Thank you for posting this video !! Very Helpful !!
@AlexGoesSailing
Жыл бұрын
Great informative video!
@never2late454
Жыл бұрын
Great product. I've used it many times. I wonder if it can be used over gel coat repairs to get a smoother finish. I have problems with orange peel when spraying it.
@ecfibreglassuk
Жыл бұрын
it should work we have used this with polyester and vinylester resins so i cant imagine it wouldn't work with polyester gelcoat?.
@paulbriggs3072
11 ай бұрын
I did the bottom of my 3 meter rowboat with fiberglass over plywood. But not realizing the peel ply option, it came out gloppy looking with overfilled epoxy resin in many areas. surrounded by underfilled resin areas despite my best efforts at rolling. If I sanded the surface dull and put more resin on but Peel Ply this time, I'm guessing it would probably be too late as the underlying hardened epoxy is already thick and thin, correct? I probably need to fair with fairing compound and sand smooth.
@ecfibreglassuk
11 ай бұрын
HI Paul, the peel ply method leaves a good flat keyed surface ready for over coating with more epoxy and is more beneficial at the end of the laying up process. if you did sand back your epoxy and wipe it down with solvent or acetone to remove any grease or amine blush from the old epoxy you could just apply another even coat of epoxy without needing to peel ply?
@Sailor426
5 ай бұрын
I could hear you and completely understand everything in this short no nonsense video , now I know what this product does, well done ! Music was suitable for the video and absolutely no problem 👍
@ecfibreglassuk
5 ай бұрын
Thank you
@120abhishek
Жыл бұрын
Hello, our company is leading recycler of plastics in India. We have Tonnes of peel ply waste. It is impossible to remove the resin or the silicone coating from it. Is it possible to provide any solution for the same? It would be a great help for us.
@ecfibreglassuk
Жыл бұрын
Hi, it is fantastic that you guys are looking into this. Unfortunately however there isn't a solution we know of?
@ericlarson6343
11 ай бұрын
I am going to tell you about a product, but I am going make a bunch noise so you can’t hear me talk.
@ecfibreglassuk
11 ай бұрын
Hi Eric , thanks for the feedback, we've had this feedback on a few of our videos so all future videos will not have this annoying music on 😀
@sonvuvan1979
Жыл бұрын
cho hỏi vật liệu này ở việt nam minh ở đâu bán nhỉ ?
Пікірлер: 14