Part 2 of Modification, Adjustments and Tuning
3. Magazines:
a. Marking the magazines for recognizing the last projectile
b. Magazine holders tightening
4. Striker:
a. Polishing the striker spring and the striker
b. Making guiding pin for the striker spring
5. Cylinder
a. Depinger: 30mm
b. Polishing the cutting edges of threads at both ends
6. Filling valve
a. Adjusting, untightening the countersunk screw holding the o-ring
c. Positioning of the manometer
7. Firing valve
a. Adjustment of the retainer of firing valve, and scaleing
b. Polishing the needle
c. Firing valve spring retainer adjustment for the lower pressure work
8. Regulator:
a. Polishing piston and spring washers of the regulator
b. Finding the appropriate working pressure for the regulator (95bar)
c. 4mm adapter of gauge for measuring the pressure after the regulator
d. Increasing the volume of pre-chamber through drilling the spacer
See all parts of KalibrGun, Cricket tuning videos:
Tuning part 1 - • Part 1 Kalibrgun Crick...
Tuning part 2 - • Part 2 Kalibrgun Crick...
Tuning part 3 - • Part 3 Kalibrgun Crick...
Tuning part 4 - • Part 4 Kalibrgun Crick...
My channel: / freemanshooting
Негізгі бет Part 2 Kalibrgun Cricket .22 Modification, Adjustments and Tuning
No video
Пікірлер: 58