First time I've watched a video where the retro computer has been made more yellow than it was in the first place 🙂
@TheRetroShack
2 жыл бұрын
I like to throw a curve ball every now and again :) :) :)
@MikeyGRetro
2 жыл бұрын
Alot of attention to detail has been put into this. Nice one. Personally I would of chosen the grey you briefly showed. Good to see another A1200 restored.
@TheRetroShack
2 жыл бұрын
The yellow has grown on me but I did have an ‘oh no!’ moment when the first coat went over the grey :)
@wimwiddershins
2 жыл бұрын
I really thought the painting and decal approach was going to be a mess, but its really good. Well done mate.
@TheRetroShack
2 жыл бұрын
Thanks - I must admit going in I wasn't confident, but the trick is not to rush and just be REALLY patient with everything :)
@bazza5699
2 жыл бұрын
must admit I cringed a bit too but seeing the final result is very impressive.. i bet it took hours to get that lettering on.. total respect.
@emmettturner9452
2 жыл бұрын
@@TheRetroShack Was hoping you’d clear-coat them once done but they do look good for now. :)
@TheRetroShack
2 жыл бұрын
@@emmettturner9452 I did :) Just stupidly didn’t mention it :)
@TheRetroShack
2 жыл бұрын
@@bazza5699 Thanks matey!
@ernestuz
2 жыл бұрын
You could have painted it in phosphorescent green, and told your friends it's an Amiga rescued from Chernobyl!
@TheRetroShack
2 жыл бұрын
Like green would have been a better fit with the Shack’s title font? Darn!
@BrunoFonsecaPT
2 жыл бұрын
The work you did on the keys is mental. Came up much nicer than I would expect. The case color… well… let’s just say I’m glad to see another Amiga restored :D. Well done!
@TheRetroShack
2 жыл бұрын
Thanks! It's a controversial choice I know - but it's SOOOO sunny! :) :) And yes, the keys were a struggle :)
@kevinshumaker3753
2 жыл бұрын
@@TheRetroShack Depending on if this is a 'trailer princess' or 'overland' machine, I might have done some kind of clear coat over the keys, to prevent blistered and bloodied fingers in the future. Really excellent job, especially if you use the melted case for another project that requires a hole back there, or want to play with patching with an epoxy resin...
@TheRetroShack
2 жыл бұрын
@@kevinshumaker3753 Yep - I did a clear coat - just forgot to mention it :(
@stephenelliott7071
2 жыл бұрын
Yes, why not retrobrite?
@dominikbehr2863
2 жыл бұрын
Very nice job. And do not worry about modifying Amigas. There is probably no unmodified Amiga left in the world. Everyone who owned Amiga always modded it because there were accelerators, expansions, RTC modules, PCI boxes. People were putting them in tower cases and always took them beyond the limits.
@TheRetroShack
2 жыл бұрын
How very true!
@imnickleonard
2 жыл бұрын
I’ve never considered spraying. You’ve a lot of patience. I’d have wanted all coats and for the keys to be dry in 10 mins. And the yellow? Love it !!!
@TheRetroShack
2 жыл бұрын
Yes - patience was definitely the key here :)
@combatdigiq
2 жыл бұрын
I appreciate the irony of the fact that you now undoubtedly have the most yellow amiga ever. 😂
@TheRetroShack
2 жыл бұрын
And it's REALLY grown on me the last couple of weeks! :) :)
@pkaulf
2 жыл бұрын
Not a fan of the huge arrows on shift and enter, but overall a super tidy job
@TheRetroShack
2 жыл бұрын
Thanks - appreciate that :)
@AndrewBlakeOxford
2 жыл бұрын
how are you sealing the keys - the decals could wear away with use?
@TheRetroShack
2 жыл бұрын
Oops - forgot to mention that - it was all sealed with a clear spray lacquer - I'll mention that in the next episode :)
@darrengoodridge1575
2 жыл бұрын
Love how you did the keys, I would have clear coated the keys after. The colour of the Amiga you choose is fun, I don't know about lemon amiga, more like lemon meringue Amiga!
@TheRetroShack
2 жыл бұрын
I did clear coat them :) Just forgot to mention it, sorry :)
@darrengoodridge1575
2 жыл бұрын
@@TheRetroShack fab! They look fantastic, your time and effort was well spent!
@daishi5571
2 жыл бұрын
SMH.....Most people are trying to stop case yellowing, you leaned right into it. 🙂
@espressomatic
2 жыл бұрын
That's definitely animal hair on the keyboard. Before painting, it's best to try retrobrighting with warm (50 C) peroxide solution under bright light. If that doesn't work out and you get streaking or the letters get wrecked, then you can always paint as a last resort.
@MisterMsk
2 жыл бұрын
I really like what you did with the keys. Probably clear coated after putting on the stickers to prevent them from falling off. But, very impressed on how you did the keys.
@TheRetroShack
2 жыл бұрын
Yep - did clear coat them but forgot to mention it :)
@tahustvedt
2 жыл бұрын
@@TheRetroShack I was going to ask if you clear coated them but now I don't have to. :) Great result.
@TheRetroShack
2 жыл бұрын
@@tahustvedt Thanks very much :)
@TheSulross
2 жыл бұрын
if it was actually used day in and day out like an IBM PC in an office back in the day, it wouldn't last - but a retro computer will get occasionally hunt-and-pecked on and mostly looked at, so emphasizing looks vs longevity and durability is what matters more
@chainq68k
2 жыл бұрын
I long for the days when a lemon Amiga only meant a website... :) Jokes aside, any refurbished Amiga is welcome, and personal taste is not something to be argued about! Good work.
@TheRetroShack
2 жыл бұрын
Thanks!
@bitdigital8052
2 жыл бұрын
It might look like a 🍋, but surely isn’t one. Great job on the keys and resto! I need a cool key rack like that too.
@TheRetroShack
2 жыл бұрын
Thanks! I got the key rack from thingiverse :)
@dalestyx
2 жыл бұрын
Loved the video mate, the yellow and white paint looks ace.
@TheRetroShack
2 жыл бұрын
Thanks - appreciate that :) :)
@steve87uk
2 жыл бұрын
That keyboard refurb looked painful! Patience of a saint.
@TheRetroShack
2 жыл бұрын
Well, the air was definitely blue on occasions! But it turned out really well so can't complain :)
@steve87uk
2 жыл бұрын
@@TheRetroShack So a slightly sweary saint..
@a120068020
2 жыл бұрын
I wouldn't have the patience for that, I just buy the best keyboard I can find on eBay/Amibay when doing a restoration but they are sometimes in excess of £200 for a decent white one now so I am not surprised you having to go to the extremes you did. I almost always never throw any parts away - even Yellowed keyboards people will buy presumably because they are happy to live with yellowed keys (hardcore demoscene/music people I bet), or they are up for some retrobrighting. I have probably recapped/restored 15-20 Amiga 600 and 1200 now. I keep promising myself "this is my last one". Great to see others doing restorations for different ideas and perspective. Thanks for this great content.
@doctor49152
2 жыл бұрын
in the future look into using vinyl dye instead of spray paint. It softens the plastic surface a bit and seeps into the plastic instead of just coating it. If you ever scratch it you'll find the color can go quite deep. Only thing is to be careful to not leave finger prints in the surface until it dries. Produces a MUCH nice finish. I did it years ago on a case and keyboard. It went 'around' the lettering on the keyboard which amazed me since I didn't have to redo the key lettering like you did.
@TheRetroShack
2 жыл бұрын
Thanks I’ll look into that :)
@raycreveling1583
2 жыл бұрын
@@TheRetroShack I have seen people in the home knitting machine community use idye poly on the tools & cover over the machines. Most were made in japan in the 80's. I'm guessing the plastics are similar. The downside is the poly dye's I'm familiar with require immersion in hot liquid.
@TheRetroShack
2 жыл бұрын
@@raycreveling1583 Thanks - I'll do a little research :)
@espressomatic
2 жыл бұрын
Have you ever done this with white? I've never heard of anyone dying anything lighter, not even hair. Typically to dye something in alight shade, you have to strip back the original color first. Next is the plastics type. Keys on this machine are probably ABS and I haven't heard of ABS being very susceptible to dye.
@raycreveling1583
2 жыл бұрын
@@espressomatic The samples I saw in the knitting machine group were done on white/cream plastic.. The machine cover & tools they were dyeing were made in the early-mid 80's. It was on a FB group not very searchable to find the post.
@helldog3105
2 жыл бұрын
The machine looks good. One thing I always did with my hard drives is change the disk.info file to match the file on the DH0: drive so the icons for my partitions all look like hard disks and not floppy disks. But that's just me. I would not have thought a yellow A1200 would look good, but I am pleasantly pleased to be wrong. Keep up the cool work.
@TheRetroShack
2 жыл бұрын
That's a great idea!
@Loenne555
2 жыл бұрын
Well, just thinking that painting the case yellow is a bitt of an odd choice for a machine that usually turns yellow completely by itself, and really doesn't look good nicotine colored, so people usually try to get rid of the yellowing... Also in terms of modding and popping colors, yellow is a bad contrast to the white keys now. (Which you better should've clear coated to protect the letters btw)...
@TheRetroShack
2 жыл бұрын
It does look nicer in the flesh, I promise! However I wasn't at all sure at the time! I did clear coat the whole keyboard just forgot to mention it in the video :(
@bamdadkhan
2 жыл бұрын
gives a whole new meaning to 'chickenhead' xdddd
@nikolaoskonidis2768
2 жыл бұрын
Excuse my saying, but spraying the keys was not a good idea. Whoever decides to use this keyboard on a regular basis, they will soon see the paint peel off... Retrobrighting was the right way to go. Unless, you intend to keep your Amiga on a shelf.
@TheRetroShack
2 жыл бұрын
Five coats of clear coat should be enough to prevent that - at least so far it has been - we’ll see how it goes and I’ll do a little update as time goes on.
@tominmo8865
8 ай бұрын
Absolutely stunning result! Those white keys would look good with any case color--sorry, colour.
@kaitlyn__L
2 жыл бұрын
Nice job matching the font on the decals! I wonder if they still make them for sale in Letraset form? 🤔 Wouldn’t have provided for the modifier key symbols though. One of those aftermarket RGB LED PCBs for the status lights might be interesting. Could colour coordinate adjacent hues with the case, eg yellow amber red. Though of course you can pick any palette, even have different lights the same colour.
@TheRetroShack
2 жыл бұрын
Interesting! I'll have to take a look at that :)
@johnpetruna8888
2 жыл бұрын
My first impression on seeing that yellow is that you must have lost a bet. But it's the color you want, all the work is first rate, and you're very happy with it. Good on you.
@TheRetroShack
2 жыл бұрын
Thanks! I can't honestly say it turned out the way I saw it in my head - but it's grown on me :)
@domramsey
2 жыл бұрын
Obviously, do what you want with your stuff, but... that poor Amiga!
@TheRetroShack
2 жыл бұрын
Don’t feel too bad - it’s in a darn site better condition than it was and it gets lots of love :) :)
@domramsey
2 жыл бұрын
@@TheRetroShack I'm worried the paint and decals on those keys is going to chip off very quickly with regular use, then you're going to end up with something that can't be fixed.
@projectfanboy
2 жыл бұрын
If your using water slide decals in the future have a look into getting some Micro Sol, it helps the decals settle into none flat surfaces better.
@TheRetroShack
2 жыл бұрын
Thanks for the tip :)
@ClassicRetroByte
2 жыл бұрын
You have done a grand job although the keys where yellowing. Now the case is yellow.
@TheRetroShack
2 жыл бұрын
The irony wasn't lost on me when I'd finished :) :) But honestly didn't consider that while I was doing it :)
@TheClassicsCoder
2 жыл бұрын
I wished I would just have half the patience of what you had doing the keys! Awesome! 👍
@TheRetroShack
2 жыл бұрын
I'm not going to lie - it was reallllly monotonous work! :) But glad you liked it :)
@MatthewJohnCrittenden
2 жыл бұрын
Looks great! You have more patience than me. My result would have been shocking. As someone else said I may have made the Shift and Enter keys a bit less bold but you've now got a useful and unique bit of kit.
@YogSothoth1969
2 жыл бұрын
Very cool, yellow suits it very well!!! I like it! Michael...
@TheRetroShack
2 жыл бұрын
Thanks :)
@kevingauthier7973
2 жыл бұрын
Liked the first color better but it is yours and I enjoyed the video very much.
@TheRetroShack
2 жыл бұрын
Thanks - I did have an 'Oh No!' moment with the Yellow - but I've gotten used to it now and I'm rather taken with it :)
@kevingauthier7973
2 жыл бұрын
@@TheRetroShack Same as with my wife
@xsm5525
2 жыл бұрын
did you have to spray a primer on it first or did you just spray the yellow on first? thinking of doing it myself and I've heard it's best to spray on a primer first.
@oisnowy5368
2 жыл бұрын
Can't say I'm a fan of the yellow, just not my color. The keys came out pretty nice; different colors would have been awesome but probably a bit too much work. I'd guess different colors would look less monotone. All in all a great job still. (I would have rather seen red functions keys, and a beige case. Guess my fav retro micro.)
@TheRetroShack
2 жыл бұрын
(My favourite too :) :) If you haven’t already you should check out my BBC Micro videos
@thezood
2 жыл бұрын
If Commodore had done Amigas this pretty they would surely have stayed in business for another year. Or at least six months.
@TheRetroShack
2 жыл бұрын
Thanks - it is a pretty thing isn’t it? :) :)
@georged-vy7mn
2 жыл бұрын
That yellow looks absolutely fantastic I love it :)
@TheRetroShack
2 жыл бұрын
Thanks :)
@imalebowski
2 жыл бұрын
Talk about case yellowing! Good job on the keys!
@TheRetroShack
2 жыл бұрын
Thanks very much!
@d2factotum
2 жыл бұрын
I'm OK with the shade of yellow, but think I would have preferred a more matte finish--didn't like the way the light reflected off it.
@TheRetroShack
2 жыл бұрын
It's a lot less shiny outside of the studio lights - I have big white LED lights all around the workbenches. It's controversial for sure :) :)
@richardblack5710
2 жыл бұрын
Good Job Painting but you chose a bad color. The dark gray was a lot nicer.
@TheRetroShack
2 жыл бұрын
I was kind of 'Oh my god, what have I done?' when I first finished, but it's grown on me a lot since :)
@Lucretia9000
2 жыл бұрын
I put my A1200 + A1230 MkIV + SCSI cards into a PC case in 1996? Cutting out the port holes in the back, before they had removable plates, with a drill, hacksaw and a file. Took ages, the PC keyboard interface wasn't great, but it stopped the thing overheating.
@TheRetroShack
2 жыл бұрын
I bet that was a hell of an undertaking too!
@Lucretia9000
2 жыл бұрын
@@TheRetroShack Full sized PC case, yeah, that metal is harder than you think. If I was to do it now, I'd look into a custom plate and then just use extension cables. Then see if anyone had produced a Zorro -> PCI board for slots.
@fubaralakbar6800
2 жыл бұрын
Retro-brighting with spray paint--wow, I wasn't expecting that!
@MadsonOnTheWeb
2 жыл бұрын
I put a like on it since I saw it painted in yellow
@TheRetroShack
2 жыл бұрын
Yay! Another Lemon Lover! :)
@rodoherty1
2 жыл бұрын
Fantastic job!
@TheRetroShack
2 жыл бұрын
Thanks very much :)
@desiv1170
2 жыл бұрын
Don't let anyone deter you... If that is your style choice, then you do you... It's all about how YOU feel about it and... DEAR GOD NO!!! WHAT DID YOU DO?!?!?!? OH THE HUMANITY!!! WON'T SOMEBODY THINK OF THE CHILDREN!!!! WHAT A WORLD; WHAT A WORLD!!! ... er.. Sorry... um... great vid...
@TheRetroShack
2 жыл бұрын
It IS an acquired taste this colour isn’t it! :)
@MrLurchsThings
2 жыл бұрын
Did you drop a coat of clear over the decals?
@TheRetroShack
2 жыл бұрын
I did indeed Mr Lurch :) :)
@MrLurchsThings
2 жыл бұрын
@@TheRetroShack good work 👍the decals wouldn’t last long otherwise. Overall I reckon it turned out really well. It certainly will stand out from the crowd 😁
@jaypaul6809
2 жыл бұрын
Where did you get the key holder from? It’s such a challenge to evenly retro right the keys without them floating
@TheRetroShack
2 жыл бұрын
There’s a link to it in the video description :)
@peddersoldchap
Жыл бұрын
That's a properly yellowed 1200! I'll get my coat...
@jparky1972
2 жыл бұрын
Not a direction I'd have gone with this machine. But like with anything modified, you can't please all the people... I do wonder of the longevity of the keys though. A mat clear coat is probably needed if you intend on actual using this machine as anything other than an occasional use machine. Well done otherwise though.
@TheRetroShack
2 жыл бұрын
Yep - I did add a clear coat to the keys, just forgot to mention it in the video :) And yes, I thought this might be divisive but you have to try new things :) :)
@doctordapp
2 жыл бұрын
Definitely worth the wait! Looks stunning!
@TheRetroShack
2 жыл бұрын
Thanks!
@jonvincentmusic
2 жыл бұрын
way faster, easier and more original to just have retrobited the keys
@TheRetroShack
2 жыл бұрын
I agree. But I did this just to see if I could :)
@tech34756
2 жыл бұрын
If you think this is too far, you should see my Amiga 1200 setup, I've got mine in a Checkmate A1500 Plus with an ACA1233n, gotek, a slot loading DVD drive and I'm going to burn a custom Kickstart 3.2 with IDEFix 97 to allow for booting CDs from ROM.
@TheRetroShack
2 жыл бұрын
Well, this is only part 2.... :) :) Sounds like you have an impressive setup there! :)
@tech34756
2 жыл бұрын
@@TheRetroShack Kind of, main downside is CD32 CDDA audio is a pain since I need to find a specific drive and manually mix it, so I'm leaving it for now and considering my options. I also want to improve it in the future with better video output (replace the GBS 8220) and maybe a better accellerator, possibly a PiStorm which may come out next year, although CPU emulation feels a bit dirty for some reason.
@KoopaMedia64
Жыл бұрын
That keyboard "restore" was significantly more effort than a simple retrobrite would have been. No forgiveness will be issued.
@FindecanorNotGmail
2 жыл бұрын
"If you don't bleed, it's not a real project", the saying goes. :) BTW. On my A1200, I retro0brighted the keys after having washed them with denture cleaning tabs in a washing bag (for ladies' garments with underwire). Washed the plastic parts with water and dishwashing fluid. That was _much_ less work ...
@TheRetroShack
2 жыл бұрын
Now you tell me! :) :) I'll have to give that a go next time :)
@neilo3476
2 жыл бұрын
Great work! Whilst yellow wouldn't be my preferred choice it does look lovely. One of my projects is to towerize (?) an A1200 as was done back in the day. But hopefully with a more modern twist
@FatNorthernBigot
2 жыл бұрын
That's not attic dust on those keys, it's the cremated remains of Commodore International Ltd. Easy mistake to make.
@TheRetroShack
2 жыл бұрын
LOL! - Could be!
@FatNorthernBigot
2 жыл бұрын
@@TheRetroShack Either way, that's a funky-looking Amiga. The hard work paid off.
@TheRetroShack
2 жыл бұрын
@@FatNorthernBigot Thanks very much :)
@vertigoz
Жыл бұрын
Nice machine full of personality!
@Gunstarrhero1
2 жыл бұрын
the keys are nice, id like to see you match the original shift and enter keys like the are on the amiga, not so bold, and the shift keys are hollow.... curious.. why didnt you peroxide wash the keys, see where they sit, then paint them if you didnt like the colour? oh yeah, did you clear coat the new paint job? you might want to do that if you just sprayed because you dont want the paint to chip off or rub off.....
@TheMadricks
11 ай бұрын
This project is cool👍. I've got a question : Is it possible to 3D-print keycaps of the Amiga?
@raveneye77
2 жыл бұрын
Why not use hydrogen peroxide and UV light to remove yellowing from the keyboard? Check out the channel of Odd Tinkering. He does tons of restorations on old handhelds and game consoles and constantly uses this method to turn yellow plastic back to their former grey look.
@TheRetroShack
2 жыл бұрын
I explain this in the video :) I also do retrobriting - Check out some of my other videos :)
@slowlymakingsmoke
2 жыл бұрын
If there is any computer that is made to reflect its owner, it is the Amiga. You have done a Sterling job. I think you have found the method dejour for keys.
@TheRetroShack
2 жыл бұрын
Thanks very much :) :)
@jamesdstallard8743
Жыл бұрын
Question, why aren't you using peroxide and UV to remove plastic yellowing?
@KorAllRBare
2 жыл бұрын
**TIP** If there ever is a need to clean intricate components with many nooks and crannies "such as keyboards" harbouring years of stubborn Grime, Try and source a horse haired paint brush dipped into IPA, rather than a wet cloth, for really stubborn grime you could use a hard grade tooth brush, once the grime is removed wash and dry the Horse hair Paint Brush and place a fluffy cloth over what needs drying and using the paint brush, Brush the cloth that's covering the parts which need drying.. APU I dropped a 👉👍👈
@kins749
Жыл бұрын
Really impressed with those keys, not sure I'd have the patience. The banana yellow case though, erm...
@005AGIMA
2 жыл бұрын
So...the Amiga was yellowed and now....it's more yellow :D
@TheRetroShack
2 жыл бұрын
That's about the long and short of it :) :)
@paulburke8371
2 жыл бұрын
The A1200 roms were update in 2000 as it was running Workbench 3.9 when I stopped using it the A1200
@properjob2311
2 жыл бұрын
Amiga 1200 seems to be only retro machine that its acceptable to mod and repaint etc
@TheRetroShack
2 жыл бұрын
Can you imagine if I did this to a ZX Spectrum 128k toastrack? :) :)
@MatthewHolevinski
2 жыл бұрын
I miss that keyboard so fricken much....
@DAVIDGREGORYKERR
2 жыл бұрын
If you are going to do something right then what about a SCSI interface card to allow the install of a DVD R/W drive as AMIGA OS is usually supplied on a DVD.
@TheRetroShack
2 жыл бұрын
Now that's not a bad idea at all...
@TheSudsy
2 жыл бұрын
good luck finding one. Squirrels are hens teeth and a board add on for accelerators just as rare / expensive. But worth it if you can
@slowlymakingsmoke
2 жыл бұрын
Aaah DVD’s are soooo naughties….🤣
@tech34756
2 жыл бұрын
You can add DVD drives via IDE, although CD32 CDDA can be a pain as you have to rely on the DVD drive's audio output and you need a disk or custom KS ROM to make it bootable.
@gklinger
2 жыл бұрын
I'd say that was a rousing success. Well done!
@TheRetroShack
2 жыл бұрын
Thanks very much :)
@tahustvedt
2 жыл бұрын
I hope to find a cheap and scruffy 1200 that needs love. I have a repaired 500+ that was badly corroded and an A2000.
@TheRetroShack
2 жыл бұрын
Good luck with the hunt! :)
@Bishaco
8 ай бұрын
Never forget
@DAVIDGREGORYKERR
2 жыл бұрын
Some people like to put electronics through the dishwasher and then dry them off in the hotpress.
@FindecanorNotGmail
2 жыл бұрын
"What could possibly go wrong?" ;)
@TheRetroShack
2 жыл бұрын
I've seen it done - I've never done it :) :)
@koztech
2 жыл бұрын
OMG! Were the previous owners using the keyboard as a loom? Were they trying to weave a sweater? 🤣
@TheRetroShack
2 жыл бұрын
:) :)
@GraphicalRanger
2 жыл бұрын
Well that was bananas... Nice work though!
@TheRetroShack
2 жыл бұрын
Bananas. :)
@cbmeeks
2 жыл бұрын
I think I would have put a clear coat on the keys. Looks good, however!
@TheRetroShack
2 жыл бұрын
I did - I just forgot to mention it :)
@iCQ_www.SPCL.tk_
2 жыл бұрын
Thanks for these nice shares sir!!! 💛🙏
@MegaManNeo
2 жыл бұрын
The process of reapplying the letters to those keycaps looks painfully annoying but the total payoff is beautiful in return :D
@TheRetroShack
2 жыл бұрын
Absolutely - it was a total nightmare but now it's done I can't stop looking at it :) :)
@ConradVassallo
Жыл бұрын
Good job. Just those shift keys look like pine trees 🌲
@Phil-Sands
10 ай бұрын
I bought a new case and new keycaps for the A1200 in May 2023.
@bufordmaddogtannen
2 жыл бұрын
Surely you have lots of patience. 😁 Any chances you filmed how you repaired that melted crater on the case?
@andyjdhurley
2 жыл бұрын
He didn't, that was a different case, he did explain that. I guess we will see what he does with the meled one soon.
@MrMurphyprecht
2 жыл бұрын
Why didn't you just retrobright it?
@laurencemaddock1118
2 жыл бұрын
Please could you give some details of the spray paint used 😊
@TheRetroShack
2 жыл бұрын
All materials now detailed in the video description :)
@laurencemaddock1118
2 жыл бұрын
@@TheRetroShackThank you very much
@MrBlackmaxDK
2 жыл бұрын
would love to flash my 1200 here :D yellow is my favorite color so you got my vote
@TheRetroShack
2 жыл бұрын
Send me some pictures through - Love to see other people's machines :)
@MrBlackmaxDK
2 жыл бұрын
@@TheRetroShack sure can where can I find a mail to you ?
@Colin_Ames
2 жыл бұрын
Yes, you are forgiven! Colour-matching the jumper was definitely attention to detail. The keys look excellent, but I wonder how the lettering will hold up if you actually use the machine regularly.
@TheRetroShack
2 жыл бұрын
I didn’t mention it in the video but I did give the whole thing a coat of clear coat to protect the decals. Let’s see how it goes :)
@gregskuza7166
2 жыл бұрын
Be careful because some Apollo accelerators will kill the factory CPU on the motherboard
@VladoT
2 жыл бұрын
This reminds me of a car that I bought... it was painted 3 times with different colors 😀
@TheRetroShack
2 жыл бұрын
But this doesn’t go vroom vroom :)
@frankowalker4662
2 жыл бұрын
That's a very bold colour to go with. I like it. Google lemon meringue pie. LOL. Edit: Like you said, No-one realy cares if an Amiga is upgraded, updated or messed about with. It seems it was what it was meant for. I could be taylored for the individual.
@MrAoldham
2 жыл бұрын
Dear me...
@TheRetroShack
2 жыл бұрын
Not a fan then? :) :)
@MrAoldham
2 жыл бұрын
It's entirely up to every person as to what they do with machines, but I honestly think it's sacrilege!
@michaelhill6453
2 жыл бұрын
It was looking so good. And then it went gloss yellow. Yellow? Ah well, it's your machine. :-)
@fourbypete
2 жыл бұрын
My only complaint with my 1200 is the keyboard. I'd love something more modern like my wireless logitech keyboard.
@bitoxic
2 жыл бұрын
Where did you get the key grid tray?
@TheRetroShack
2 жыл бұрын
There’s a kink in the description :)
@InfiniteLoop
2 жыл бұрын
I can hear 8 bit guy, but you’re not supposed to yellow a machine,,,
@TheRetroShack
2 жыл бұрын
Lol - yep!
@massmike11
2 жыл бұрын
Should have clear coated those decals to protect them from wear
@TheRetroShack
2 жыл бұрын
I did :) Just didn’t mention it, sorry :(
@daspec
2 жыл бұрын
No reason to waste so much time to paint the keys. They would have been super clean if soaked for 1 hour in warm water + dish soap + Tide and after some toothbrush treatment ready for retrobrite which COULD restore the original colour regardless of yellowing. But then again, you painted the case yellow so it now looks like lemonpie :P
@rogerchtarponne4968
2 жыл бұрын
No forgivness !! You deserve to use an Atari ST for ever !! 😉
@jinxterx
2 жыл бұрын
Excellent job on the keyboard but honestly, that case colour is bloody awful :D
@TheRetroShack
2 жыл бұрын
Honestly, there was an ‘Oh god…’ moment when I started laying down the colour on top of the grey - but it’s grown on me and makes for a good debate :)
@TheLevitatingChin
Жыл бұрын
I recommend nitromors paint stripper
@RobA500
2 жыл бұрын
You've got a dirty yellowing Amiga 1200, what to do? Paint it Yellow of course, I like it👍. Far better than the Grey, I think that would have been too Atari ST'ish.
@TheRetroShack
2 жыл бұрын
Now that's funny - hadn't thought of that! I'd have had more of a backlash from the Grey for sure :) :)
Пікірлер: 248