That 550 cord hack is ingenious. Not sure how I never thought of that.
@cassiuskinkade
2 жыл бұрын
Any officer who would comply with enforcement of mag lock laws should ask himself if he make his own firearms this dangerous. First thing you do to clear a jam or double feed is drop the mag. Oh wait u must crack open the gun while there are live rounds stuck in the chamber and or upper receiver. Nice process. Why would anyone want to do such a thing
@phil2082
4 жыл бұрын
Thanks, I hate it I don't ever want to epoxy something like this onto my gun
@phil2082
4 жыл бұрын
@JZDrumming Did you watch the video? They literally say you do. This device has to be "permanently attached" to comply with the law.
@tee.m7216
4 жыл бұрын
Patriot mag release is quite the oxymoron
@toamaiusdvignir9468
6 жыл бұрын
Not sure if you are aware, but gun being able to fire while receivers are apart is irrelevant. California "assault weapon" ban only applies to center fired semi-automatic rifles. Once you remove rear pin or crack the upper and lower receiver actions rifle is no longer a semi-automatic. Even if it did or could fire it will only do so once since it is in a single shot configuration. Epoxy is a good thing for this kit for our New York brothers and sisters. California does not require permanent installation. I am sure without the epoxy this is still legal. Tools to remove magazine like the bullet button is completely different. Repair of product I'd allowed, so using a tool to make adjustments or remove the patriot magazine is allowed. Also intent is the mlm most important thing here. If you intend to remove magazine without separating the upper and lower receiver, then you are breaking the law. Dropping magazine as intended by PMR is completely in compliance.
@RichardNixion357
5 жыл бұрын
California Anti-Gun Legislators:I'm gonna Step on Snek. Gun Inavaitors:Hmmm, Nope.
@GaryHartzell69
5 жыл бұрын
Does the screw removal demonstrated in this video work on the current version of the patriot mag release? I want to purchase your device and would like to reverse the fixed mag when I travel to states where fixed mags are not required per the law and easily re-install before I come back into California.
@davidd1066
4 жыл бұрын
This guy is the real patriot here
@vernievuitton
2 жыл бұрын
Hey man, does Patriot make something for the Kriss Vector?? I could really use one!
@fireupcal5435
4 жыл бұрын
I like that whats the name brand and where I could buy?
@49erfanoz
5 жыл бұрын
Yes but how do you remove the bullet button first?
@djeschke1
5 жыл бұрын
what size screw is installed with the button. i think you guys should of sent a couple more washers and possibly a little longer screw so it would be a tight fit for different size receivers. does anybody know the screw size? Hope the screw does not fall out.
@mattonyoutube
3 жыл бұрын
Much better solution than the AR maglock, can keep ambi mag release!
@tomnguyen1671
5 жыл бұрын
Can I install that kit to stag 15 mx ?
@nelsonflores2115
6 ай бұрын
How do you install king pin with spring or cord
@daryllmroberts7958
2 жыл бұрын
mine has epoxy in center of bullet button,,couldnt remove to get to screw,,maybe i didnt got deep enough
@brianford9106
6 жыл бұрын
Will the PMR make an AR pistol CA compliant if the 80% lower was properly engraved prior to July 1, 2018?
@ljmarino1
6 жыл бұрын
You had to have registered it as an Assault Weapon by 7-1-18. Now there is no way to legally do an AR pistol in CA. The kicker is that one of the features defining a pistol as an assault weapon is the magazine attaching externally to the pistol grip.
@ljmarino1
6 жыл бұрын
The other thing you should be aware of is that you could assign and engrave your 80% a serial number before 7-1-18, but you still needed to report it by 7-1-18 not as an assault weapon if it was featureless.
@codenameexoliby6020
4 жыл бұрын
How do you remove these!?
@acestacker5064
5 жыл бұрын
I wonder if you can apply a heat gun to that epoxy to remove it
@oceanhouse8080
5 жыл бұрын
It takes methylene chloride solvent to dissolve epoxy, aka carburetor dip
@ahoycoiner4789
6 жыл бұрын
so how do you drop the mag? With the Juggernauht addition you can drop the mag with the mag release once you separate the lower and upper slightly. I did not see in your demonstration what is the process once this is installed? or did i miss it? Please advise
@ahoycoiner4789
6 жыл бұрын
apologies, never mind i jumped the gun. Its at the very end. you
@aman450r
6 жыл бұрын
Yeah I'm also curious if it will work with juggernaut l, can't really tell if it will work since he opens it a descent amount
@NinjaAlex6r
5 жыл бұрын
can folks in California remove that washer to clear a double feed?
@cassiuskinkade
2 жыл бұрын
You can not remove the mag until the action open. The screw and washer in the back of the mag button inside the lower receiver is where you can access and remove the 2 making it work normal
@NinjaAlex6r
5 жыл бұрын
how do you take care of a double feed?
@voxpopuli905
5 жыл бұрын
It's a nightmare. These laws only affect law abiding citizens and it makes the gun dangerous
@cassiuskinkade
2 жыл бұрын
They hope the rounds go off in your face and hands so you'll never be able to use a firearm again. These tyrant's give 2 shits about double feeds or jamming of the action but they think they are making things safer smh. They are complete idiots and don't care about safety. They only care to disarm you or at minimum put your life at risk by criminals or possibly your own firearms. One would think the so called supreme Court or even the lower courts would strike all these mag lock hazards down based on the safety issues alone. Not to mention it's against your natural right to protect yourself and family from people that would come to harm or take your life
@chipmunk8344
4 жыл бұрын
i assume this doesn't work for NY? I think for us the mag have to be completely fixed in place
@nicklong436
3 жыл бұрын
im not 100% sure but im like 90%sure its legal in NY, i believe the reason its allowed to open is that you need to drop the mag is you have a t3 or t4 malfunction.
@chucknorris5141
4 жыл бұрын
Nice. Any idea if this is legal in NY?
@UkrainianBazooka
4 жыл бұрын
Not likely, the mag needs to be "permanently affixed"
@flyboymike111357
3 жыл бұрын
I actually live outside CA, but I think these setups are slick for guys who want to take their AR-15 hunting. You never know who you are going to meet out in the middle of the woods, and if you're going to be sleeping or you might need to set the rifle down, just pop and lock an empty mag in and this is a great security feature to keep the rifle from being used against you.
@daddoesthings9461
Жыл бұрын
Or just keep your rifle secure retard
@TheGrimCreeper95
4 жыл бұрын
Mine didnt come with the rear takedown
@timf2092
4 жыл бұрын
Does this Hack work if you are shooting 556, when you're not in Ca?
@benshiotsu8553
Жыл бұрын
If ur not in CA, you don' even need this.
@coreypotter1193
4 жыл бұрын
then the crafty trooper says hmmm whats the string do oh it makes mag release \...sorry son bubba gonna love you where I taking you
@billsixx
5 жыл бұрын
Why don't you show it with the ejection port dust cover open?
@jasd1183
5 жыл бұрын
Because this type of maglock is shit, get a better one that doesn’t require epoxy so you don’t fuck up your lower
@beesnakeable
5 жыл бұрын
because it is a centerfirle BCG
@YourWifesRealBoyfriend
4 жыл бұрын
@@jasd1183 The only thing this thing will fuck up is itself if you try and remove it. I use this. It's legit.
@andrewlaco1776
3 жыл бұрын
State of Jefferson when?
@vincentculletto39
5 жыл бұрын
Is this NY compliant?
@majorD01
6 жыл бұрын
Nice
@IrishFists
4 жыл бұрын
Is this legal for ny state?
@michaelmcpherson6033
4 жыл бұрын
IrishFists that’s such a hard question to answer and really there is no definitive yes or no.
@reviewswithdaniel7874
4 жыл бұрын
Can I use this with my 6.5 Grendel I live in ny
@cf6544
3 жыл бұрын
no one really knows, some use it
@cf6544
3 жыл бұрын
NYSP doesnt say what is legal and what isnt
@twiztid83222
2 жыл бұрын
Is this nys legal?
@cesaralatorre1106
5 жыл бұрын
Will this shit work with my LWRC?
@asron1294
4 жыл бұрын
Wow! This is absolutely ridiculous
@SuperSonofsatan
4 жыл бұрын
Good old California. ...
@DontTreadOnMe-ig3pc
3 жыл бұрын
This is the biggest joke I’ve ever seen thank god I don’t and NEVER would live in California
@derarztdrvvonp
Ай бұрын
😢v
@MIXERfun7
2 жыл бұрын
I fucking hate living in new york
@acewood7923
2 жыл бұрын
Right there with you fellow new Yorker, this is a true communist run state with some of the worst gun laws in the United States, can't even have a state Militia unless we intend on defending with bolt action and pump shotguns!!
@Rubijoyal
3 жыл бұрын
I would rather just violate the law and get a AR 15 that is not law compliant. Or just move out of Cominefornia
@brandonmorris8000
4 жыл бұрын
Sounds terrible
@Superabound2
4 жыл бұрын
California Don't how to party California Don't how to party
@fortunatos4323
5 жыл бұрын
poxzy my ass.
@rshinn8776
5 жыл бұрын
this is so stupid... not your product, but the laws. hawaii is trying to follow in your footsteps. hopefully i wont be needing one of these.
@danielgoldsmith6668
4 жыл бұрын
THIS IS A OLD WAY TO DO IT. don’t do this... it’s pointless. There are easier ways to do so. Search it up.
Пікірлер: 83