VOICES OF INSPIRATIONS AND CIVIC EDUCATION.
In the previous video I did not succeed to fix my gear selector module. I promised to come back with a second video as part 2 of my project and see what is the issue. I managed to trace the problem on the same very day and I fixed the gear selector module. The problem was that the small motor on the side of gear selector was having wires which were having damaged insulation. Short circuit was complicating the electrical systems. The other thing that cause the gear shifter problem is the main terminal was which comes from the console to the gear shifter module. It doesn’t hold the terminals properly. So when you take it off and put it back half way, sometimes it fixes the problem. If the car has clogged fuses due to hash weather, it can can cause the problem too. Instead of buying new fuses it’s better to clean them up with the soft sand paper.
Know that if your Mercedes Benz is fixed with the problem of gear shifter module, there is no need to erase codes in the ECU or to do any setting to unlock the LIMP MODE. After fixing and fitting it back, you switch the ignition on to the second position, the car will reset itself just give it some seconds and it will be ready for riding again. This applies to the gear selector module only BUT NOT to the conductor plate in the gear box or other factors that cause LIMP MODE.
Music by James Madalitso Mchenga the author.
Негізгі бет PART 2 GEAR SHIFTER PROBLEMS W203 / W204 MERCEDES BENZ C CLASS FAILURE AND FIXING
Пікірлер: 58