Wow what a process respect to the creator for a great video. Also I like your comments! Some of them had me cracking up!
@KhaliedRady
5 ай бұрын
شكرا جزيلا استاذنا المبدع... حفظك الرب
@nathenstram6697
2 жыл бұрын
For those who watched this hour long video to not be told the value of these efforts, it's worth about $3000 usd.
@mareecathie2476
2 жыл бұрын
My eternal question is, & I've asked it many times, in many places, how do you identify resin dipped capacitors that contain palladium? I can identify resin dipped tantalum capacitors, but no one answers how you identify the RD capacitors that contain palladium.
@redbaronrefining5322
2 жыл бұрын
@@mareecathie2476 no specific way other than knowing your capacitors by look alone. I usually take a sample of say 10 pieces, weigh them, incinerate, crush, and process to get yield, then add a picture with yield data to my cheat sheet at home. That way I can go after specific grades and save time in the long run.
@mareecathie2476
2 жыл бұрын
@@redbaronrefining5322 Thank you so much for your answer, RB. Sort of sticks a hole in my grand plan :-) I scrap a lot of circuit boards & just sell the chips as I'm not set up to refine. I was hoping I could do the same with them. Thank you, again.
@redbaronrefining5322
2 жыл бұрын
@@mareecathie2476 I do toll refines if you ever want to save some samples, and get yields :)
@william1863
2 жыл бұрын
My God that's a lot of work and to work with those acids ? Not me. Lol
@levimichael1136
2 жыл бұрын
That was a serious amount of propane burned during this video. Awesome video and thank you for showing each step of the process you used.
@OwlTech333
2 жыл бұрын
Actually is quite economical
@levimichael1136
2 жыл бұрын
@@OwlTech333 Economic or not, that was an hour long video, cut and condensed. Those torches were blowin the whole time. All I was saying was that the gas was flowin the entire video.
@merdaslian9606
3 жыл бұрын
Thank you for adding Persian subtitles to the movies
@tinsoffish1810
3 жыл бұрын
After boiling in citric acid to remove excess borax🤔...like a great book,i learn somthing i missed every viewing...thank you😊
@davidbarron107
3 жыл бұрын
wow this is absolutely fantastic..I'd love to be able to do this.fair play to you.amazing stuff
@stevenvelder7534
19 күн бұрын
I like jamming out to the little instrumentals😂
@OwlTech333
19 күн бұрын
lol you are the first one
@ФахитРыжков
3 жыл бұрын
Автору респект!!! Хороший выход!!! За труды лайк!!!!!
@OwlTech333
3 жыл бұрын
Спасибо!
@RizwanKhan-bi1ki
3 жыл бұрын
Excellent yield..
@michahalczuk9071
2 жыл бұрын
That's 3900$ worth of palladium for todays prices. Well done :)
@kevinsteve9453
3 жыл бұрын
Fabulous, will make me work a little more gathering caps. Ty
@OwlTech333
3 жыл бұрын
Good luck!
@mt-wl6oh
3 жыл бұрын
How to Identify Capacitors Containing Palladium?
@ahmadsafi9219
3 жыл бұрын
You are king of the working
@OwlTech333
3 жыл бұрын
Thank you!
@SURFEAMORETERNO
3 жыл бұрын
It was quite laborious but it paid off. You pay for the drinks my master.
@corysamoila
2 жыл бұрын
I came for the metal but I BE HERE FOR THE RAVE!!!!
@MojtabaFatahi-l3s
7 ай бұрын
Dear teacher, I hope your heart is happy and your face is smiling. I was asking you to make a video about the recycling of palladium using the Dimethyglio Oxime method with Farsi subtitles. Thank you.❤❤❤❤
@RadioTexnarTV
3 жыл бұрын
Отличная работа!!!!!!!
@OwlTech333
3 жыл бұрын
Спасибо!
@alexhsabro2028
3 жыл бұрын
Огромная работа. Благодарочка.
@OwlTech333
3 жыл бұрын
Спасибо!
@goranaxelsson1409
3 жыл бұрын
To remove the final led from the palladium, you should add some sulfuric acid after you denox the solution and look for precipitation of lead sulfate. Add more sulfuric acid until there is no more precipitate. That should solve the lead problem for you. The pink crystals in the filter looked like lead chloride to me, the color was probably from something else included in the white needle formed crystals.
@OwlTech333
3 жыл бұрын
Hi Göran! I don't think there's any lead left in the button or at least there shouldn't be since I took three 3 steps to eliminate it before precipitating the palladium: 1st step was the cupellation itself, 2nd step was chlorination (any lead should have precipitated with the silver as the corresponding chlorides from the chilled solution) and the 3rd step was the de-NOxing with sulphamic acid which converts the free nitric acid to sulphuric in situ thus precipitating any lead that made it this far as lead sulphate. With the above said I'm more inclined to think that the XRF gun needs calibration... not sure As for the pink crystals I think it's Vauquelin's Salt ([Pd(NH3)4PdCl4] Lou and freechemist mentioned it on GRF goldrefiningforum.com/phpBB3/viewtopic.php?t=9023#p86042) but again not sure...
@goranaxelsson1409
3 жыл бұрын
@@OwlTech333 Your final XRF reading shows 5.8% Pb. It's a bit much just to come from a badly calibrated XRF. As you say, a chilled chloride solution should precipitate most of the lead and the rest could easily be taken care of by the conversion of sulfamic acid turning into sulfuric acid. But lead chloride takes a while to precipitate, that's why it can form quite long and thin crystals. I suspect that you got so much lead nitrate that the denoxing of nitric acid didn't produce enough sulfuric acid to remove all the lead in that step. But that's just a theory of mine. Putting a few drops of sulfuric into a solution is a cheap and instant way to verify if you have lead in solution or not. And for the few times you got lead it alerts you for a problem that might cost you a lot later on. But if you don't think you have any lead in your final button then you can just disregard all that I wrote. :-) I've never seen Vauquelin's salt as crystals, only read about it in articles and on GRF. I don't know if it forms thin crystals just as lead chloride does. If you still have that filter paper a quick XRF should tell you if it is lead or palladium. Thanks for sharing that video. I have half a kilo of MLCC:s to process in the summer. But I'll probably go the wet chemistry way after incineration. It's worked well for me before.
@OwlTech333
3 жыл бұрын
@@goranaxelsson1409 Thanks! I'll give it a go next time!
@goranaxelsson1409
3 жыл бұрын
@@OwlTech333 I'll wait for the next video. :-)
@alquimiavsmetalica5250
2 жыл бұрын
39:11 the base does not scratch piles jewelry trick when it is at room temperature we will add isopropyl alcohol this will detach the metal from the glass creating a mass to which we will add a powder We will add a similar bolomen of liquid borax, this amalgam will prevent metal from being lost during the fusion and I recommend using a granite crucible with Tesla fusion or induction fusion.
@tawnihaynie1065
3 жыл бұрын
Hi John. Great video Please stay safe and healthy and take care of yourself and your family members. To all members also. Talk to you later my friend. ☺☺☺😇😇😇
@tawnihaynie1065
3 жыл бұрын
Thank you. Cool. ☺☺☺😣😇😇
@huequanganglam1734
3 жыл бұрын
thís ís a rare video , good job .good teacher
@OwlTech333
3 жыл бұрын
Thank you! 😃
@NRF.channel
Күн бұрын
Sir, please make a tutorial on how to extract copper and palladium from wastewater that is given iron.
@احمدالظاهر-ه5ب
Жыл бұрын
مرحبا اخي كم المده التي احتاجها البلاديوم الترسيب بكربونات الصوديوم مع الغليان عمل رائع تستحق التقدير والاحترام
@OwlTech333
Жыл бұрын
15min
@jamisontaylor878
3 жыл бұрын
Thank you excellent video
@OwlTech333
3 жыл бұрын
Thanks for watching
@wimbelmans7245
3 жыл бұрын
specialist verry nice
@7734682
2 жыл бұрын
Thanks super teacher
@atcn1956
9 ай бұрын
Sensacional.Parabéns❤
@OwlTech333
9 ай бұрын
Thank you!
@atcn1956
9 ай бұрын
@@OwlTech333 posso usar o bicarbonato de sódio no lugar do carbonato de sódio?
@OwlTech333
9 ай бұрын
Yes
@dreamcommunications8993
3 жыл бұрын
Good information, thanks 😊🙏
@ronsta2552
2 жыл бұрын
Original, Thanks
@OwlTech333
2 жыл бұрын
Thanks for watching!
@barubarubutterfly
3 жыл бұрын
Saya selalu menyimak. nice job
@OwlTech333
3 жыл бұрын
Thanks!
@fredbach6039
3 жыл бұрын
I'd like to know what happened to the silver. And what the reactions were at each stage. Thx.
@OwlTech333
3 жыл бұрын
The silver chloride was melted with NaOH to silver metal
@jorgelapip4726
3 жыл бұрын
Quero aprender a estrair opaladio eoutros mettais
@theaccountant465
2 жыл бұрын
I’ve seen some poor videos but this takes the crown
@OwlTech333
2 жыл бұрын
Yes in the land of the blind the cockeyed bastard wears the crown
@mahmoodbazmjoo6471
3 жыл бұрын
Thanks
@வேங்கைமைந்தன்
3 жыл бұрын
Excellent
@OwlTech333
3 жыл бұрын
Thanks
@recuptou6433
5 ай бұрын
Nice job ! How many silver at the end of the process ?
@durgaprasadsaini6774
2 жыл бұрын
It is very good
@OwlTech333
2 жыл бұрын
Thanks
@theway674
3 жыл бұрын
You got different music thank you
@hafezjavidy7754
Жыл бұрын
47 grams of pd were obtained from 1.7kg of mlccs?
@OwlTech333
Жыл бұрын
47g was the weight of the button which was 91% Pd therefore 47x0.91=42.77g Pd from 1.7kg MLCCs
@salemcotte
3 жыл бұрын
Where are these particular capacitors found? Great Video!
@OwlTech333
3 жыл бұрын
kzitem.info/news/bejne/y5epx5mvaniLnYY
@Alondro77
3 жыл бұрын
Find yourself a bunch of old circuit boards. Higher end stuff from the 90's and earlier had lots of them.
@hasantokgoz3069
2 жыл бұрын
Sağol kardeşim çok çok çok teşeķürlér ediyorum size birşey sormak istiyorum bu palladyumu pilastikleri erintikten sonra ateşte bunun tozunu ayırdan sonra nittrik asitdeni direk potada eritsek olmazmı sağol canım kardeşim kolay gelsin sana teşekürler
@serkandusmus
6 ай бұрын
Plastik derken
@Nik75MiR
Жыл бұрын
Респект 🔥🔨😎👍🚩📽️🌵💰🌐💥
@flyguille
3 жыл бұрын
It is easier to crack them open as if it walnut, that way it is way less useless material for start.
@Le_cuisinier.du-chienne
3 жыл бұрын
How much did you sold it?
@RudolphWhite-cl4qy
6 ай бұрын
ARE THEY BUYING BACK CERAMIC CAPITATORS CONTAINING PALLADIUM?..HOW MUCH DO YOU NEED TO SELL BACK?..
@hsenaid8431
3 жыл бұрын
احسنت النشر جيد ترجمة الفديو للعربية
@lancemenke2728
2 жыл бұрын
Your torch tip that hot can pop and all palladium lost instantly. care full
@OwlTech333
2 жыл бұрын
noted
@julioponta2210
3 жыл бұрын
Parabéns 👏👏👏👏
@sixroldan6742
3 жыл бұрын
Wait, I thought it was only the blue and yellow capacitors that had palladium in them....?
@OwlTech333
3 жыл бұрын
Not at all, there are many others containing Ag, Pd and/or Pt
@matthewhatch9141
2 жыл бұрын
@@OwlTech333 is platinum in all ceramic capacitors.
@ozcanozcelik6625
2 жыл бұрын
I love watching your videos. I would appreciate it if you make a video on tin mine recovery from electronic cards. I wish you many successful days in your life, greetings from Turkey.
@royalrefining6182
3 жыл бұрын
What a great yield. Good stuff mate 👌
@OwlTech333
3 жыл бұрын
Thanks pal!
@sheilaboothroyd4293
2 жыл бұрын
Why do you need to put silver in? Banging tune.
@OwlTech333
2 жыл бұрын
This particular capacitors contain pd and ag adding more ag lowers pd's melting point even further
@sheilaboothroyd4293
2 жыл бұрын
I might of missed it but how much is it worth.??
@OwlTech333
2 жыл бұрын
43.4g Pd x $56.3(today's spot price) = $2445
@sukmamanunggal4957
3 жыл бұрын
Close listening.... Steady... 👍👍
@luiscosta4973
2 жыл бұрын
Exelente 👍
@OwlTech333
Жыл бұрын
Obrigado 👍
@luiscosta4973
Жыл бұрын
Gracias,a tu canal, aprendemos,y aves enseñamos,,👍🇺🇾🌍
@joelconceicaogoesdemelo1478
3 жыл бұрын
Gostei eu só deixava guardado os componentes de ouro e prata guardado em garrafas.
@nm-series-nm
3 жыл бұрын
Hy how are you brother your videos is very important to me
@OwlTech333
3 жыл бұрын
Hi! Very well, thanks for asking and watching!
@احمدالظاهر-ع3ظ
Жыл бұрын
مرحبا هل يوجد كاشف الذهب من اكوريجا غير كلوريد القصدير وهل يمكن ترسيب ذهب بنتريت الصوديوم
@snehasischakraborty7748
3 жыл бұрын
Hi, can i use sodium formate instead of using formic acid and sodium carbonate separately??
@OwlTech333
3 жыл бұрын
Yes, even better
@thecentralscrutinizer5105
3 жыл бұрын
_"...and remember kids, DON'T TRY THIS @ HOME!"_ ~Fire Marshall Bill
@joyowarsito4721
2 жыл бұрын
L
@ok-ahsungestreift3031
3 жыл бұрын
What happens with the lead oxide vapor? I would imagine that it will affect health very negative after some time of exposure. How can u make sure to not be slowly poisoned by the lead fumes. Thank you. I would appreciate an answer! Kind regards🖐️
@OwlTech333
3 жыл бұрын
Simple: Wear a mask. Take a shower when finished and don't forget to wash your clothes.
@alfredweaver5390
2 жыл бұрын
I would suggest making a vent hood with a high cfm volume for drawing away the fumes into some sort of exterior filter box outside the building you’re doing this in. PPE, such as painters respirator, rubber smock, full face shield and nitrile gloves are a must in any caustic process.
@charlieb9502
2 жыл бұрын
Took some big chances there, adding the silver contacts from relays that could have contained selenium could have really cause some problems. Also doing pallium group metals is dangerous. As you can get pantinosis and that will be fatal.
@corysamoila
2 жыл бұрын
Please go on. I'm thinking about doing this. What should I look out for?
@corysamoila
2 жыл бұрын
So dont melt metals together, check. Do not get fiberglass in molten, check Always have ventilation, check A mask? Clothing? Stay away from? Anything helps thx
@ahmadsafi9219
3 жыл бұрын
Is it possible to specify the names and quantities of the materials used?
@dizzious
2 жыл бұрын
He did in the video.
@edwardhughes352
3 жыл бұрын
nice video
@OwlTech333
3 жыл бұрын
Thank you!
@Mr.Intellectual
Жыл бұрын
@MiguelSierra
3 жыл бұрын
Excelente.
@radiocomponent
3 жыл бұрын
Грамотно сделанное купелирование.
@OwlTech333
3 жыл бұрын
Спасибо!
@andreathebest1986
3 жыл бұрын
Купелірування зі свенцем на паладій не роблять це помилка треба робити тільки з сріблом і буру кідати не можна тільки сода тоді гарний результат буде
@radiocomponent
3 жыл бұрын
@@andreathebest1986 Я з 78 року цей варіант знаю а ти напевно тоді ще не народився. Пошукай в Гоглі ось по цій назві Гидрометаллургический способ отделения золота, серебра, платины и палладия из содержащего их материала с одновременным их обогащением, преимущественно из сплава "доре" також пошукай що таке сплав Доре на основі свинцю
@andreathebest1986
3 жыл бұрын
@@radiocomponent не знаю як ви але головна проблема людини що вона все знає а насправді це ілюзія знань. купеляція проводиться не правильно купель з порт цемента це поганий варіант потрібно гріти купель а не сам сплав і подавати окислювач на сам сплав тобто кіслород тоді і метали бистро окисляютьса такщо з 78 року ви нічого не навчилися
@yuryandy861
3 жыл бұрын
@@andreathebest1986 заранее извиняюсь, если вдруг чем обижу, но диванных экспертов как всегда хватает 😁 цемент хуже чем заводская капель с магнезитового порошка, согласен, а вот насколько хуже в процентах например наверное ты знаешь, как знаешь наверное и как сделать магнезитовые тигли на коленке ))) но есть ещё более лучший вариант, предки например делали тигли из золы костей животных 😉 может лучше коров разводить что бы иметь суперклассные тигли... А про иллюзию полностью согласен, знать и уметь разные вещи, автору респект за УМЕНИЕ, знания тут недостаточно будет.
@ANDRYRUSWANDI
3 жыл бұрын
Nice
@OwlTech333
3 жыл бұрын
Thanks
@kevinauld6809
3 жыл бұрын
Jun 25 just ran across this have not seen any thing from you in it seems like a year!
@OwlTech333
3 жыл бұрын
6 months to be exact, been busy with side works. I've prepared a lot of videos though
@cahcengoh09897
2 жыл бұрын
how many add silver
@OwlTech333
2 жыл бұрын
10% of the added lead
@carlosharanki7872
2 жыл бұрын
Buen día desde Venezuela...sabes como procesar Pd en estado natural...en piedra?...saludos
@OwlTech333
2 жыл бұрын
hola nunca lo probé
@pauldavidhaynes8243
2 жыл бұрын
Are them the ceramic tiles at power sub stations, that divide the metal disc things. Sorry my electrical engineering knowledge is a little lacking.
@franzliszt3195
2 жыл бұрын
So I have a bunch of ceramic capacitors. I was going to throw them away! But what do I do with them? I am much to frightened to do this process.
@esamgold5524
3 жыл бұрын
Hi my friend. Can you use natric aside directly after burn and granid. Thanks
@OwlTech333
3 жыл бұрын
I suppose so, yes
@bakulrongsokberkah9741
3 жыл бұрын
Good sir
@OwlTech333
3 жыл бұрын
Thank you!
@erdalinci5942
2 жыл бұрын
iyi izah..
@tomaszchmielewski8323
3 жыл бұрын
Wouldnt it be more easier to pour the calcined ground ash into aqua reqia then wash it few times and boil off the water or add some chemicals to precipitate palladium ?
@OwlTech333
3 жыл бұрын
I find this way easier
@cditzler6313
3 жыл бұрын
at $50.32 a gram thats a nice cup of coffee for a days work :) hit it with a owl tech stamp and sell it for 3.1k
@OwlTech333
3 жыл бұрын
Great idea!
@bahaasaed7602
2 жыл бұрын
ممكن اعرف لماذه تستخدم حمض الكبرتيك
@delljopshorseracingtips4693
2 жыл бұрын
Who would you sell it to
@OwlTech333
2 жыл бұрын
Already sold
@lahorigoldsmith8570
3 жыл бұрын
excelant
@MohammadrezaErfani-f8b
7 ай бұрын
ضمن تشکر از استاد ،اگه مدت زمان پلانهای واکنش کم باشه بسیار عالی خواهد بود
@lamamriaissa1165
3 жыл бұрын
why not use the chemical method, it is easy and cheaper
@OwlTech333
3 жыл бұрын
because this method is easier and cheaper
@joserobertobrito1361
2 жыл бұрын
Gostei muinto aprendi mais um polco, quero saber mais . Sobre pratina e ródio
@rookierollhunter8652
2 жыл бұрын
Awesome video as usual! How much silver was added and then reclaimed?
@OwlTech333
2 жыл бұрын
about 200g contact points, which is about 160g Ag
@joserobertobrito1361
2 жыл бұрын
Quero saber como decanta a pratina o ródio , opaládio eu vi como faze . E quais os metais devo decanta primeiro
@jaimejuarez2384
3 жыл бұрын
Qué grado de pureza tiene?...
@OwlTech333
3 жыл бұрын
58:14
@jaimejuarez2384
3 жыл бұрын
Gracias..
@sejaoseumelhorsempre2552
2 жыл бұрын
Toda essa trabalhera,gás e ácidos pra essa mixaria??não vale a pena né!
@Avci__
3 жыл бұрын
Did you add sulfamic? Wow, what minute?
@OwlTech333
3 жыл бұрын
@12:12
@Avci__
3 жыл бұрын
@@OwlTech333 Thanks
@jirisiska1784
3 жыл бұрын
Hello, if I burn the PCB boards withhout separation all the parts on it, is possible use the cupellation process? and if yes can I get all the precious metals like Au, Ag, Pt, Pd, Ta, and others? thank you for your answer
@OwlTech333
3 жыл бұрын
kzitem.info/news/bejne/taqsk6WCsYakbGU
@jirisiska1784
3 жыл бұрын
@@OwlTech333 thank you
@dizzious
2 жыл бұрын
How much borax and sodium hydroxide NAOH did you use?
@OwlTech333
2 жыл бұрын
Didn't measure, around 200-300g NaOH and 100g Borax
@msmail8133
3 жыл бұрын
Amazing How long it took to processing for all ? Tnx
@OwlTech333
3 жыл бұрын
A day's work in total
@earlwright9715
3 жыл бұрын
About $3500 for a days work?
@rightvideos5057
2 жыл бұрын
Shell i use HF+ Nitric to dissolve the dore directly without cupulation
@OwlTech333
2 жыл бұрын
Don't!
@alibozkurt8491
3 жыл бұрын
Hello what are the chemicals used in order of use Hello what are the chemicals used in order of use information verirsen
@shannonlehmann2057
2 жыл бұрын
bro where can i download that BANGER of a song?
@OwlTech333
2 жыл бұрын
Which one?
@OwlTech333
2 жыл бұрын
m.soundcloud.com/owl-tech
@shannonlehmann2057
2 жыл бұрын
@@OwlTech333 THANK YOU BRO! Something Big is absolutely AMAZING
Пікірлер: 479