the strut towers, get a 3d scanner, scan the driver side one, make a cad model, mirror it, and have someone like dsport cnc you biller ones. Almost guarantee its cheaper than oem.
@HowYouKFC
3 ай бұрын
And billet would be stronger than the cast original
@DontReadMyProfilePicture566
3 ай бұрын
Don't read my name
@xzanm9216
3 ай бұрын
he needs to see this comment
@MDog_FPV
3 ай бұрын
100% milled out of a solid block would be 1-2k tops and stronger than cast
@krasnaindiancuisine8338
3 ай бұрын
Strad needs to see the comment talking about this ^
@LambosOnly
3 ай бұрын
Randomly seeing Dave Kindig driving around was awesome.
@garyflores6905
3 ай бұрын
It was Bitchin !!!
@LambosOnly
3 ай бұрын
@@garyflores6905 I see what you did there!
@jkfonyi
3 ай бұрын
The dually on air might have been kev dogg from bitching rides too 😂
@ICP1SBJ
3 ай бұрын
@@jkfonyi wow! You're right they've shown Kev Dog's dually a few times.
@justinsantos
2 ай бұрын
Just because you wired the money doesn’t mean you had to take possession, big learning lesson
@ohedd
2 ай бұрын
Seriously, just CNC your own aluminum strut tower. Scan the other side and go to a third party. The material costs of CNC milling for relatively small parts like this is $100/kg, roughly. For a 5hr job like this I'd be surprised if they'd charge you more than $1-2K.
@MorphMixologyReptiles
3 ай бұрын
I really like Strad, but I have a hard time having empathy for this situation as he stands in front of one of two new fifty-some thousand dollar cars.
@Greater726
3 ай бұрын
Put the damaged car shell on the wall. Put the engine in the donor gallardo. Boom a new v12 Italian beast plus a wall car
@chisoxfan773
3 ай бұрын
Youre telling me that NO ONE in the states or elsewhere can make you a strut tower ? SOMEONE has to have a scanned file of one ...
@robertwolfe409
2 ай бұрын
Call Richard Rawlings at GMG & ask what was done to the black F40 & go from there..
@levistevenage8336
3 ай бұрын
Put the engine in the Lamborghini that needs a engine
@ChaseDen
3 ай бұрын
At this point he probably really regrets selling the clean title 812…
@mist9545
3 ай бұрын
Most definetly..
@semaJnorbeL23
3 ай бұрын
Actually, not at all. He will extract a ton of content for his channel and make it more engaging so that viewers will want to stay on.
@JBANDZZZZZZZZ
3 ай бұрын
@@semaJnorbeL23 which will probably generate more revenue than the Ferrari is worth anyways
@Yr_Lx
3 ай бұрын
maybe not so much, he can make a lot of content of the damaged 812, more than the clean title and probably at the end it would make him more profit and he would be able to know that he was able to repair a very badly crash damaged car
@doubleDMD
3 ай бұрын
@@semaJnorbeL23 My thoughts exactly, this saga and issue has easily created a followable series for the future. His headache is our viewership. (Not complaining, I love his channel.) But definitely not the worst thing for him given his line of work.
@drewyoung2157
3 ай бұрын
Strad, make sure to look at the salvage yards in Dubai. I’ve already seen salvage 812s popping up after the recent floods. Chances are if you could find a strut tower there, it wouldn’t be destroyed. Because it’s an aluminum part, it shouldn’t rust, but you could still double check corrosion.
@Uplifted100
3 ай бұрын
Correct the floods took so many supercars off the roads😭
@commonsenseisdeadin2024
3 ай бұрын
"it shouldn't rust" Well obviously it's not going to rust as it is aluminum like you said...... It will corrode however, and you know what salt water does to pourus cast aluminum? Rust is childs play, rust can be repaired easily, corroded cast aluminum on the other hand! 😢
@Uplifted100
3 ай бұрын
@@commonsenseisdeadin2024 yea the water in dubai contains some salt which may be a massive issue 😔
@drewyoung2157
3 ай бұрын
@@commonsenseisdeadin2024 I said “shouldn’t” in the case that it isn’t pure aluminum. Even a small amount of alloying metal could lead to rust. But yes-you’re absolutely right. My point is that it’s worth looking into. It’s certainly a better idea than, say, trying to repair the existing strut lol.
@commonsenseisdeadin2024
2 ай бұрын
@@Uplifted100 oh it’s going to be a nightmare….. just look at Tavarish and the P1! It doesn’t take much! Houston and the Bug is a good example too, except that wasn’t totally submerged.
@milania2588
3 ай бұрын
Strad is embracing his baldness with the thumbnails
@TheStradman
3 ай бұрын
240k likes on this video and I'll really embrace it haha
@DatBoiGloomy
3 ай бұрын
@@TheStradman you sir, are playing with fire lol
@SLEEPY_H0LL0W
3 ай бұрын
@@TheStradmanyou have a massive fan base consider it done
@justin4323
3 ай бұрын
@@TheStradmanBald is beautiful. Join the club brother
@SRL72156
3 ай бұрын
@@TheStradmanI cant wait!!!😁
@gungadinn
3 ай бұрын
James, I worked in aerospace for a lot of years. We used a piece of equipment that a company called Direct Dimensions Inc both sells as well as offers services to produce an exact digital copy. The digital copy can be turned into a CAD file to have a part produced from what everyone now calls "Billet" aluminum, steel or laser 3D printing. Before I'd use a cast part, I'd get a part produced from a solid block of aluminum.
@3dtunermalayalam71
3 ай бұрын
Now that is a good idea. If he could find a strut to scan, then he could make it his own.
@ourfutureisdark
3 ай бұрын
How do we make sure he sees this comment?
@throoper59
3 ай бұрын
Was literally thinking for 34,500 you could probably find some to make a knock off
@aminalone
3 ай бұрын
@ourfutureisda like it over and over lol 😅
@bokuden79
3 ай бұрын
As litigious as Ferrari is, I'd be real careful with that.
@nextechandroid
2 ай бұрын
Hey Strad, I’m an automotive engineer, that 30K pressure die cast aluminum part cannot cost more than 250 bucks (I used to work for a company that made those for Mercedes Benz and other brands). Don’t waste tens of thousands of dollars. Call a supplier in the US that specialized in engineered billet machined parts (DJ Precision Machine, Speed Factory Racing, or anyone that has their own billet products) and ask them to 3D scan, design an alternative strut tower solid component, and machine the part to dimension. No way that will be more than 30K and it will be more structurally rigid as well as better looking.
@The_Darkhearts-official7751.
Ай бұрын
Yo this man a w
@steveg6060
3 ай бұрын
How disrespectful would it be to put the Ferrari drivetrain in the Lamborghini Gallardo?
@ironangij2006_
3 ай бұрын
He would be banned by both Ferrari and Lamborghini 😂😂
@philtrumble
3 ай бұрын
Lm002😂
@vibertparis1837
3 ай бұрын
😂 facts@@ironangij2006_
@richieep
3 ай бұрын
madman.
@pbulgado23
3 ай бұрын
@@philtrumble YES!! Sounds like a great idea
@AJStreator
3 ай бұрын
I like that he’s uploading regularly on both channels now 🔥
@aryankumar6075
3 ай бұрын
What's the other channel?
@VJ29110
3 ай бұрын
@@aryankumar6075STRAD
@Sheppydope
3 ай бұрын
@@aryankumar6075 STRAD
@pradadaze
3 ай бұрын
@@aryankumar6075STRAD
@CallanTaylor
3 ай бұрын
@@aryankumar6075it’s called STRAD
@FreezeGamings
3 ай бұрын
Go ask travarish he is now the warranty and certified in damage exotic car 😂
@eric_in_florida
3 ай бұрын
Bro you gotta cut your losses on that Ferrari. 34k for a part is like a middle finger from them to you.
@SniderM-zn1cf
3 ай бұрын
Thats definitely way to much money just for 1 part
@c.m.7037
3 ай бұрын
I will never own a Ferrari, they treat their customers like total crap.
@DontReadMyProfilePicture566
3 ай бұрын
Don't read my name
@spike-lx5qv
3 ай бұрын
@@c.m.7037 Same, thats why I got a camry
@MrMlbfan6
3 ай бұрын
@@SniderM-zn1cfthey definitely gauging those prices . Gotta find a donor car or parts car
@CKSIN1STER
3 ай бұрын
How cool it would be if he put the 812 drive train in the black LM002.... Imagine.. just imagine
@R4FF
3 ай бұрын
yes please!
@Siryetti
3 ай бұрын
Agreed
@memertmemes2586
3 ай бұрын
I mean I think its cool, but ferrari and lamborghini wouldnt. lol. Might lose his allocations hahah.
@xurcom
3 ай бұрын
This or the donor lambo would be sick
@tvishigames6975
3 ай бұрын
Even better would be a ferrari v12 in the LM002
@oriontackett7643
3 ай бұрын
Dave being spotted is super cool. He's probably my favorite automotive based individual ever. His designs are timeless and he's an actual nice guy in real life.
@i000_
3 ай бұрын
Damn, I can't believe I've been watching this channel for 9 or 10 years. Im still not tired of it. Many channels have come and gone in my life, but this one remains along with Neeme and Brad.
@DontReadMyProfilePicture566
3 ай бұрын
Don't read my name
@manjotarora5928
3 ай бұрын
Same, 9/10 years too! Such a long time and I’ve seen every single video, never gotten bored. Strad is always a priority
@i000_
3 ай бұрын
@manjotarora5928 🤣 From a kid to a man. Time Flys when^ watching good content.
@glenn9955
3 ай бұрын
same
@Michael666CA
3 ай бұрын
Exotic Auto Recycling. They have a few of these listed (Front Frame Suspension Casting, is what the part is listed as) eBay for $2500. I don't know your exact model. And by the looks of my research the same part fit several different models which the dealer would never tell you that.
@TWICED5
3 ай бұрын
So what everyone should learn from this video just buy a lamborghini
@Michael666CA
3 ай бұрын
Maranello classic parts has one for £13,238.99 that's 16,746.00
@Michael666CA
3 ай бұрын
Let me know when I'll send you my address for a finders fee 😁
@Cheapass_mx5
3 ай бұрын
@thestradman
@Michael666CA
3 ай бұрын
RF Front Frame Suspension Casting,
@Mr7ruck3r
3 ай бұрын
If anything else doesn't work, you can always put the Ferrari on the wall and the engine with transmission as a coffee table
@alxp5892
3 ай бұрын
Shell on the wall, Drivetrain in the LM002 :)
@sebyouthere
3 ай бұрын
@@alxp5892 NOW WE TALKIN
@Binchicken_productions
3 ай бұрын
Please dooo
@kleoncars
3 ай бұрын
I love how he mentions Sophia in every single safety matter of the car
@Idrive1234
3 ай бұрын
9:16 that was a Coachbuilt Corvette C1 by Kindig garage called KINDIG CF1, and the driver was the owner of the company Dave Kindig
@zachhowell1093
3 ай бұрын
got to see one up close this year at barrett jackson, build quality was out of this world
@ICP1SBJ
3 ай бұрын
haha I thought he wasn't going to recognize Dave for a second. That was a missed opportunity to have him on the channel. I love his show!
@Berm_Blaster
3 ай бұрын
Kindig does some awesome work
@oriontackett7643
3 ай бұрын
@@ICP1SBJ can't miss that goatee he rocks lol
@DudeItsJosh
3 ай бұрын
If worst comes to worst, and you can’t register the car because of the structural damage, put the new kit on it and make it pure, no bs track car. Part out the seats and everything else that would add weight, get the money, get a rollbar and all other essentials. I do miss the 430 challenge, that car was something else.
@hungryalien
3 ай бұрын
he doesnt do track all that much. unlike tj dustin and emilia
@DudeItsJosh
3 ай бұрын
@@hungryalien that’s a good thing, it’s an untapped niche for him. Plus, the car in itself already has such an amazing backstory! If he manages to pull the repairs off himself and not through them, Ferrari will be on him with a Cease and Desist bc that’s just how they are. So if he just says screw it, imo, he’d have something hella unique.
@hungryalien
3 ай бұрын
@@DudeItsJosh sounds like fun. although he did had several "race cars" before but the only speeding he really did was the top speed solo runs with bugatti and lambo. its not really in his blood.
@DudeItsJosh
3 ай бұрын
@@hungryalien true true, i see what you mean, would be cool to see a 812 Challenge regardless hahaha
@farislatif8846
3 ай бұрын
So that 2nd channel is real and not some fan upload the content from other platform 😱🤦♂️
@Tmcsot-Official
3 ай бұрын
Try reaching out to Mat Armstrong in the UK to see if you could get that strut tower from the UK, Since over there in the UK getting frame parts isn't as big of a head ache.
@nicholasvaughan5684
3 ай бұрын
You saw a CF1 and Dave Kindig himself and almost glossed it over!! So glad you at least mentioned the man by name!!
@rickybobby7285
3 ай бұрын
Dave’s an absolute legend
@nicholasvaughan5684
3 ай бұрын
@@rickybobby7285 you know…if Strad spiked his hair and grew a bitchin’ beard…
@rickybobby7285
3 ай бұрын
@@nicholasvaughan5684 lmao
@cosmicrocks6138
3 ай бұрын
It’s so cool to see how far you came Strad. Keep doing you and it’s amazing to see the progress on the car.
@CoenVR123
3 ай бұрын
hi
@coolbeardeddragon1157
3 ай бұрын
A good idea is to "borrow the piece" for further examination and buy/use a 3d scanner to scan the item. You can then use websites like PCBway or something else to 3d print or make from titanium.
@Zuqxii
3 ай бұрын
yeah highly doubt ferrari would allow that but that would be much cheaper
@The_Guy_That_Bikes
3 ай бұрын
@@Zuqxiihe could just find a non crash damaged 812 and scan that one
@coolbeardeddragon1157
3 ай бұрын
@@The_Guy_That_Bikes yeah thats another good option hope he sees this before 70k goes down the drain
@Jackarealist
3 ай бұрын
Broo can’t believe you seen Dave casually cruisin so rad that car was insane too
@commonsenseisdeadin2024
3 ай бұрын
I mean they live in the same area and they are both humans...... 🤯
@arisstamatopoulos1331
3 ай бұрын
Cant you manufacture the component if you have the exact dimensions and material. Aluminium is pretty cheap and CNC is pretty accurate.
@Harry._.Thompson
3 ай бұрын
Ferrari might throw a hissy fit
@claytonstallings1514
3 ай бұрын
@Harry._.Thompson they can't really do anything unless he tries to sell them. Although they might penalize the shop for using "aftermarket" parts.
@deletedacc5728
3 ай бұрын
I was going to comment this as well. Getting the dimensions shouldn’t be difficult considering he has the damaged passenger side part as well as the drivers side for reference. And there are tools that can be used to determine the exact composition of the material if needed. I don’t even think it would cost him $1,000 to have done.
@lucamarini1113
3 ай бұрын
@@Harry._.Thompsonnah
@Sunheat79
3 ай бұрын
@@deletedacc5728 It would cost around 10k for doing a 3d scan, buying a block of aluminum and machining it.
@INDIANBEA5T
3 ай бұрын
It would be actually funny to see this video gets 240k likes lmao. Hopefully the strut tower get's sorted out. Maybe call mat armstrong he's got his connections
@DrivenHard
3 ай бұрын
Bro I started watching you when you got fired from your accounting job and I took a break for a bit and just decided to check out this entire episode. Glad I did! So cool to see how well you are doing 💪🏾🔥
@sydneymtbsteez
3 ай бұрын
honestly put the V12 from the 812 into the LM002 without an engine, would be pretty sick
@oriontackett7643
3 ай бұрын
Honestly that's maybe the best idea I've seen outside of the people commenting about 3d scanning parts and having them made instead of going through Ferrari. They would be sick af in the 002
@livinglife1089
3 ай бұрын
It won’t fit
@deimosphob
3 ай бұрын
You could do a tube frame chassis tied into a full cage, that way there's a whole new, stronger structure supporting the struts and protecting the driver. Just good luck passing inspection with that. Ontop of using that structure to mount the suspension, you could also modify suspension geometry like using cantilevers and longer control arms.
@simonhills7876
3 ай бұрын
This
@joshuawatson1604
3 ай бұрын
Doing the 812 repair the right way is best way! Love hearing about the repair James. Best of luck.
@slayraq2964
3 ай бұрын
So basically Mato.psd aka me was right if you want the car done you need to pay fat money to grt it fixed bcs you cannot do it all yourself ❤ all peace and love
@williammaillho1451
3 ай бұрын
Put the 812 drivetrain in the lm002. From one v12 to another.
@TheStradman
3 ай бұрын
I thought about that but I think I'd rather have a Lambo engine in the LM
@GermanEliteTuning
3 ай бұрын
Even when it’s bad news there is always good news when you post a new video 🤘🏻🤘🏻
@BassManBobBassCovers
3 ай бұрын
That's why I have such distain for supercar brands. There's absolutely no reason for it to be that expensive. They only charge that much because they can.
@trapofonidrillore185
3 ай бұрын
Woww I would have loved to have listened to the song “Dupe - Mbappe” in that car 😮😮
@ryanpeters9418
3 ай бұрын
Dave Kindig at 9:20 of the video. That's also his own car he made from scratch.
@Hearan.6176
3 ай бұрын
I thought I saw him lol
@Make-Asylums-Great-Again
3 ай бұрын
Looks a lot like a 53 corvette base.
@ICP1SBJ
3 ай бұрын
the Dually is Kev Dogg from the same show too. haha
@RASHIDDMC
3 ай бұрын
The Goonzquad X The Stradman 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
@sachamo100
3 ай бұрын
Stradling, get a dark cloth cover for your dashboard, that can be installed when you are driving the Aventador. Your retinas will thank me!
@T-bone_Malk
3 ай бұрын
Why is he bald in the thumbnail
@Whyyyy99
3 ай бұрын
That’s what I’m wondering
@Sborticus
3 ай бұрын
Exactly what I was thinking 😭
@kutloanomongale2958
3 ай бұрын
It’s a joke from his 2nd channel
@justinkimmiereaves9114
3 ай бұрын
He looks good bald lol
@coyster530
3 ай бұрын
If he watch his second Channel you'll understand why
@Drivewaygarage999
3 ай бұрын
I have an idea but it's a long shot, get an entire viper front end, and Frankenstein it.
@bruciy5590
3 ай бұрын
134 views in 0 seconds bro fell off
@craignel
3 ай бұрын
Stop being lame
@DomSr
3 ай бұрын
That lambo tape on the bubble wrap had me laughing way harder than it should 😂😂😂😂
@skeeo7393
3 ай бұрын
You could probably get an exact copy of the strut tower made in billet for the price Ferrari is charging
@angrymater13la
3 ай бұрын
The dually actually is widebodied. Most times when you run 22.5s or larger you get widebody rear fenders. I love that truck. I used to have a bagged and bodied version that was stolen
@turbot_
3 ай бұрын
You could do some crazy tube chassis on the 812 and still use the kit and do race car stuff. The engine in the truck would be so awesome.
@devengudinas1649
3 ай бұрын
You can’t weld tubes to an aluminum frame
@ksuscttmrrs
3 ай бұрын
Call SamCrac and talk to his frame guy
@LeeQuesada-CoTGaming
3 ай бұрын
Ferrari is probably about the most hated, yet loved brand of the car scene. Hated for their price gouging, pretentious attitude towards new buyers, and several other things, but those are the most prominent. Loved, because their simply one of the most Iconic brands known, and they have a tendency to produce some epic beasts of machinery.
@BAND-MAID-USA
3 ай бұрын
They don’t want their billions of dollars in R&D being messed with by shit parts out together on wrecked cars, by ppl that have no idea what they’re doing. Ferrari is protecting their name, history and products.
@hungryalien
3 ай бұрын
hated only by those who cant afford.
@killslayer1526
3 ай бұрын
I love how excited he was saying "If you wanna see me cut grass." 😂
@Belnick6666
3 ай бұрын
34500 USD ?? if you can get exact measurement, maybe ask how much it would cost to just make it? from like Titans of CNC in texas or something?
@krisiejamie9815
3 ай бұрын
Love the honest thumbnail James 😭
@codysteel3678
3 ай бұрын
I love your videos. This one is going to be a banger. I'm excited to watch. Keeping it up
@Belnick6666
3 ай бұрын
Did this dude not start by driving to McDonald in a gocart? He have come pretty far from driving a gocart and dreaming to own A supercar....... Have not hollywood asked to make a movie about his yet? lol
@hadax32fam60
3 ай бұрын
Love the consistency of your videos keep it up hope we can get more videos of you focused on your dad's truck!!!
@mattlopes1
2 ай бұрын
You can always mount the 812 on your wall if all else fails. Would be sick!
@DailyElectrician
3 ай бұрын
borrow one and have rob dahm or someone CNC you one?
@_LEGENDARY_EURY_
3 ай бұрын
I'm happy to see that at least the car is slowly getting better and closer to being done , just try to be patient with it and possibly you will find a solution to it , I'm super pumped to see your dad's truck and maybe....if you part out the Ferrari then that brilliant exhaust v12 would sound AMAZING in yours dad's truck , Lots of love brother STRAD 🖤🔥🤝!!!!!!!!
@Matthewsweeney8
3 ай бұрын
Love your videos James!! Keep up the great work! I’ve been here since the beginning!!
@marcusbarnes5929
2 ай бұрын
Just 3D scan the crappy over priced ferrari cast strut tower conponent ..and CNC machine a new better improved stradman stut tower made from billet highstrength steel...
@jeffersonspeight1410
3 ай бұрын
Loveing the videos keep it up James ❤❤
@draggy6544
3 ай бұрын
As a salvage rebuilder i can tell u most of the shops first check on the availability of parts then start buying the cars in bulk. For most manufacturer they will sell you anything and everything and for high production numbered cars most of that stuff can be bought third party as well not to mention the high number of used parts on the market. Nobody is out there gluing dashboards for normal cars or hand repairing strut towers
@PuffOfSmoke
3 ай бұрын
I'm curious, as a salvage rebuilder guy, do you think he's spending more money reparing it than buying a second-hand ferrari on the market?
@draggy6544
3 ай бұрын
@@PuffOfSmoke oh 100% also the effort, money, and time spent on this one car would be equal to rebuilding 20-30 normal cars. And when u realize there is no profit to be made it would make sense to stay miles away. Even as a youtuber i would have found experts to look at photos before purchasing and have an affordable way to source only then do u touch a project like this. And yes someone with 5-10 years of auction buying experience would have easily told him the level frame damage to expect through photos
@PuffOfSmoke
3 ай бұрын
@@draggy6544 I'm no expert but the moment he bought it a few videos before, I somehow felt it would hurt his bank account. But at the same time, I'm thinking if he films it building the whole thing, would his KZitem review be able to recoup all his Ferrari expenses. I guess you answer it. Thanks!
@draggy6544
3 ай бұрын
@@PuffOfSmoke the problem with that is the youtube shouldnt have to cover loses if he could be doing a break even type of rebuild the youtube revenue can be pure profit. But yeah u can see how one or two cars like this can bankrupt a small to medium sized shop. He also spent 40k on a body kit and probably 60k if u include the wide tires/wheels and building costs associated with the wide body. I understand that he was trying to make it so the car could be finished and get a widebody kit smoothly but he took a big financial risk. Him saying he doesnt have 70k cash is a scary situation.
@PuffOfSmoke
3 ай бұрын
@@draggy6544 true. I understand he's still paying for his house and it's still not finished.
@sleeperfs2651
2 ай бұрын
Ask Matt Armstrong or tavius if they would like to have a go to help you.Because they have been doing some great stuff.And it would be cheap for you and fun and you will get lots of likes
@jacoblizalde82
3 ай бұрын
Strad’s energy is contagious, always love watching🤙🏼
@naohyapz
3 ай бұрын
my fave youtuber in the world; keep it going man, i watched u when i was going thru a tough time and u really helped me get to the other side, thx bro
@E2005-c4j
3 ай бұрын
why not make an 812 superfast gt3 car, get a tubular chassis made, install all of the running gear etc, and you would save on interior parts as you could just get some bucket seats and you could still use the body kit that you brought
@ethanbennington
3 ай бұрын
James, man, I'm proud of you, keep it up brother!
@Ac3_fire
3 ай бұрын
If you can’t find a 812 superfast strut tower see if a regular 812 strut tower would fit
@Stigz34
3 ай бұрын
A regular 812?
@Ac3_fire
3 ай бұрын
@@Stigz34 what I meant was a strut that is similar or the same from a different car
@BrodyRicks-j2i
3 ай бұрын
Been here since your actual first video love to see your life change man
@Odinvizanski
3 ай бұрын
How, you opened this account 3 months ago
@sabersz
3 ай бұрын
@@Odinvizanskipeople change KZitem accounts all the time lol
@HellcatDreaminJosh
3 ай бұрын
TheStradman Great Video I'm sorry to hear that you're having a hard time getting parts for your 812 Superfast rebuild and I hope everything works out in the long run
@Itiswhatis234
3 ай бұрын
We all knew the 812 was a bad idea but we all love you strad!
@westynmundell
3 ай бұрын
I liked my own comment
@dentonsluder
3 ай бұрын
Put the v12 into the lambo truck
@IronPanther8245
3 ай бұрын
8:14 My Like Squad Brotheren, let’s make it happen! 😂
@ams.8958
3 ай бұрын
tempted to make 240k youtube accounts just to watch james shave his head on camera haha
@incredifall
3 ай бұрын
Get a kit car frame and put the 812 motor in it, or sell up and get a brand new 812.
@MISSYTHEBLACKLAB
2 ай бұрын
PUT THE 812 engine in the LM (Lambo truck ) that would be insane
@FKBtwistedJayde
3 ай бұрын
I knew this was a terrible idea the moment the video went live where u told us u got it to begin with. I appreciate you trying to give us different content man though. Better luck in your next endeavors and see you in the next one !
@MentalHealthHQ
3 ай бұрын
Is there no way to have a shop fabricate a piece? I think that’s the way to go honestly!
@D33BANZ
2 ай бұрын
250k… I could get me a first gen aventador for that 🥺🤦🏽♂️
@BatkoMahno
3 ай бұрын
THIS IS INSANE!!! I think bro should go to Lamborghini and fix it there, he'll ruin entire Ferrari advertising department. They'll regret they didn't donate this part for free for the project!
@ItsAgrim
3 ай бұрын
You should put the ferrari engine in the no engine Lamborghini truck
@RealtorAndy918
3 ай бұрын
Like your videos but you often prove money doesn’t buy experience. Just sell it and take your hit. Try something else and do some dang research before hand.
@TheStradman
3 ай бұрын
Of course it doesn’t but I have experience in other things that would blow people outta the water. I’m out here learning something new….cant be the best at everything
@STILLKINGSTON73
3 ай бұрын
Dude reach out to Mat Armstrong and Tavsrish.. #Think
@We_in_Miami
3 ай бұрын
4:47 you shouldn’t change anything in your dads truck. If I could’ve had my 2nd dad’s truck still I would cherish it and build it back to originality engine (heart of the beast) and interior. Don’t ever change your dad’s truck Strad seriously man cherish it never let go.
@ButterBoy316
2 ай бұрын
Soooo… how much would it be to put the 812 motor in the M2?
@uhavemooface
3 ай бұрын
Lets get those likes going because I want to see him as a bald guy lol.
@dominikmalysa2135
3 ай бұрын
Love the transparency James! We all make mistakes so don’t push yourself down about it. Do what you believe is the best for you!! Enjoy the holiday week!
Пікірлер: 3,3 М.