Lincoln your going fast enough, please, for my sake, and I'm thinking I'm not alone, ACTUALLY PREFER your videos because of how much of it all you bring us to learn and know. I for one really like hearing all the comments prior during and after your work... that's you and why I follow you!
@PaintonPlasticbyLincolnWright
4 жыл бұрын
Oh wow, thank you very much for the supportive comment Aviv!! Sincerely appreciated. ^^
@squattinggopnik8514
5 жыл бұрын
I didn't know about this scribing tape. Thank you this will help me immensely.
@PaintonPlasticbyLincolnWright
5 жыл бұрын
Most welcome!
@EvilhomerNZ
5 жыл бұрын
Great little walkthrough Linc! This was a super helpful basics video! What I do want to say is that I'm continually amazed that you share techniques you're not super great at. It's refreshing for someone to admit they're not pro at everything and openly admit it's something you're working on yourself. So cool! I'm far more interested in people who are authentic and you 100% are! Thanks mate!
@PaintonPlasticbyLincolnWright
5 жыл бұрын
Thanks a bunch and yes, I think it's good to show that reality - we aren't all great at everything and my skill set is deep - BUT only in certain areas, the rest I am learning and looking to improve. Thank you very much for the positive feedback. ^^
@asdf9890
9 ай бұрын
You admitting lack of skill in this area, makes it feel more like I can do it too, thanks!
@Porco1984
5 жыл бұрын
I'm glad to see that I'm not the only one struggling with panellines ;) Great tip/demonstration with that thick tape, I've freehanded my panelline repairs up till now and it's always super scary... I will definitely try to find a similar product and try this technique :D
@PaintonPlasticbyLincolnWright
5 жыл бұрын
Thanks and yes, this is a nice, easy and simple first step.
@veedubb67
5 жыл бұрын
Been using Dymo Tape for years to rescribe panel lines. Never heard of Scribing Tape - Thanks Lincoln!
@PaintonPlasticbyLincolnWright
5 жыл бұрын
Yes exactly, Dymo tape is great and the standard for many people but you will laugh, this stuff actually works out cheaper for me to buy. Doesn't happen very often does it? ^^
@chancerNW
5 жыл бұрын
Good video. I'm re-scribing a 1/72 Antonov 74 with entirely raised panel lines. I use number of scribers I like a pin in pin vice then resharpened on stone to a wedge. Dymo tape used for labels works well as scribing tape.
@PaintonPlasticbyLincolnWright
5 жыл бұрын
Yes, classic old school is great.
@lalouxfrancois
5 жыл бұрын
one tool is VERY good: the scribing tool from trumpeter... yes it is :)
@iceleon25
5 жыл бұрын
Glad to see that your tutorials are coming back. Kinda bummed out that it became a patreon exclusive cause I really can't afford the monthly subscription because.. life. Although I try my best by watching the ads in your videos.
@PaintonPlasticbyLincolnWright
5 жыл бұрын
Thanks and same here, I just can't afford to do them all for free. Because... life! Giving away half my life's work for free seems like a pretty cool thing to do though right?
@rafalemiec8683
5 жыл бұрын
Cool technique. Had no idea about that kind of tape. Butt: I would advise people to drop x-acto knives in favor of the OLFA AK-5 Scalpel - it comes with a sharp stylus, plethora of spare blades of excellent sharpness, a neat holder for it, and it's just my favorite tool for cutting and carving. It would've helped a lot with what you were doing with the duller knife and the blade's dull edge. Oh and the beast feature: it has MADE IN JAPAN written on it ;)
@thehangarbay
5 жыл бұрын
Sujiborido sells some really nice tungsten-tipped chisel with varying widths. These are great and you may want to look into them for future scribing tutorials. They also sell stepped chisels for an easy way to transform a seam into a panel line.
@PaintonPlasticbyLincolnWright
5 жыл бұрын
Thanks and yes, I know the guys at Sujiborido and will eventually get some of their excellent chisels and add a new skill to the Big Book of Linc's Magic - so much to learn on this journey. ^^
@ascensionindustries9631
5 жыл бұрын
Great video Linc. I've been tryin to learn custom armor plating, scribing, an airbrushing on one kit. I have already screwed up and had to replace the kit, FedEx lost my spray booth, and I broke my hand. This build is taking forever to say the least.
@PaintonPlasticbyLincolnWright
5 жыл бұрын
Oh noes, that's terrible. Please get well soon and good luck on the custom scribes.
@douglascampbell9809
5 жыл бұрын
You will make it. I did a scratch build job that took a year and a half. A third of the way through I ended up in the hospital with blood clots all through my lungs. Dr said it what I had usually kills people I'm on meds for life to keep it from happening again. I had to take about 3 months off during the build.
@PaintonPlasticbyLincolnWright
5 жыл бұрын
oh wow, take care Douglas, glad we still have you with us!
@PaintonPlasticbyLincolnWright
5 жыл бұрын
Get Members Only Content! By becoming a Paint on Plastic Brobot Member you support our show to continue producing content on KZitem and you also gain access to members only Patreon exclusive content and swag! www.patreon.com/paintonplastic
@vindivergilio3482
3 жыл бұрын
Great, helpful video. Thank you. I am currently building a 1:25 scale model of FDNY's Rescue 1 from scratch out of sheet styrene. There are a total of 32 compartment doors on the body of the truck that have to be scribed into the plastic. Pretty straight forward squares and rectangles. It's also the first time I'm doing this type of detailing. Any advice (besides take up a new hobby, lol???). Thank you for the video.
@PaintonPlasticbyLincolnWright
3 жыл бұрын
Wonderful project but that's out of my skill level, have fun!
@parpar6483
3 жыл бұрын
Hi sir im a beginner in scribing..what is the right order to do?paint then scribe?or scribe then paint?thank you
@PaintonPlasticbyLincolnWright
3 жыл бұрын
scribe then paint, good luck!
@parpar6483
3 жыл бұрын
@@PaintonPlasticbyLincolnWright another one sir..do you recomment to do custom paint and the same time fixing seam line?
@iceleon25
3 жыл бұрын
@@parpar6483 fix seam line first then primer. If the seam is still there, redo it
@thebigbient8736
5 жыл бұрын
No BMC chisles linc sensei?
@PaintonPlasticbyLincolnWright
5 жыл бұрын
Yes, that's the next upgrade I think!
@aaronsimons7612
5 жыл бұрын
Nah, you’re doing it all wrong Linc 😜 Needs more zooming 😜
@PaintonPlasticbyLincolnWright
5 жыл бұрын
haha, I still can't UNSEE that! Surely you are burning the plastic going that fast!
@lanesteele240
3 жыл бұрын
Embarrassed, i thought you were talking panty lines.
@perthzakugirl6288
5 жыл бұрын
Get to the point? naaaah I like waffle Linc best
@PaintonPlasticbyLincolnWright
5 жыл бұрын
haha, yes I am thinking that I just gotta be "Linc" right? Thanks a bunch J!
Пікірлер: 37