If this video helped you consider subscribing and sharing!
@quakerninja
2 жыл бұрын
Did you forget you taught us this two years ago.
@thedesignbrat
2 жыл бұрын
@@quakerninja some ppl haven’t seen it and are new here man shut up, let him create whatever he wants
@LisaAdams.75
2 жыл бұрын
@@quakerninja RUDE!
@fredericapanon207
2 жыл бұрын
@Will Paterson, Bezier curves are so powerful. Thank you for these great techniques. Nerdy trivia: placement of the stabilizer anchors is best on the inflection points of the curve, that is where the curve goes from concave upward to concave downward -- or shifts from concave leftward to concave rightward. And vice versa. And I thought Differential calculus was never going to come in handy, bwahahaha! (Inflection points occur when the second derivative of the curve becomes zero.)
@LaserHighway
Ай бұрын
When using the pen tool should my line stroke be centered/inside/outside, also what stroke? This always confuses me.
@LIFEOFADESIGNER
2 жыл бұрын
I've been designing for over 10 years and I've never seen the pen tool taught in this way! Stellar Job mate! You're another channel I watch to prime my day for my work! Long time subscriber, Looking forward to the next upload!
@willpatersondesign
2 жыл бұрын
Thank you so much :) I'm glad I can be of service :)
@terredee
Жыл бұрын
Me too, only it’s been more than 30 years. This is so useful. Thank you!
@roberthouston8332
Жыл бұрын
Word! This is going to save me alot of time. So glad I checked this out
@Aura_flow
2 жыл бұрын
I have NEVER thought to work on the curves piece by piece like that. Definitely just improved my workflow, thanks a lot Will!!
@bloomfire1998
2 жыл бұрын
Love this format! Would appreciate if you make more videos like this about different tools, menu, properties. This format is easy to digest and easy to find and access when needed (compared to a looooong video where you have to watch so much unnecessary content to find just a tiny information you're looking for)
@fredericapanon207
2 жыл бұрын
Bezier curves are so powerful. Thank you for these great techniques. Nerdy trivia: placement of the stabilizer anchors is best on the inflection points of the curve, that is where the curve goes from concave upward to concave downward -- or shifts from concave leftward to concave rightward. And vice versa. And I thought Differential calculus was never going to come in handy, bwahahaha! (The inflection points occur when the second derivative becomes zero.)
@ErikErosa
Жыл бұрын
Came here to say this! Also the extreme points correspond with the maximums/minimums of the curve (were the line changes direction from left to right or down to up for example) math ftw
@simonsmith8149
2 жыл бұрын
I wish that smart guides would activate when positioning handles so that you could be sure that 'symmetrical' curves were the same; for example, in your opening circle illustration, it's easy enough to make sure that the opposite anchor points are lined up (as when positioning anchor points the smart guides do kick in), but the only way I've ever found (and I'd love to be proved wrong !) to make the handles line up is to draw, say, a box where you want the handles to be, and then pull the anchor points out to touch the side of that box. ??
@hodaelmesawi
2 жыл бұрын
If I'm not mistaken you made a similar video years ago. I learnt to use the pen tool this way from that video before I started my design career. It was one of the most important things I learnt when I was getting in logo design. Thanks for sharing with us ☺️
@slamotte
2 жыл бұрын
I just find that video a couple days ago! I've been practicing using it, it's such a gem.
@roberthouston8332
Жыл бұрын
Professor Patterson! I appreciate your ability to explain the pen tool in layman's terms. This makes sense. I have struggled often with many unnecessary node adjustments my entire career. This was TRULY a golden tip. Thank you for sharing.
@OH.A.M.
2 жыл бұрын
Been using illustrator since 1991 and never sees to amaze me how many tricks this program has, if you now how to use it. Respect my friend!
@reflet1349
2 жыл бұрын
At school, just a few months ago, when I wanted to design a type logo and vektorize my handlettering sketch, my teacher told me I shouldn't do it because it would be too hard. This video taught me that I can really do it and it is easy. Thank You so much!!
@willpatersondesign
2 жыл бұрын
You're welcome! So glad it's helped :D
@reflet1349
Жыл бұрын
@@pleasejustletmebeanonymous6510 I don't know, but he's kind of weird in generell. Like he always convices every student in 2nd year to use InDesign for logodesign instead of Illustrator because the exams in 3rd year could include to design like a flyer, poster or whatever - things you normally use InDesign for. He really things it's hard to learn using two programs in those 3 years, while some student (including me) learn using at least 3 to 4. Even my teacher in UX/UI thought this is bs lmao.
@napostrophen
2 жыл бұрын
Great video and interesting way of using the regular guides as kind of placement markers where the points should go. Haven’t thought of that way before so I find it pretty useful
@willpatersondesign
2 жыл бұрын
Glad it was helpful!
@ItsJaynox
2 жыл бұрын
WILL YOU DID IT, YOU MAD MAN! Thank you so much!
@willpatersondesign
2 жыл бұрын
No problem! :D
@shidosensei.
2 жыл бұрын
And yet the almighty Will with another tutorial! Too bad I always end up watching your videos whenever I am _not_ near my computer. The urge to put that knowledge into practice. Thanks a lot for being here for us, Will.
@willpatersondesign
2 жыл бұрын
@dwilliams21
Жыл бұрын
I wish this video popped up the first time I touched the pen tool. I've been arting for like a decade now and been doing more and more vector with every year, but I'm still so clumsy and basic at it, but knowing there's optimal places to stick the little pieces MIGHT HAVE HELPED SHEESH! Thank you. :)
@billbowman8747
5 ай бұрын
I've been teaching this method for years. (The clockwork method.) Hands down the best way to teach the pen tool to beginners.
@LinauLee
2 жыл бұрын
Thanks, Will U always be teaching me sumpthin’ hUgz, Lee
@anitangshu_
2 жыл бұрын
Thousand likes if I could, I would have given. It was huge huge help. Very much appreciate, Will.
@willpatersondesign
2 жыл бұрын
Glad it helped!
@carlyart756
2 жыл бұрын
Super helpful and informative! I’ll definitely be implementing this technique. I can’t tell you how much I’ve struggled with wobbly lines using the pen tool.
@tulp_graphics
2 жыл бұрын
Love love love this video. Very helpful! I saw the short as well, but this more in-depth explanation is even better. Thank you for sharing!
@willpatersondesign
2 жыл бұрын
Glad it was helpful!
@BrianMarcWhittaker
17 күн бұрын
This is gold! Amazing tutorial. I will try it out. You made the tool understandable.
@santanaalexander5913
3 ай бұрын
hundreds of pen tool tutorials and you have nailed it! Newbie here and thanks for the guides!
@ladiesoflifeafter2913
2 жыл бұрын
I have been asking and asking artists how they decide where to add points because i really need to make my drawings flawless. And here you are with the perfect answer that makes perfect sense! Thank you so so so much
@southTXgoat
4 ай бұрын
I wasn’t sure what I was looking for when I searched pen tool for illustrator but this was it ! Thank you 🙌🏻
@anrymarchen
Жыл бұрын
Hands down the most useful video on the subject!
@iamtrazed
2 жыл бұрын
Gotta be honest guys, this is the best pen tutorial in the world, holy molly man, good job xD
@claudschgi4794
2 жыл бұрын
Pen tool is not dead :D :) awesome video in super quality :) Thanks
@willpatersondesign
2 жыл бұрын
:D
@armorstamp
Жыл бұрын
This is a game changer for me. My lines have improved greatly just by doing this. Thanks for this!
@abiolaolayinka2023
2 жыл бұрын
Okay so I normally frown upon the "You've been using [this] wrong" type of videos but dare I say, I HAVE been using it wrong. Thanks mate.
@ihajo
2 жыл бұрын
Thanks for the video, I am however lean towards curvature tool and drawing circles
@S0UPIE
2 жыл бұрын
Im mostly self taught and discovered this after extended use of the eclipse tool. glad im doing it the right way
@piyushbavalia6561
4 ай бұрын
simply superb. Its looks hard but its actually really simple!!! Thanks for the video and sharing
@VegasGuy1975
2 жыл бұрын
I’ve been using illustrator since version 7 and this is by far the most succinct and simple explanation I’ve ever seen on the exact way the pen tool was intended to be used, and how best to wield it.
@willpatersondesign
2 жыл бұрын
Glad it helped!
@VegasGuy1975
2 жыл бұрын
@@willpatersondesign your view on the pen too has definitely increased my efficiency with it. Thank you!
@meowzord
2 жыл бұрын
Pen tool first, then smooth tool x1000, right?
@willpatersondesign
2 жыл бұрын
hahaha
@JerryN7970
Жыл бұрын
That’s the way I’ve always worked the pen tool. I had always noticed how the handles looked on circles and tried to emulate that in my drawing. I never knew how far out the handles should go a lot of times though. But this was great reassurance that I wasn’t the only one that tried to draw shapes the same way Illustrator does!
@johnhawkins5513
Ай бұрын
The best Adobe Illustrator instructor! Best!
@Lostranis
2 жыл бұрын
I finally have good tips on that! My grades will get a bit higher! Yay! Thank you very much for this video ^^
@joelengblom8967
5 ай бұрын
Wow, i have looked around for tutorials on the pen tool and this was absolutely the best one!
@willpatersondesign
5 ай бұрын
Glad it was helpful!
@FurqanKashmiri
2 жыл бұрын
Really helpful..!
@willpatersondesign
2 жыл бұрын
Glad it was helpful!
@Jrizy.
Жыл бұрын
I’ve watched this video about 4 times now to try and absorb as much info as I can :| Love your videos and I’m very appreciative for them!
@willpatersondesign
Жыл бұрын
Happy to help! Hope what I said made sense!
@gloomygreyhound8669
3 ай бұрын
You just saved my life as an intern, thank you!
@FluffRat
2 жыл бұрын
I would agree with some of what was said, using fewer points is certainly important for getting nice smooth results, but I would disagree that one needs to align on a horizontal or vertical tangent whenever possible or that it is either "the way that vector works" or a "HACK". Sounds like a lot of folks didn't even know about aligning the anchors though, so I guess it helped those people.
@juliuslowe3684
2 жыл бұрын
DUDE, love your videos! Keep on doing it exactly like this, thank you.
@bcarse1
2 жыл бұрын
Hands down the best pen tutorial ever! Brilliant major thanks
@Kanect
Жыл бұрын
Very nice content. I was a tattoo artist and illustrator for 12 years now getting into some graphic design. Never understood why the app was called illustrator not photoshop design. I just use my iPad Pro and use procreate but finally giving AI a go. Very helpful
@GSXHeckler
2 жыл бұрын
It was just a few weeks ago that I thought I figured out the pen tool.😂 I will practice this. I usually end up with funky handles and not so smooth curves.
@jammiegoodwin9519
Жыл бұрын
I am pretty new to Illustrator, only knew photoshop. I have always struggled with the pen tool! I think I get it now!!! Thank you so much!
@willpatersondesign
Жыл бұрын
You are so welcome!
@DontPaws
2 жыл бұрын
Subbed after coming to this video via the pen tip short. LEGENDARY!
@willpatersondesign
2 жыл бұрын
Welcome!
@erko8620
2 жыл бұрын
Its eight in the morning and i need to get this very curvy logo done asap. And this just saved my noob butt. Thank you sir.
@tohotokejo72
Жыл бұрын
Thank you for explaining this thoroughly!
@lenamorgan6813
2 жыл бұрын
Pressing the direct selection tool and then the pen tool will set up a tool history so then you can alternate quickly between direct selection tool and the pen tool even faster by holding the alt key.
@poxyclypse
2 жыл бұрын
You can also just hit the a and v key to switch to the pointers, and the p key to swap to the pen. I do most of my tool switching with the keys. m to make rectangles, l to make circles. Lots of other too switches on the keyboard.
@fiercepandaz
Жыл бұрын
Also helps using french curves when sketching
@juansierra3885
2 жыл бұрын
amazing never thought of this !
@hadjjicus
2 жыл бұрын
need this
@doejersey
Жыл бұрын
Great video. Welcome to my saved videos for future use folder
@sadepennbrook
2 жыл бұрын
The endpoints you are referring to are called the extrema. The far extremes where the anchor point lies in balance. It’s a mathematical term.
@grafxdesigner93
2 жыл бұрын
Outstanding tutorial. Man, that's an eye-opener right here. Thanks for sharing this. Grateful!
@survivalsearcher
2 жыл бұрын
This explanation earned a solid subscribe
@catherineroy2480
Жыл бұрын
Fantastic tutorial and explanation! Easy to follow with the explanation for why - and what to look for!
@sloth451
2 жыл бұрын
Never thought about using the pen tool this way! Amazing and ty :)
@thesauce57
2 жыл бұрын
Finally, a content creator who showcases fundamentally sound practices over cheap hacks and destructive edits.
@leem6005
Жыл бұрын
Thanks, I've been struggling with the pen tool - this was extremely helpful!
@willpatersondesign
Жыл бұрын
You're welcome!
@mohammedshahidrahman8276
2 жыл бұрын
Awesome. I really never used it like this earlier. It helped a lot. Thank you so much!!
@PieterBrink
2 жыл бұрын
Excellent. As always! Thanks for your effort.
@AitenArts
2 жыл бұрын
Awesome as always Will. I have never used the pen tool this way. I mean if I have used the pen tool like this, absolutely it wasn't intentional. Lol..
@designs7047
2 жыл бұрын
bro, can you make full video about creating unique font using pentool... we love to see how you use pen tool hack effectively ..
@felipehonoriobs
2 жыл бұрын
clicked video thinking it would be something silly like "if you hold spacebar you can move the point" or some other less know shortcut. Was pleasently surprised. Kudos
@notmyname8527
Жыл бұрын
The best explanation! Finally
@willpatersondesign
Жыл бұрын
Glad you think so!
@IsaiahGarba
Жыл бұрын
Some of us use Photoshop so it would be nice if sometimes you also show how it would work on photoshop too
@victoriomarasigan9774
2 жыл бұрын
wait but on the counter space of the "a" you had no right angles, can you explain why your rule doesn't apply here?
@DarrenHodson
2 жыл бұрын
Thank you! Brilliantly explained
@juliekay3662
Жыл бұрын
Loved it,made it so much easier
@ArcaneVortex
2 жыл бұрын
First of all amazing tips, comes in very handy actually! About 3:33 I always wondered why you can't select two anchor points and just automatically make them equally long or extend them proportionally instead of trying to make them equal manually. Is there a trick for that too?
@The_Shadow_Chronicles
Жыл бұрын
Vital info, thanks!
@IsaacLungu
Жыл бұрын
This is incredible stuff! Subscribing because I've never seen a technique communicated and presented so clearly
@LisaAdams.75
2 жыл бұрын
Love it! I knew the rule of less is more regarding anchor points and making sure lines are vertical and horizontal but I had no idea to use them with the guide lines! Now I want to create a new logo for our own brand using this technique! Unless you want to ;) I designed our logo (not a logo designer) with my partners brief he gave me as a guide. That was almost 8 years ago! PS... its on the T-shirt i'm my profile pic! So many things going on with it and definitely needs an update!
@forgotten-vh3yr
11 ай бұрын
can I ask you how long took you to master pen tool ?
@donnathomas3312
Жыл бұрын
OMG! Wish Id known this when I was in school for design; I always HATED the pen tool. Nobody explained it right!
@finaldraftx
2 жыл бұрын
Love your channel. Question: in After Effects, those points are called vertices, not anchor points. I thought the anchor point was a singular point in space on a given layer defining the point from which a shape/object scales and rotates. Is this term different in Illustrator? Thank you! :)
@videogametherapy6465
Жыл бұрын
this video helped a hell of lot !!!!!!!! subscribed and thumbs up bro! Thanks
@willpatersondesign
Жыл бұрын
Awesome, thank you!
@imcat7495
2 жыл бұрын
Today I was thinking why Professioanls use Guides to make curves and logos in there projects now i know Cuase of you it will help ma a lot Thanks Sir I've learned a lot from you
@samvwani
2 жыл бұрын
Brilliant tutorial sir was really helpful 🙇🏻♀️
@jerinsebastian6906
2 жыл бұрын
Thank you for the awesome trick 👏
@Venice_Show
Жыл бұрын
Thank you Will. Nice presentation. What is this guide you pull down at 2:17? Bounding box and guides are new to this beginner.
@brucethomson1790
7 ай бұрын
Amazing explanation
@krystiancwelinski8744
Жыл бұрын
Finally thank you very much
@blasterxt9
7 ай бұрын
Thank you buddy 😊
@AsyaLogo
Жыл бұрын
inspiring, thank you. ❤
@burjeduro
Жыл бұрын
And YT's algorithm is showing me this now 😑 well, better late than never. Awesome tutorial! 👏👏👏👍 Promptly subscribed.
@dennissison6696
Жыл бұрын
this really helps man!
@sebabatsolethabo6864
2 жыл бұрын
i like, then watch after.
@AK-jl6jy
2 жыл бұрын
Good choice!
@danilomerola7110
2 жыл бұрын
and my friends are planning to make a ga and i'm making the soft, so tNice tutorials really helped
@karinabrandenburg8425
2 жыл бұрын
Thank you Will, this is amazing! You’re video has helped me work this out in my brain….we must think alike! 😽
@willpatersondesign
2 жыл бұрын
Glad it was helpful!
@jaysonfontela5761
2 жыл бұрын
💖
@bfjohnmark
Жыл бұрын
yah. somethings always off.. Thanks. Now weird shape gone!
@frankleemorris2431
4 ай бұрын
great tutorial, thanks a lot!
@willpatersondesign
4 ай бұрын
You're welcome!
@jterry126
2 жыл бұрын
mind blown! thanks.
@willpatersondesign
2 жыл бұрын
Glad it helped!
@csabilibu
Ай бұрын
Thanks!
@black-wolf5416
2 жыл бұрын
Thank you for tNice tutorials! I've been trying to figure the software out on my own for a wNice tutorialle, and it's horribly confusing. TNice tutorials is the only guide video
Пікірлер: 189