I've been in car audio and was in competition like over 20 years back and the honky poor installs I've seen Jeez. Point You are at a level that is mouth dropping WOW
@SoundsGoodStereo
2 жыл бұрын
Thanks!! We appreciate it!
@mauryamckendrick5446
2 жыл бұрын
I don't know if anybody watching has ever had the awesome experience of being able to listen in person to a system like this one before, but Focal components driven by Masconi amps with a properly tuned DSP with time alignment and running full active and all the sweet thing you can do with DSP's now. If you have not then you need to find a way to hear it!! I have done all sorts of installs with name brand equipment and same type of setup just different brands and what is in this Bronco is on a different level all together!!! There is no way to explain it you have to experience it to understand. This equipment is not what some would call "cheap" by any means!! But it is a prime example of you get what you pay for!! Personally I think it's worth every penny to have this stuff to enjoy everyday but who am I and what do I know!!! LoL
@SoundsGoodStereo
2 жыл бұрын
Love it!! You are correct, until you experience a system properly tuned with great gear, it's hard to explain how it sounds. Thanks for checking out the videos!!
@dna59
2 жыл бұрын
I love how you take us through the entire journey from start to finish and all aspects it entails.
@SoundsGoodStereo
2 жыл бұрын
Glad you liked it!! We are trying to become better "KZitemrs", and glad you enjoyed this style of video!
@audiogod2929
2 жыл бұрын
these guys have up the game.
@CarStory
2 жыл бұрын
I love the sound insulation material in the doors. Watching you do it makes me want to try it.
@gregn3615
2 жыл бұрын
Thanks for taking us on your brainstorming journey! I really appreciate seeing how it evolved from a paper cutout to almost finished product. Can't wait to see it finished!
@SoundsGoodStereo
2 жыл бұрын
You are so welcome! We will have photos on our Instagram too as some things we did not capture on the video series due to our crazy deadline.
@bc8Sooners
Жыл бұрын
Just found this channel, you guys are so meticulous and detailed, my OCD is liking it.
@SoundsGoodStereo
Жыл бұрын
Thanks!!
@mr.ford-man4481
2 жыл бұрын
So badass! Don and the crew at Sounds Good are AWESOME!
@SoundsGoodStereo
2 жыл бұрын
Thanks!!!
@bobbybarnett4636
2 жыл бұрын
This is a great video series, showing off you guy's mad skilz! Two questions: First, I see you sell the white paint protection film (as mentioned in a previous comment). Do you also sell the green carpet protection film? I truly understand the challenges of removing metal shavings and wire trimmings from carpet...ugh! Second, I usually use Super77 and Super90 for carpet and vinyl adhesion to the box, but I noticed you had much more latitude in time and motion on your glue. Is it heat activated? How does that work? What is it?
@rob1bmf976
2 жыл бұрын
I like the way you maintained the factory push in tabs on the dash....great work
@SoundsGoodStereo
2 жыл бұрын
Thanks
@bencook8109
2 жыл бұрын
This build is insane!! Doesnt surprise me though with you guys!!! 👍👌
@SoundsGoodStereo
2 жыл бұрын
Thanks Ben!! We need to get you over here to listen to one of these builds. It's beyond words even for us!! Have a great weekend and enjoy the videos!
@bencook8109
2 жыл бұрын
@@SoundsGoodStereo absolutely! Gina is waiting on her new car to be built, BMW M5 competition. We will bring that thing over and have you look at that and I can check out some of these new builds!!
@SoundsGoodStereo
2 жыл бұрын
Perfect!! Awesome car!!
@jsmoothFL
2 жыл бұрын
Sweet router table man!!! Love all y'alls work.
@SoundsGoodStereo
2 жыл бұрын
Thanks!
@jovenlara5868
2 жыл бұрын
Amazing video, thank you...what about the FPX Focal amplifiers? Is there much difference (sound wise on the full range channels) between the 5.1200 and the 4.400 SQ?
@Defyfate11
2 жыл бұрын
Need help in coming up with an upgrade for the 2021+ Bronco with the B&O system. My plan is to buy the Kicker 200.4 and 500.1 amps and then upgrade all the factory speakers. I want to go with Focals you used for the front but I would need the custom bracket you guys made and feedback if those speakers would sound good on a low power performing amp? Not even sure that the Kicker 200.4 is good for the B&O setup???
@SoundsGoodStereo
2 жыл бұрын
The best speakers will always sound better, even on minimal power. Don't assume they will not sound good without power, but the question is would you get your moneys worth on low power...
@nbeman923
2 жыл бұрын
You all do some of the best work in the industry. That a cool router table what’s the brand I like how easy it is to adjust?
@SoundsGoodStereo
2 жыл бұрын
You can go to mobile solutions website, they have several good options for routers. Thanks for checking out the video
@nbeman923
2 жыл бұрын
@@SoundsGoodStereo Thanks for the reply i hv the one from Mobile Solutions I just like the adjustment of the router lift that you were using. I found it on line. Keep up the awesome videos.
@nickorozco5933
2 жыл бұрын
Nice 👍 work. Where do you buy the sound deadening material?
@SoundsGoodStereo
2 жыл бұрын
Here you go: soundsgoodstereo.com/collections/multi-layer-mat-cld-sound-treatment/products/blackhole-mat-self-adhesive-three-layer-4-5mm-thick-damping-material-per-sheet
@Defyfate11
2 жыл бұрын
Curious on the sound treatment product, I was leaning towards DynaMat but need the best for stretching into hard conturs of my new bronco. Is there a reason why you use BH products instead?
@SoundsGoodStereo
2 жыл бұрын
Alot of good sound treatment products on the market. We chose the BH due to the three layer design, easy to conform and we have confidence it will not melt over time in the vehicle. It's one of the only products that become permanent in the vehicle and we have been using the BH product for years without any issues, weird smells or complaints.
@Defyfate11
2 жыл бұрын
would it be beneficial to use sound deadening on the A pillars and center overhead console area while I have everything removed in my new Bronco? I tore it apart to hardwire my Garmin Overlander Navagation, Thinkware 1000, and Radar along the A pillar and overhead console.
@SoundsGoodStereo
2 жыл бұрын
No, not much benefit on those areas. You really want to focus on large areas of thin metal for the sound treatment
@desmondgreen4135
2 жыл бұрын
How much does it cost for this system and install
@SoundsGoodStereo
2 жыл бұрын
$30k
@UneducatedPhotographer
4 ай бұрын
You guys don't sell any pieces for the dash?
@SoundsGoodStereo
2 ай бұрын
No, it's not something we are entertaining at the moment. Many other people took this video / idea and created their own versions.
@igorgonemad5361
2 жыл бұрын
Where do you get that protection film at?
@panchisco21
2 жыл бұрын
Are kick location seald enclosure or ib
@SoundsGoodStereo
2 жыл бұрын
Seems to be loosely sealed based on our measurements using the SMD impedance tool. They are actually really good locations compared to traditional doors.
@sean9267
2 жыл бұрын
Holy crap. Do I want to know how much this would cost?
@SoundsGoodStereo
2 жыл бұрын
Hard to calculate as the next one one not take as long. But assume $30-60K to replicate and if we do three at the same time, expect closer to the 30K mark.
@oliverchumleyjohnson7070
2 жыл бұрын
Are you selling your templates for the dash speakers
@SoundsGoodStereo
2 жыл бұрын
Maybe... We have parts on order from Ford, so once we receive them and build a set, we will see what it costs.
@oliverchumleyjohnson7070
2 жыл бұрын
@@SoundsGoodStereo sounds great. Definitely interested in doing the mid and tweeters on the dash. That came out super clean
@Defyfate11
2 жыл бұрын
@@SoundsGoodStereo I am also interested in front dash speaker template
@joshuaguthmann4383
2 жыл бұрын
I'm also interested in the templates.
@Watchingyou-daily
2 жыл бұрын
On the left and right grills I would drill out the other holes.
@SoundsGoodStereo
2 жыл бұрын
Seems like that would work, but it’s easier to use our laser so we can make all three grilles match.
@loudelvis610
2 жыл бұрын
And that's why custom costs big money...so much trial and error....eats up so much time...even with laser.....nice
@dunnrite8299
2 жыл бұрын
U can use the magnetic terminals for the doors!!! 🧐
@SoundsGoodStereo
2 жыл бұрын
We chose not to drill into the truck and at the end of the build, the extra mid-bass was not needed with the Mosconi DSP Phase C setting along with the particular subwoofers we used. We were able to play them up higher than normal to reenforce the mid-bass response.
@chrisnas1483
2 жыл бұрын
I wonder, what's correctly.. I would think some other company/installer would/could do it? I guess he didn't wanna cut his doors...
@SoundsGoodStereo
2 жыл бұрын
Correctly would be to order different chassis wiring for a different Bronco that has unused pin locations. Any other option we found would go against what we do. I’m sure you will see people grab a drill and start doing some interesting things, but we respect the vehicle/client and will only do it the factory way.
@chrisnas1483
2 жыл бұрын
@@SoundsGoodStereo nicely stated... 👌
@clintcaldwell7232
2 жыл бұрын
Could you bluetooth door speakers?
@audiocreations
2 жыл бұрын
Awesome awesome awesome !! Please get you a router shield 🛡… your fingers are to valuable to lose!!
@SoundsGoodStereo
2 жыл бұрын
Appreciate it!! Thanks for the support and feedback.
@PureToneMusic
Жыл бұрын
This has to be at least $7,500. I'm looking for the cheapest way to make my stock bronco system not suck ass cheeks.
@SoundsGoodStereo
Жыл бұрын
We have some parts on our site that can help you along. soundsgoodstereo.com
Пікірлер: 62