We need a 9 club episode where they go to his workshop for sure.
@BolermieWorldwide
3 жыл бұрын
YES! That would be amazing.
@SirThugMcNasty
3 жыл бұрын
yessssss please
@michaellorden8150
3 жыл бұрын
Absolutely
@BaxterDavis2365
3 жыл бұрын
I want Paul to help Chris get up on the courthouse.
@masonmcconnell9375
3 жыл бұрын
@@BaxterDavis2365 that would be a good watch also they need to make that happen
@bendegros
3 жыл бұрын
For anybody wondering here are some truck wheelbase specs for the top four truck brands. Widest to Narrowest: Venture Thunder Indy Ace There is about a half an inch from venture to ace with roughly one eighth between each brand. For example thunder and Indy are only about an eighth inch apart. Not as much as people think. Small measurements make big differences. My preference is 14.25WB with indys. Second favourite is 14”WB with venture highs. Once you start changing deck steepness, truck weight, truck height, wheel size wheel weight you get into a mind melting range of infinite possibilities. This is called “the madness”. My advice is, DONT GO THERE! Find what works and stick with it. Only make small changes once in a while. Sometimes it’s better to focus on your skateboarding instead of your skateboard. That’s my two cents.
@funkydankspliff
3 жыл бұрын
Ben please get on the nine club you are the best skate KZitemr
@jouhajohnny
3 жыл бұрын
You’re the best Ben!
@lp_6014
3 жыл бұрын
Found Ben!
@johncoleman7308
2 жыл бұрын
Yeah I thought half inch from Indy to Thunder sounded a little extreme.
@blankabison1331
2 жыл бұрын
indys are really heavy with even hollow axles who makes a mag truck with ti hollow axles
@jaygwynne6632
3 жыл бұрын
This shit is history. People will come back to this episode in years to come for reference and the rest. Paul Schmitt is a living legend and his contribution to literally every single facet of the the action and motion of skateboarding is undeniable. Best dude. Skateboarding.
@LinkMassing
3 жыл бұрын
Damm, you nailed it!
@tommccabe7351
3 жыл бұрын
"These are Thunders, but I skate for Independent." LMFAO
@perryleonard1348
3 жыл бұрын
Hahah anyone got a board with indies on it? Looks around no but I skate for indy though
@vulturebrain5123
3 жыл бұрын
Faustos are watching
@sk8erx0877
3 жыл бұрын
Koston used to skate indys while on Royal Corey duffel skated ventures while on ruckus
@marcusprince3999
3 жыл бұрын
In all fairness, Indys, Thunders, and Bullet Trucks are all made in the same factory by the same company (NHS).
@nyphon
3 жыл бұрын
@@marcusprince3999 Thunder is Deluxe.
@caseyaylward8853
3 жыл бұрын
I love how excited Roger gets when Professor Schmitt is on the show. He talked more this episode then the last five episodes combined
@theeturnone
3 жыл бұрын
so true. you can tell he really looks up to him
@kristensimonson7749
3 жыл бұрын
The way rog puts so much thought into landing a trick at almost 50 years old!! Love hearing his thoughts and feeling his dedication. Health and Happiness everyone!
@theeturnone
3 жыл бұрын
yeah, Roger is awesome !
@ReesgAnimator
3 жыл бұрын
Schmitt needs to be in Skate 4 as a character when setting up your board
@qwiktruks4325
3 жыл бұрын
Brilliant
@dillonu.4975
3 жыл бұрын
Lol that would be sick
@theeturnone
3 жыл бұрын
great idea
@dwightyawg7781
Ай бұрын
Sounds amazing & even better if he narrated the story mode
@timc-m7306
3 жыл бұрын
Chris "this is my symmetrical prototype" Professor Schmitt *hold my ruler*
@WolfWould
3 жыл бұрын
Met him once with his daughter and he was so cool to us. His knee was hurting like hell and he was still insisting on answering any questions my pals had.
@kevinodoherty5760
3 жыл бұрын
When he said "Gimme, Gimme, Gimme"..who else was thinking, "I need some more"...?
@dneck
3 жыл бұрын
DON'T ASK WHAT FOR!
@cappierising1774
3 жыл бұрын
Dr. Schmitt should just make a weekly 30min Video show called "Skate Talk, Tech Talk".
@DanielMiller-lt8ki
3 жыл бұрын
I'm glad you had the Professor back on. His first episode was my favorite interview on the Nine Club.
@mymotorbikeobsessions
3 жыл бұрын
As a mechanical engineer and a skater, the Professor interviews press are just the best!
@philipdahl8767
3 жыл бұрын
Literally was just talking about the professor and how crucial and awesome he is to skateboarding and how he is probably the last of his breed since big corporations are now going to have their money and interest in the sport. 3 HOURS!!!!! HOOO HEEE!
@andrewgrau6093
3 жыл бұрын
Plîlull000p00
@jakeambrosia5126
3 жыл бұрын
big corp isnt afraid of making great product tho. they will always need a skate nerd
@philipdahl8767
3 жыл бұрын
@@jakeambrosia5126 exactly my point. any new tech will be a guarded secret with restrictions on reproducing it and owned by the corporation instead of the engineer.
@adriansk8s
3 жыл бұрын
Chris "I haven't found a ruler long enough" Roberts
@thebongoplayer1535
3 жыл бұрын
Another 3 hours of Paul Schmitt?! You guys are awesome!
@theeturnone
3 жыл бұрын
agreed
@rmhfpv9225
3 жыл бұрын
I'm pretty sure Roger is Paul's son, heir to the Deep-Dive-Skater-Dynasty.
@Boric78
3 жыл бұрын
Yeah I am pretty sure Roger spent the next week rehanging all the boards and checking the fit on all the doors to his house.
@KBSimRacing
3 жыл бұрын
True love is the way Rog looks at Paul
@Boric78
3 жыл бұрын
@@KBSimRacing Yeah questions to where about of Paul Schmitt about 47 years ago have to be asked. Was he anywhere near Danvers ?
@Boric78
3 жыл бұрын
Edit - I do not have Prof. Schmitt levles of maths. He is not that old or Rog is too old...
@dstr3ss
3 жыл бұрын
Fastest click on a long time ... The professor is such an interesting guest
@stevesteele8836
3 жыл бұрын
I removed my hangers, and put two drops of sewing machine oil in the pivot cups to get rid of that annoying truck squeak. I thought I'd only watch a few minutes, and was captivated for the whole thing. The Professor is epic!
@marksantosLbC
3 жыл бұрын
Chris "I never been in a fight in my life" Roberts. I love Chris's self deprecating humor.
@Wladislav
3 жыл бұрын
I've been eagerly anticipating Paul's return to the Nine Club. Absolutely fascinating stuff, even though it can get very difficult to follow at times due to the archaic US measurement system. It's hard to overstate this man's importance in the world of skateboarding.
@matsvongegerfelt4007
3 жыл бұрын
For real, it's all so interesting but I cannot relate at all due to the strange figures
@Wladislav
3 жыл бұрын
@@matsvongegerfelt4007 Needed to have an online converter next to me while watching.
@davefreeburg7346
3 жыл бұрын
Oh hell yes! 3 more hours with Paul Schmitt?! My rainy Friday afternoon is officially booked.
@tkvideos1009
3 жыл бұрын
Where’s it raining? It’s hot as hell here
@datoad6787
3 жыл бұрын
1:39:27 "I wanna lean over and see the nut. " bruh kelly dying in the background! 😂😂😂
@RyanLynnWood
3 жыл бұрын
Blue nuts are the worst.
@datoad6787
3 жыл бұрын
@@RyanLynnWood so good! 😂😂
@RyanLynnWood
3 жыл бұрын
@@datoad6787 you got to get the money shot. 🤣
@datoad6787
3 жыл бұрын
Ryan wood that's the best part. 😂
@IWjake
3 жыл бұрын
Best guest ever. Professor Schmitt is so intriguing. I love all the science conversations. Y’all should do one with him and the neuroscientist together!
@muertoel
3 жыл бұрын
Yes💪🤘
@rmhfpv9225
3 жыл бұрын
Professor S almost validated Roger’s lust for bearing spacers but stopped short or mentioning that manufacturing tolerances for wheels can be off enough that the spacers don’t fit perfectly causing unbalanced pressure on the bearings.
@sbarbozag
3 жыл бұрын
“Get Roger over the curb.”
@rawxtir
3 жыл бұрын
Dope timing with Olympics yo. Get torque'd with nano tubes ::: this one dude is the glue from all eras of skating like no other. Cheers y'all.
@MickyThunderV
3 жыл бұрын
Roger is so nice and knows everything, love that guy
@jordanbowey4175
3 жыл бұрын
Paul, we need those slappy boards on the market!
@708Drojo
3 жыл бұрын
They got the professor throwing out the lil, he said “ it’s just a lil microclimate”
@FabianBarajas
3 жыл бұрын
Yes. This is what I needed
@BcottStudios
3 жыл бұрын
Met and talked to Paul for like 15 minutes at the Dew Tour in Iowa. Real cool dude
@DerAndreKanal
3 жыл бұрын
wooooooow coooooool
@BcottStudios
3 жыл бұрын
@@DerAndreKanal You’re damn fucking skippy!
@openm2ke_810
3 жыл бұрын
I’ve always loved the ‘board setup’ part of the stop and chat but this is taking it to the next level. I feel like I’ve learnt so much about materials, measurements, dimensions, trucks, bushings etc. It’s fascinating and also cool to see Crobs set up and Jerons.
@dcross8382
3 жыл бұрын
Jeron got a really 3D experience on this one.
@BenNarNar44
3 жыл бұрын
🤛
@memorysometimers3067
3 жыл бұрын
Smooookes
@armkidmustang
3 жыл бұрын
Listening to Roger engineer his boards is like seeing Formula 1 teams engineer their car setups constantly with little winglets and reshaping the wings stuff
@retrogore_videos
3 жыл бұрын
Kelly went the colour of his mug when he laughs. priceless
@sumshin36
3 жыл бұрын
Chris: “I don’t want a quiver of boards.” Made me laugh out loud alone in my house so hard for some reason. Such a good line.
@BearsBetterHaveMyHoney
3 жыл бұрын
He doesn’t get nearly enough credit in skateboarding
@preusbs
3 жыл бұрын
I love Paul Schmitt, the information he shares and has is so rad=}
@aiwendil83
3 жыл бұрын
Brand: "a collection of people putting out a perception"
@32srt32
3 жыл бұрын
chris roberts eyes when paul pulls out his bag of tools!
@jetwork131
3 жыл бұрын
I’m glad someone else appreciated that 😂
@brockdavismitchell7313
3 жыл бұрын
Paul is an incredible gentleman. I spent an afternoon with him and Mike V at his workshop while they dialled in Mike's shape. Paul was so precise and professional in his process, yet so patient with Mike as they searched for those little details that made such a big difference.
@P1Brand
3 жыл бұрын
Brock! I remember that day,
@brockdavismitchell7313
3 жыл бұрын
@@P1Brand Ah man Jason so rad to see you pop up on here! Working alongside you both was such a blast. Shoot me an email sometime (in my bio) would love to catch up!
@jeremybeavin9737
4 ай бұрын
Which board did it become?
@dotRllD
3 жыл бұрын
You can tell Paul loves talking about his work, nice one.
@tylerdurden6882
3 жыл бұрын
Paul needs to speak with the bones bushing people, their instructions explicitly say you don't need the washer at the bottom throwing off countless people's truck geometry.
@memorysometimers3067
3 жыл бұрын
YES!! Bones bushings do not work with indy trucks. If you put the stock indy bushings beside the bones you’ll see the bones are taller and changes the angle of hanger. If you want different bushings for your Indys get some of the Indy bushings. I ride the Indy blues on 159 and blacks on a 169. 👍🍻
@charlesradcliffe239
2 жыл бұрын
Geometry schmeometry. Aces without the bottom washer for life!
@James_cowley
3 жыл бұрын
Love the “I ❤️Canada” mug in the back!!
@sixish
3 жыл бұрын
Haven't even watched yet, but I loved the main episode on him, and I know for a fact I will love this.
@Damoforce
3 жыл бұрын
The washer under the bushing is going to be a game changer!
@chino581991
Жыл бұрын
I've never been more interested in learning about how each component of a skateboard can effect how it rides and reacts
@twofivetwoTV
3 жыл бұрын
chris needs to make himself some soundbites 😂 his facial expressions need to be made into gifs too
@facksmasheen
3 жыл бұрын
3:30 I'm remembering the last interview... take a drink every time Paul says "the r(e)ality is"... lmao. Love this dude.
@jaygwynne6632
3 жыл бұрын
Pissed
@facksmasheen
3 жыл бұрын
@@jaygwynne6632 lmao sorry if i ruined this one
@mohdhairudin86
3 жыл бұрын
Bring Ben Degros in Nine Club
@reza_dc2
3 жыл бұрын
he covers all of this on his channel
@samuelkoch349
3 жыл бұрын
Yes!
@funkydankspliff
3 жыл бұрын
Yes pls
@Arkansauce76
3 жыл бұрын
Fascinating man. Could listen to him all day
@DrakeLaing
3 жыл бұрын
This actually answered a few of the questions I have searched high and low ex. Grip tape under trucks…thank you guys so much for getting this man on the show!
@j-mac7401
3 жыл бұрын
Paul Schmitt along with the 1985 -86 Schmitt Stix Skate Team( Lucero, Joe Lopes, Monty Nolder) are like family members to me. Xmas of 1986 _ Santa Claus left me Schmitt Stix "Lets Go Skate" VHS tape. This video may not be praised like the Powell vids from the 80s or the classic Santa Cruz vids or the vids that came out 4/5 yrs after these and in my opinion changed Skating overnight : Both H Street vids ( Hocus Pocus and Shackle Me Not) but to me this 30min video was everything to me. If a friend came over back then to my house they would always want to watch it. Always good to see Paul talking boards and to be honest is the guy to go to when. It comes to skateboard decks.. . Oh shit!!! Paul brings up the video in the beginning of the show!!!!
@schoenlinggwunderbar
3 жыл бұрын
I’d love to drink a beer or wine with Paul and philosophy about Skate stuff. From engineer to engineer, his mind is just brilliant.
@Skatebetter
3 жыл бұрын
Dude is the Bill Nye of skateboarding
@mrfredo5069
3 жыл бұрын
I never had skateboard madness just whatever feels good but after this I'm defs gonna be analyzing everything on my board. Thank you professor, this is always such fascinating stuff!!
@Brian_Davies
3 жыл бұрын
at the part measuring chris' board. this is gold.
@DonnieEls
3 жыл бұрын
ive recently got my first twin tail deck, while it was good for nollie and fakie flip tricks, it completely eliminated my hardflips out of existence lmao. I learned hardflips on the nose back when a bigger nose than tail was the standard, could never do them on my tail. Brings me to the part where he talked about the meter while the shape can be good or enhance one thing it might take away from another. So the search continues for a deck that I can do all my tricks on.
@timothymurnane2626
3 жыл бұрын
Any time I see the professor I click know it's gotta be good
@Jarrett_Evans
2 жыл бұрын
Dude! My trucks have been squeaking for month! I’d take the bones medium bushing off, rub WD 40 on them and that would work for a couple sessions but then the squeak would come back. Took Proffesor’s advice on putting the washer under the bottom of my bones bushings and it solved it right away! So much good info here
@ricardogalvao3603
3 жыл бұрын
aweeeeeesome!!! PS is the best!!! every skater likes this technical stuff and setup conversation!!!!
@Thurston86
3 жыл бұрын
Anyone remember New Wave decks??? I had a couple of Baker and Flip decks with it back in 02! When new they slid so F’ing Noice! The waves would chip funny and the ones i had didnt last long but they were interesting. 🤘👽
@Thurston86
3 жыл бұрын
👽👍 Im glad that some people remember em! I don’t think they were too popular or they just didn’t take off.
@crazyconcrete
3 жыл бұрын
What a legend!!! The Professor blessing us with knowledge and insights left and right... Hats off!! May the skate gods be with you and bless you with health and wealth!!!
@bigspinshit
3 жыл бұрын
I was hoping it was atleast 3 hrs, thanks guys can't wait to check this out!!!
@DeafJackRussell
3 жыл бұрын
"damnit!...Kelly give me your board 😆 20 mins in and im already cracking up
@1toysoldier15
3 жыл бұрын
Schmitt is such a legend.Awesome episode.I didn't know your podcast existed until two weeks ago.You're all i've been watching for the last two weeks.Danny way,Vallely,Tommy g etc,bought it all back to me.I'm 49,started skating in1985,stopped in 1994,you've got me stoked on skateboarding again!!.i've just ordered a brand new set-up!.Mountain biking is gonna take a back seat for a while.Thank you for doing what you do,you're awesome dudes.peace.
@colw9383
3 жыл бұрын
I would love to hear his insights on wheels especially the effects of their shape and contact patch.
@jorgemontano4782
3 жыл бұрын
Awesome! I used to work for Professor Schmitt before I became a tattoo artist, greetings from Tijuana and long live psstix.
@gingerelvis
11 ай бұрын
Paul Schmitt is a really interesting and charismatic guest every time he comes on. A question that came to mind is has anyone ever tried diagonal plys and what would the affect of that be?
@Kefacrow
3 жыл бұрын
"A brand is the ego of everyone's prospective" -Paul Schmitt Running into the tree was "karma" I back this episode and I'm only an hour in...
@PatRiot-
3 жыл бұрын
Watched this channel for quite a while. The last interview with Paul was great. It had a different vibe than I’ve seen before on this channel. I feel like having one guy with a lifetime of experience really brought out the best in all of them. 👍
@lcrilley93
3 жыл бұрын
Love this I actually researched alot of the board companies and watched so many videos for my interview at a skate shop
@fieldengrey1
3 жыл бұрын
His first visit was one of my all time favorite Nine Clubs! So stoked to see this.
@Cryptvk
3 жыл бұрын
This is going to be a good one
@chrisweavers6253
3 жыл бұрын
I'd love to see a limited reissue of the Turbine wheels. If for nothing else than to hear what they sound like but I think they'd sell quick especially w/ the way collectors are at this point. I'd love a reissue of those rails too. Nine Club special edition.
@wforbes87
8 ай бұрын
I wish I could meet with Paul Schmitt every month to fine-tune my set up
@freddiehill5562
2 жыл бұрын
44 years old and have broke my humerus after dislocating. I have loved skateboarding since my Walmart variflex in 89 . Niw my 9 year old skated a thank you . I ride Baker and Flight decks . 8.38 baker and 8.75 Salman lion . I tried the washer under bushing on my flight deck with K5 black widows after I switched the Indy 169s out after I noticed the weight difference. I want to keep up with my 9 year old so my wife’s setup is a welcome with thunders , I have a Reynolds 8.38 with Ace 44s I think and a Frankie hill Re issue with the Indys . 5 boards 3 different brands of trucks . I’ve invested over 1,000 in skateboarding. We’ve tried grizzly , black diamond, MOB tape and doh doh bushings independent, bones . The one thing I’ve learned is setup matters to me . The professor and you guys are an awesome way to learn while I work. I’m hurt and can’t not skate after watching an episode . My skate park deck ( flight ) has 54mm 99 conical spitfires. I love them . My street , sidewalk , downhill has the slime ball 56 mm 78 a . My bearings I love the most is Quantum bearings . The isotopes . Shout out to Bone Yard skateshop in Auburn ,Al .9 club you guys are on fire 🔥
@deeg4n000
3 жыл бұрын
honestly i learned so much my brain is full for the day. so sick. thx guys.
@chentz7744
3 жыл бұрын
Crobs face and pause at 29:35 had me dying lol
@zerozero-dt2wv
3 жыл бұрын
Shortest 3 hours, this was so good.
@najtrows
2 ай бұрын
You need to do a "ask the Professor"-segment from viewers some day. Him and Ben De Gros could have a advice column for the Nine Club or something :D
@vnillaice01
3 жыл бұрын
Just got the Templeton board! #getRogerOverTheCurb now I'm tempted to drill the nose back
@psyopskateboards5638
3 жыл бұрын
Really glad to see this. Learn a lot from Paul every time he speaks on skateboard manufacturing.
@economicsandguitarsandsome1722
6 ай бұрын
It's like a billion years later but as somebody who rode those t-lock rails way back in the day ... they didn't work well. They'd slide off boardsliding a gritty curb. That's why they never caught on. They came out a good year to 18 months before rails really went away. That said, those type 2 (the shape he's showing) Schmitt Stix rails with sex bolts (not the t-locks) were the best ever made - to date. The plastic was awesome.
@cappy781
3 жыл бұрын
I love this show! I had a Schmitt stix with those rails,G&S trucks and oj 60mm wheels. What a trip this show takes my old ass on lol
@dreamjackson5483
3 жыл бұрын
Best guest. We need to learn about the boards we ride
@passenger-rider
2 жыл бұрын
Thanks guys for bringing Paul Smith back. 🙏 He is a real international treasure for skateboarding.
@HipstersAndHippies
27 күн бұрын
1:20:12 Stability in kingpins. Followed by correct bushing height and/or how squish from tighter setup affects the bushing sizing. how the angle of the hanger in the pivot cup. And how the contact points and pressure point on the bushings effects wear and pre tension. (Stored
@krisb.8702
3 жыл бұрын
This was an unexpected surprise to see this morning. Thanks guys!
@Z17xMachine
3 жыл бұрын
The Nine Club and Paul Schmitt rule!
@tyronelee8501
3 жыл бұрын
I love it when the sk8 prof is on, how about a Rodney Mullen episode?
@mothboyskater3793
3 жыл бұрын
Will never happen. I wish it would though.
@paulbrendanawicz4609
3 жыл бұрын
@@mothboyskater3793 What makes you say that? Just curious
@jemiiam
3 жыл бұрын
Thinking about it we get Wednesday's episode and then Friday we get these episodes but the rest of the week is a long time to not have any nine Club 😓
@coolcalmcloud363
3 жыл бұрын
Shout out Jeremy for knowing my pain.
@c0nsci0usness
2 жыл бұрын
1:15:08 the narrower your deck and trucks are the faster it will flip (kicksflips, etc). The shorter your wheelbase (considering both deck and truck combo) and deck length are, the faster it will spin (shuvits, etc). A lighter board will flip and spin faster. Of course you need to keep all of these specs within a range where it's still comfortable to ride the board and do other tricks as well.
@narrowistheway77
Ай бұрын
The first skateboard I ever owned back in the late 90’s was incredibly easy for me to do heelflips with but I had trouble doing kickflips with it, and after the board lost its pop I went and got a new deck and suddenly I could throw down kickflips no problem but I had a lot of trouble doing heelflips….. this mad scientist you guys have is probably the only person I know of that could explain the dynamics of this phenomenon to me 😂😂😂
@jnrbonezio
3 жыл бұрын
Love the way it's properly like a teacher class situation when they start laughing about nuts and stuff 😂 he's like come on boys settle down 😂😂
@TedEmpleton
3 жыл бұрын
Do Nine Club Create A Skate for a KZitem episode, Chris can figure out his twin tail board and Roge can get over the curb
@LinkMassing
3 жыл бұрын
We need more sweet, passionate people like Paul in this world. I am stoked my first board I. 1988 was a Lucero Schmitt Stix.
@yunglifty3523
3 жыл бұрын
easily my favorite episode yet. so much knowledge from this guy. definitely going back and watching his ep
@darklight4815
Жыл бұрын
Paul is such an awesome dude... I remember Schmitt Stix from way way back... always innovative...and apparently partially responsible for Nyjah's skating success ....solid guy Paul is and skateboarding is privileged to have him.
Пікірлер: 598