when in neutral or park
@garymatten
Жыл бұрын
Hi mate did you replace the gearstick plastic bush when you put it back in? My shifter has a heap of slop when in gear, thinking the bush might be worn. Thoughts?
@pyromaniac354
Жыл бұрын
yep.most definitely we used to use a piece of garden hose instead lol
@MFRiley
2 жыл бұрын
7:26 what is this wire? A ground for something?
@adambmhabuild
2 жыл бұрын
I'm not 100% sure if this is correct, but based on my knowledge, it seems like a ground wire, since this transmission have some electrical wiring to it.
@williameunson2013
2 жыл бұрын
hi did take the wiring harness of before you started undo the plugs ?
@ejaypeculados9183
2 жыл бұрын
sir magandang araw po ano kayang sera ng pajero ko 4m40 matic mahirapang tomakbo kahit apakan mo accilerator pidal at hinde na rin gumana ang rom ko at speedo metter ko
@adambmhabuild
2 жыл бұрын
napakaraming bagay o aspeto o bahagi ang dapat isaalang-alang sa problema ng iyong sasakyan, pasensya na hindi ako makakapagbigay ng solusyon para sa iyo. maaari kang magtanong sa isang taong may higit na kaalaman kaysa sa akin. at sorry sa late reply
@happymann839
2 жыл бұрын
👍👍👍👍
@aladinarba2452
Жыл бұрын
Good
@akira5982
10 ай бұрын
Anyone know if this clutch kit is the same as the PD8W L400 Delica 2.8 4m40t
@everlast2658
2 жыл бұрын
How many hours
@adambmhabuild
2 жыл бұрын
This job can be done within a day with slow working pace.
@brunodasilva8579
2 жыл бұрын
Bruno
@kamranakhtar7655
2 жыл бұрын
Bhi jan jo gear oil apne wast kia ha wo to daal do
@ricardonogueira720
Жыл бұрын
👍🖖 show
@ЖекаО-й9ы
2 жыл бұрын
Что за провод на 3:0 ?
@adambmhabuild
2 жыл бұрын
Я не уверен на 100%, что это правильно, но, насколько мне известно, это похоже на провод заземления, так как к этой передаче подключена какая-то электрическая проводка.
@sitisaharamahadi527
2 жыл бұрын
😃👍👍👍👍
@_cedriksoaress_
2 жыл бұрын
🇧🇷👏🏻👏🏻👏🏻🤝🏻👍🏻
@issatraore1772
2 жыл бұрын
Please I would like your help. There is the gear lever of my mitsubishi pajero manual gearbox which shakes a lot on takeoff. It also shakes when I slow down to stop for example. Often also It goes out while I am driving normally 80km/h. The mechanic checked the oil in the gearbox, it was missing, we added oil but the problem persists. He also checked the fuel injector pump but still the problem. Finally he told me that I have to change the clutch disc. Need your opinions please
@filibertoalvarenga3269
2 жыл бұрын
great video my friend, I congratulate you, the oil that falls when you take out the transmission cannon is refilled or remains like that, and in case of refilling, how is it filled, thanks
@Globeglider
Жыл бұрын
Excellent. thanks you for this video.
@鴻陞李
Жыл бұрын
This is the most powerful manual transmission of pajero with the final gear ratio 4.875 and SS4-1! I use 35”tires over 260000km……bad ass!
@fightschoolsageART
10 ай бұрын
What's the name of these gear box?. I need a 3rd gear for mines
@鴻陞李
5 ай бұрын
@@fightschoolsageART v5m31 5speed manual
@antoniforte2208
Жыл бұрын
Great Video! What size of jack stands are you using?
@TheTorkerman
Жыл бұрын
Good vide, I wish it only took 8 minute to do this job
@mohammedferkous4012
Жыл бұрын
He started working in the morning and finished the prescription in the middle of the night but it worked fine
Пікірлер: 47