Mr. Cuervo so now if you want to tune with PC6 need to contact a oficial distributor and provide your mods for make the tune?.
@Dee_Ventures
Жыл бұрын
Is there a way to see how much fuel % is the quad getting while it’s on ?
@Striderexe
Жыл бұрын
Can i use the pc6 2015 version on my 2013 raptor 700? or are they entirely different
@NateHarrisCreations
Жыл бұрын
I bought a 2023 raptor 700r se what all would i need to do aftermarket exhaust?
@Seamedrumble125
Ай бұрын
Can this be used for a 770 kit
@lecteur4195
Жыл бұрын
? What benefits would i get on a 2017 Yamaha fz10 with the PC6? PLEASE AND THANK YOU
@rudycornelius5119
6 ай бұрын
How do you calibrate using the pc6?
@jake694537
Жыл бұрын
Is there a benefit to installing a PC6 on a bone stock quad with the base map of all zeros? I plan to do other upgrades in the future (all in due time and money). I got one when they were on sale and don't know if I should install it on the quad or wait until it's needed.
@maximusmax4557
Жыл бұрын
You may as well wait, but if you really wanted to, you could install it with an "all zeros" map. Though, I bet you'd see some benefits from using a "canned" map setup on a stock quad, but ultimately, you'll want a custom tune, no matter what. 😉
@chayannecastellano7221
5 ай бұрын
Is it true you can add 2 step on a pc6 for a 2022 raptor
@tutorialhelpdesk
Жыл бұрын
It is too bad that they made the PC6 like this. The Power Commander line gets a bad wrap without adding more reasons to have problems with it.
@zanettialvaro
Жыл бұрын
So.. If you could choose you would get the 5 instead of the 6?
@zanettialvaro
Жыл бұрын
I'll answer myself after some research. Yes, definitely the pc5 is a better unit with more capabilities (and less fake restrictions) than the "newer" pc6.
@shrugger1
Жыл бұрын
Everything I've owned has been carbed till now (700R), so I don't understand the ins and outs of these. Are you saying I can buy a mapped one from you if I provide the mods I make?
@MrCuervoRacing
Жыл бұрын
Yes. If the mod combination is something we have built or dyno tuned locally
@shrugger1
Жыл бұрын
@@MrCuervoRacing 👍
@christiaanhorton5097
3 ай бұрын
I just installed the following and need a PC6 map if you sell one: 1. Empire dual shortys with heat shield over speed sensor plug because that is what Empire said to do - though some plug it for 2021+ models and live with check engine light on… 2. Fuel Customs intake + box 3. AIS delete Any comments and if you sell a map for my set up, how do I get it? Thanks!!
@graysquirreltreeservice7299
Жыл бұрын
Should I switch to regular atv / wet clutch 10w40 oil for new engine break in ? I read the synthetic is too slippery to seat rings
@MrCuervoRacing
Жыл бұрын
Can switch as soon as you like
@graysquirreltreeservice7299
Жыл бұрын
@@MrCuervoRacing ty for quick response 😁👍🏻love your videos 🙌
@maximusmax4557
Жыл бұрын
"Too slippery." LOL
@251trill
Жыл бұрын
Changing the speed limit in configurate can change the speed of the bike?
@Thatmfz650
9 ай бұрын
What luck did you have?
@tutorialhelpdesk
Жыл бұрын
Are PCV maps importable into the PC6?
@mtncrvr1
Жыл бұрын
No - pc3/5 maps don’t work with PC6
@eager400
Жыл бұрын
So the only major difference is the pc6 has less features for the consumer side? What exactly makes them California compliant?
@MrCuervoRacing
Жыл бұрын
Nothing yet.
@Stoneman1270
Жыл бұрын
I'm getting my PC6 installed. Do I need to tune it myself or can I just plug and play?
@MrCuervoRacing
Жыл бұрын
Every pc6 needs mapping or it does nothing
@Abdulaziz-oo8zg
Жыл бұрын
@@MrCuervoRacing Same with the PC5? Or only PC5 is plug and play?
@maximusmax4557
Жыл бұрын
You can find "canned" maps that might be close, but ultimately, you want your PCV or PC6 custom tuned to your machine/setup.
@raymondmelaan1599
Жыл бұрын
Does autotune work on pc5 and 6?
@mtncrvr1
Жыл бұрын
I have the PC5 version AT-200 and it works fine with PC6
@PlugNico
Жыл бұрын
Is there a way to get the dealer software without being a dealer?
@zanettialvaro
Жыл бұрын
I'm interested in this too
@maximusmax4557
Жыл бұрын
Highly doubtful.
@yoursofullofitha7262
24 күн бұрын
Legit shops can get Pro tuning permissions
@user-vo3qb4vb6c
Жыл бұрын
can we change the firmware to turn the pc6 into a pcv ?
@yoursofullofitha7262
24 күн бұрын
No
@harunadmuz2020
Жыл бұрын
Hello I installed Power Commander 6 in r3 2020 and daynojet told me that they still don't have maps for a full exhaust and an open air filter. They told me that I need to go to the dealer. I bought from the USA.. and I'm from Israel. So you're telling me you can make me a map for this motorcycle?
@JamieS1992
Жыл бұрын
you need to find someone in israel who has a dyno to tune it for you, you dont want some map off the net
@yoursofullofitha7262
24 күн бұрын
You can contact any tuning center that has Pro permission.. if they have tuned a vehicle like yours with the same mods and have the tune in terrorist database..they can sell or send you the tune via email
@mrdreamers08
Жыл бұрын
were can i get a map?
@MrCuervoRacing
Жыл бұрын
Email me all the info to Sales@cuervoatv.com cost is 75
@mtncrvr1
Жыл бұрын
Really borderline false advertising on Dynojet’s part. Nothing in the product docs on their site showed this new “feature”. Also they don’t have many PC6 maps compared to their current PC5 map collections. Thanks for the vid though helps explain it well. May hit you up a bit later for a map / map review.
@jimwillis2698
Жыл бұрын
Can I get a premapped from you on my 700r?
@MrCuervoRacing
Жыл бұрын
Yes , call 951-743-6328 or email me @ Sales@cuervoatv.com
@jimwillis2698
Жыл бұрын
Thank you for the map,new stage 3 cam works great.
Пікірлер: 52