So Burt gets a full make over and George get a cup holder 😎🤣😂🤣
@RoysMotoVentures
2 жыл бұрын
Will that hold my wife's bottle of wine? LOL. Nice video and easy simple install. I need to get that and one for front of bike too, for me. 👍
@BaggersandBrews
2 жыл бұрын
Well Roy, it should hold a bottle but probably won’t hold a box 😂, we would appreciate clicking on the link below if you thinking of purchasing one, it supports the channel and doesn’t cost you a thing. 👊🏻
@dabeard_
2 жыл бұрын
Lol Only one way to find out. LOL
@nhmoosemtn6687
2 жыл бұрын
Was the first thing I added to my 20 Ultra at wife's request. That is after bars and pipes of course.
@dabeard_
2 жыл бұрын
Of course. 🤣
@BaggersandBrews
2 жыл бұрын
Happy wife……
@dabeard_
2 жыл бұрын
And they say we don't Wrench on our Bikes. 😂😂😂😂😂
@kenboody5616
2 жыл бұрын
What size torx is the most used on a harley? 🤣🤣🤣
@dabeard_
2 жыл бұрын
@@kenboody5616 everyone knows its the needle nose pliers
@neildewitt2869
2 жыл бұрын
@@kenboody5616 25
@HarleyFatBoyJr
2 жыл бұрын
Lmao
@davidsizemore2745
2 жыл бұрын
I have that cup holder for the wife and one for me. Love those cup holders.
@BaggersandBrews
2 жыл бұрын
Yes I have a mount in my bars as well.
@dabeard_
2 жыл бұрын
They are Nice!!
@rolandb.campos4535
2 жыл бұрын
The part that Comes down is where you snap on to the plastic ball. I’ve heard other people having this same problem. I’ll call Ciro , thanks again .
@ocglide2566
2 жыл бұрын
Ciro really does make the best cup holders IMO!!
@BaggersandBrews
2 жыл бұрын
We think they do for sure !
@davidsizemore2745
2 жыл бұрын
I tried the Ciro cell phone holder for your faring by the windshield. It sucks to say the least. I went with a RokForm.
@John-zo1wt
9 ай бұрын
Sooo, The bolts holding the speaker pod won't loosen, I'm assuming Harley engineers decided to save money and put nuts on the inside of the pod?
@BaggersandBrews
9 ай бұрын
Yes!
@papap.8006
2 жыл бұрын
I bought one for the Tri Glide and Luvy absolutely loves it.
@BaggersandBrews
2 жыл бұрын
That’s great!
@dabeard_
2 жыл бұрын
Whats Not to Love. Lol
@papap.8006
2 жыл бұрын
@@dabeard_If mommy’s happy everybody’s happy!
@emeryhvac1023
2 жыл бұрын
Good stuff guys. Ciro is great stuff!!
@dabeard_
2 жыл бұрын
Hell yeah Emery.. thanks
@BaggersandBrews
2 жыл бұрын
Thanks for watching Emery
@HarleyFatBoyJr
2 жыл бұрын
That’s a pretty heavy duty cup holder. Bad ass. Great share Fam. 🤙🏾🔥
@BaggersandBrews
2 жыл бұрын
Thanks for watching HFBj
@HarleyFatBoyJr
2 жыл бұрын
@@BaggersandBrews 🤙🏾🔥
@darrenlingerfelt5879
2 жыл бұрын
👍
@dabeard_
2 жыл бұрын
Thanks Darren
@hoefbowl
2 жыл бұрын
Just ordered one of these for my wife. I hope I did it correctly so you get the perk!
@BaggersandBrews
2 жыл бұрын
Yes we did! Thank you so much!
@neildewitt2869
2 жыл бұрын
I go to Chubby Cups for all my drink needs!
@james82744
4 ай бұрын
Does the cup holder arm put a bind on the tour pack lid when closing?
@BaggersandBrews
4 ай бұрын
Not at all
@This_is_My_Story
2 жыл бұрын
Does it cause a gap after installing it since it sits behind the speaker pod?
@BaggersandBrews
2 жыл бұрын
Not that I can notice. It's a pretty thin piece of flat stock
@HarleyFatBoyJr
2 жыл бұрын
🔥🔥
@marco-tiopet4020
2 жыл бұрын
👍sorry, i don't understand american language🥴 why put heat shrink tubing ? ✌
@BaggersandBrews
2 жыл бұрын
They made it two pieces so it can be mounted to either side of the bike, the heat shrink tubing will keep the screws from possibly scratching anything, that's just my opinion anyway.
@rolandb.campos4535
2 жыл бұрын
I bought the big ass cup holder after having it for 6 month it keeps coming down with even a 8 oz bottle of water . Do you have any ideas to fix it ? Or should I drive my car over it.
@BaggersandBrews
2 жыл бұрын
Well the obvious thing would be to make sure everything is tight, including the the allen on the top. Assuming it is I would call Ciro Customer Service 715-808-0027 and press option 1 at prompt . None of us have experienced this, and I have been rolling with the same one since 2019.
@johnlarson66
15 күн бұрын
I put a little bit if gorilla glue gel on the ball. It keeps it from moving. Most people I know experience the Big ass cup holder moving.
Пікірлер: 49