Badass, picking up my car from the shop today getting the same kit !
@samiedits2183
4 жыл бұрын
What exhaust are you running?
@maniacS550
4 жыл бұрын
Im running kooks 1-7/8 headers and corsa extreme, with double helix x pipe
@lifeonmars03
4 жыл бұрын
I should get my finalized tune for my gen 1 paxton tomorrow 🤗
@victorxavier9977
2 жыл бұрын
💯rock n roll🤘👊
@colbygraves9298
3 жыл бұрын
NGL I judged you slightly when you missed 3rd the first time... Then after that second rip... DAMN my mans can bang gears!
@maniacS550
3 жыл бұрын
Lol, takes some getting use to lol
@maniacS550
3 жыл бұрын
Unfortunately, after I busted the 2nd trans, im now sporting a th400, and 5k stall, and went to a smaller pully, and full e85, dyno was 876whp
@colbygraves9298
3 жыл бұрын
@@maniacS550 Yeah I saw that and I was a bit bummed but autos are faster... have you had it to the track or done a 60-130?
@maniacS550
3 жыл бұрын
@@colbygraves9298 car went 6.1 in the 1/8 so far, and I made 1 pass at 6.2 in 1/8 and 9.7 in the 1/4, but I lifted about the 1100ft area, because track has a really short stopping distance, and I also spun out the hole, and hit limmiter going into 2nd, and still went 6.2, so im hoping it's got a 6.0 in it
@colbygraves9298
2 жыл бұрын
@@maniacS550 what rear gear did you have in the car at the time you took this video?
@hunterwalker9311
4 жыл бұрын
How is the false knock so far if you don’t mind me asking? Do you have them de sensitize knock sensors? Or hasn’t been an issue?
@maniacS550
4 жыл бұрын
Absolutely nonissues. Knock sensors are still active, and timing capped atb23 degrees
@boosted9319
4 жыл бұрын
First!!!
@maniacS550
4 жыл бұрын
First is unless. Lol
@Suomyice
3 жыл бұрын
Hello I wanted to ask, if you run the 3.73 final drive when you run the MT-82 As a 2017 performance pack owner. With the 3.73 and the short transmisson ratios of the 15-17 cars.Along with the high reving nature of the Coyote. I have been wondering if something like Paxton would make more sense in what is a street only car. That would never see more tire then like a R888 tire and 91oct + a can of octane boost. Then to go with a screw blower and be unable to utilize all the bottom end torque it offers. Thank you
@txb283
2 жыл бұрын
What pulley were you running during this video?
@maniacS550
2 жыл бұрын
3.6 I belive it was
@txb283
2 жыл бұрын
@@maniacS550 did you have any other mods like headers or intake manifold?
@maniacS550
2 жыл бұрын
@@txb283 now im 3.33 pully, th400, crank sprocket, oil pump gears, 302 Boss manifold, fore inovations fuel system, msd 2-step, 1050x injectors, rods and pistons shortblock, 3.73 gears, full suspension, aluminum driveshaft, Bear drag front and rear breaks, 6pt watson cage, MMR drag wing, parachute, almost every BMR pice on the suspension, viking front and rear double adjustable shocks, BMR drag springs, kirky driver side seet, fabhouse fab seet bracket, hlly sniper shift light, hurst gate shifter, manual reverse valve body and transbreak, with 5000 9" FTI stall, and solid aluminum diff bushings, kooks headers, and gonna loose the AC system as well, going full max effort
@jazometa6752
2 жыл бұрын
@@maniacS550 any help with how you put the belt I’m putting a 3.33 on with a 100 1/4 green gates belt and everyone says walk but it won’t budge at all
@maniacS550
2 жыл бұрын
@@jazometa6752 make sure your idler pully is in the right hole
@TheKing-xh7gm
Жыл бұрын
How much for the total install I was estimating $10,000
@maniacS550
Жыл бұрын
total install on the paxton kit alone ?
@TheKing-xh7gm
Жыл бұрын
@@maniacS550 kit fuel system tune the whole deal
@maniacS550
Жыл бұрын
@@TheKing-xh7gm honestly, the blower kit I picked together, and fuel system about $2400, TH400 trans kit $7500, Shortblock was $5600, average Paxton kit about $7000
@TheKing-xh7gm
Жыл бұрын
@@maniacS550 thanks trying to get numbers before I pull the trigger
@danivaldes5953
3 жыл бұрын
Also how has it been any issues do you daily it thank you in advance for your time
@maniacS550
3 жыл бұрын
I actually have recently went crazy, im at 867whp and 17 psi, I play with the car now. But its definitely fun
@danivaldes5953
3 жыл бұрын
Wow thats crazy 😳 cool bro thanks for the info
@alvtuning5877
2 жыл бұрын
@@maniacS550 on the 2200?
@maniacS550
2 жыл бұрын
@@alvtuning5877 I went from the 18 manifold to a boss, see 16 psi on a 3.33 pully, and added a 100 shot of nitrous with transbreak and 2-step, I see 5psi off the break at 4500 rpm launch, and have nitrous set up on a 1 second ramp
@H1storybr3akdown
2 жыл бұрын
@@maniacS550 holy crap
@onetrickpony5884
3 жыл бұрын
What kind of numbers are you putting down?
@maniacS550
3 жыл бұрын
With mt82 I went 876whp on 16 psi, I busted 2 mt82 and now im TH400, and car went 9.7 and spun off the line, and I lifted at about 1200ft mark, and went 6.2 in 1/8, and later that night, I went 6.1 in 1/8
@danivaldes5953
3 жыл бұрын
Hey brother thinking of going paxton how do you make the whoosh sound so loud
@maniacS550
3 жыл бұрын
I have a max flow bypass valve
@danivaldes5953
3 жыл бұрын
Thank you fam
@FJTabb
2 жыл бұрын
Is this the stock one that comes with kit or did you mean the maxflow race ?
@david999938
3 жыл бұрын
Slow get a 3 valve
@maniacS550
3 жыл бұрын
Yup, she only went 6.1 1/8 @115 with a 1.45 60ft so far, so gotta do a little more
Пікірлер: 47