Yeah, that's a great video. Moreover, Please share the part 1 and 2
@shanmukhasrinivasbg716
2 жыл бұрын
Thank you for the video. It's so helpful. But can you please clarify how the desired year is selected? Is it just the year in the output file name?
@IvyGondwe
5 ай бұрын
Thank you very mush for sharing knowledge On data inputs for the prediction, is it just the historical land cover map for the older years or you also considered other factors?
@davidleonardoberserker6914
2 жыл бұрын
Muchas gracias 😁👌🏻
@evanschanda8040
Ай бұрын
Thank you for sharing , which version of qgis is compatible with molusce plugin
@RuvimboNyamugunduru
5 ай бұрын
I want the part 2 of this series
@tbeegraphics
Жыл бұрын
Thank you. How did you specify the number of years for the MOLUSCE to predict
@نذيرصلاحالدينأيوب
26 күн бұрын
when i add slope and elevation maps and click on check geometry, a massage appears stating that the geometries are not equal, how can i fix this problem, please?
@akbarrizaldi6855
Жыл бұрын
Why the number of iterations for 2020 is bigger than 2030? I found the other videos told that if the range of prediction is farther then the number of iterations should be increasing. please explain thanks
@dhruvsaxenadstar
Жыл бұрын
Till my experience, number of iterations don't correlate with simulation years
@badriefendi152
2 жыл бұрын
Hello sir, thank you for the great video! I want asking question how to increase kappa accuracy? Im stuck in 66%
@asyamyanuar701
2 жыл бұрын
Sir, I try your step but the land use especially forest and waterbody always change in the future. In my country law, the forest and waterbody disallowed for changing especially for development. So what should i add in this step to avoid the change of those land uses? Thanks
@akkaraponchaiyana6520
2 жыл бұрын
Thank you for your comment, I am not sure that MOLUSCE plugin can restrict area or not. But I am really sure that Dyna clue model can restrict as you need. For example, we would like to restrict national park area particularly by law. We can highlight those areas that will not change. Best of luck!!!
@avijitbag6058
Жыл бұрын
How many hyden layer i consider for better and why. Please explain
@sheelaprasad6949
2 жыл бұрын
Hey, Thank you for the great video. But I am facing a few problems while following the steps, I am able to follow till "update table" steps but while creating the change map I am getting errors like "List of categories of the first raster doesn't contain categories of the second raster" while my classes are exactly the same for all years which I have made in ArcGIS.
@betsy-ui9uw
5 ай бұрын
hello, do you offer classes to make predictive maps? i have some doubts about the generation of information of the variables.
@knowledgeis_power
5 ай бұрын
My simulation results of 2030,60 n 90 all are showing same
@laniealejo298
2 жыл бұрын
What year should your DEM be?
@Valivetirambabu
2 жыл бұрын
Thanks brother for sharing I am from AIT and Need your help on google earth engine
@akkaraponchaiyana6520
2 жыл бұрын
Yes, I do
@babajideemmanuel9404
2 жыл бұрын
Thank you for this video but after preparing my data on arcgis and I try to use the molusce plugin…I’m told the geometry of the initial year or final year doesn’t match the factor used (they are all in GEOTIFF format)
@frankbrown5429
Жыл бұрын
Maybe the cells number between those two rasters are diffrence, I had the same problem
@ekabudikhoirulumam3913
Жыл бұрын
Convert raster to polygon. Convert again polygon to raster. Dont forget to setting cell size, output coordinate and mask
@mduzzalmia6069
Жыл бұрын
Akkarapon Chaiyana! I have faced a python problem! How can I solve it?
@norane96
2 жыл бұрын
Merciii. But how to convert class to value . i have ndvi with class and i wont ndvi with value -1 et 1
@NadilaFebri
Жыл бұрын
I follow the same way, but when i click “update tables” the app always said “python error” and the result didn’t appear. What should i do for that??😢
@mindjerichard4883
Жыл бұрын
Change the vesrsion of your QGIS software. I recommend Qgis 2.18.15
@luthfiinsan4823
Жыл бұрын
when i run the cellular automata simulation, the qgis always crashes.. can someone help me? i need advices to solve that issues
@houssamh8180
2 жыл бұрын
hello Sir a-how can I select the epoch or epochs to simulate ? for example Molusce determine simulate map of 2020,2030,2040,2050 b- which time molusce simulate for me ? Best regards
@dhruvsaxenadstar
Жыл бұрын
Just mention year as filename in simulated map filename
@Naturistic0786
Жыл бұрын
Now this plugin is not available what should I do.
@mindjerichard4883
Жыл бұрын
Use the older version of QGIS such as 2.18.15
@durgasrilakshmihari6206
2 жыл бұрын
Only DEM file is considered as a variable ? but DEM file usually can't match with base year LULC .. for example if base year LULC is 1990 if we download ASTER DEM is it okay.. please clarify the doubt...
@akkaraponchaiyana6520
2 жыл бұрын
You are right. My video produced an example that we can make a future map. Normally, the factors to be used are population, road network, distance from the road, distance from the city, there are socioeconomic factors. In addition, physical factors are DEM, slop, stream network, and distance from the stream. So, you added many variables if you understand the procedure. Thank you so much.
@durgasrilakshmihari6206
2 жыл бұрын
@@akkaraponchaiyana6520 can you please clarify that the variables must match with the base year we considered for suppose if I consider year 1990 as base year I have to get all variable layers of 1990 year like road etc ? how to get old shape file data to exactly match with yr 1990 ..
@akkaraponchaiyana6520
2 жыл бұрын
@@durgasrilakshmihari6206 I am not an expert of this application. But you can read papers to make sure which variables are important. with your purpose. It has many papers that use this plugin. Best of luck
@manuela.torres6546
4 ай бұрын
Is molusce plug.ins still applicable?
@nextgis_channel
Ай бұрын
Hello! Yes, MOLUSCE 4 has been released, now with support for the latest versions of QGIS
Пікірлер: 38