Thank you again. I didn't realise how powerful the parameters are. Will be having a look into how to use them in my future drawings.
@LearnEverythingAboutDesign
2 ай бұрын
Glad it was helpful!
@mo_adventures
10 ай бұрын
Thank you so much for making this video! It’s exactly what I was looking for!
@LearnEverythingAboutDesign
10 ай бұрын
Glad it was helpful!
@ChrisOndrovic
7 ай бұрын
Great video explanation is easy to follow, would you consider doing a tutorial on a Planar Index Joint (might be the wrong term) but there are a couple of videos of them being shown
@LearnEverythingAboutDesign
7 ай бұрын
Great suggestion! Do you mind linking me to a video on the topic?
@ChrisOndrovic
6 ай бұрын
@@LearnEverythingAboutDesign I tried to reply a couple of times but for whatever reason they didn't post kzitem.infokPQaCk-VqMw
@LearnEverythingAboutDesign
6 ай бұрын
@@ChrisOndrovic That is odd. YT doesn't like links sometimes, even to their own site :) you can always email me support@caducator.com too. I see that is a cool joint! I won't how long that ball end bit would last.
@tonysmith7702
Жыл бұрын
Very nice explanation.
@Edouard03
6 ай бұрын
Hey, exactly what i was looking for ! well made video. I chose to simply download from the updated link you gave since i dont really know my way in design and fusion but everytime i change the values only 1 teeth remains and i cant seem to fix it.
@LearnEverythingAboutDesign
6 ай бұрын
which values are you trying to change?
@Edouard03
6 ай бұрын
@@LearnEverythingAboutDesign ID OD and number of teeth and teeth angle
@LearnEverythingAboutDesign
6 ай бұрын
@@Edouard03 I just tried some variations with this file a360.co/3i9ne8w and it worked. I changed the OD to 150. the ID to 100, the HirthAngle to 65 and the number of teeth to 60. all updated ok. if you let me know the numbes you are trying i can see if they work for me.
@Edouard03
6 ай бұрын
@@LearnEverythingAboutDesign I messed around a bit and it seems to be the ID causing issues, i need the ID to be 6.1 mm but the lowest i could make it work is 14mm, anything smaller breaks it
@LearnEverythingAboutDesign
6 ай бұрын
@@Edouard03 If you expand the sketches, sketch 12 defined the hole in the middle which is currently set to 24mm. The design wasn't set up to be able to go that low so you would need to dive in a bit deeper. Sketch9 defines an offset value for the tooth cut and it used an arbitrary offset number of 3mm to make sure it extended far enough. The problem when you make the ID so small is that it now crosses the axis of revolution which it really doesn't like. What might be easier if you just need a 1 off is to get the ID and OD to a larger multiple of what you need, and scale the whole thing down. Say you make it 18.3mm ID then scale it down to 1/3 the size.
@magnehoiberg
7 ай бұрын
toothangle formula gives me an error all the time, can you post a copy off yours, so i can check what i am doing wrong?
@LearnEverythingAboutDesign
7 ай бұрын
The download file in the description should have it no? There was an updated to Fusion after this video was made where more parameter functionality was included so ill have to give a shot on my end as well and get back to you if I have problems.j
@Jazzersize
Жыл бұрын
Hirth angle, Hirth angle, oh won't you be miiiine?
@LearnEverythingAboutDesign
Жыл бұрын
ahahah. That instantly takes me to back to the future. I am your density, uh destiny
@lilstorm1879
Жыл бұрын
Can you make a widebody kit for a 2014 chevy cruze
Пікірлер: 20